Procond Elettronica Service & Repair Forum

Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by Lebovich on 2006-12-08

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by Locke on 2005-09-22 23:37
The unit that appears to be causing trouble is the treadmill board within the Procond Elettronica MC-70 124438 equipment. It is behaving unusually and not functioning as it typically does.

—> Purchase or Repair:
Tengo una cafetera de Nespresso el cual tiene dos tarjetas:Procond Electtronica #3560102109Procond Electtronica #3560102059Desearia informacion que me puede ayudar, ya que controla el cafe, pero no la leche.Espero que me ayude e informe de los costos por reparacion .

—> Purchase or Repair:
#Procond Elettronica by michael on 2007-06-02 20:05
HelloI would like to test this module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this modulename of washing machine gyzer san gorgo modole number 3 560 332 07

—> Purchase or Repair:
#Procond Elettronica by KrisstiGreed on 2022-01-02 20:29
Two girls have no place to celebrate the new year, who will invite us? copy link past browser and write me twi.kz/K5Wl

—> Purchase or Repair:
#Procond Elettronica by Riconda on 2007-03-20 16:01
Please provide information on whether Procond Elettronica MC-70 124438 treadmill controller is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Procond Elettronica by LONNIE JOHNSON on 2007-10-05 20:05
The Procond Elettronica MC-70 124438 treadmill controller has malfunctioned, and a drive or board needs to be replaced.

—> Purchase or Repair:
#Procond Elettronica by Jaro Laine on 2007-02-08 20:32
I'm following up again regarding my Procond Elettronica MC-70 124438 treadmill controller issue. It's still not working. I need assistance with this as soon as possible.

—> Purchase or Repair:
#Procond Elettronica by raffaele on 2010-08-16 01:33
am looking for the replacement or the value of the ptc 2 which as a no ptc x240 L025 or the diagram whith the value of the componentvery gratefull asap please

—> Purchase or Repair:
#Procond Elettronica by Daviddoody on 2022-06-16 03:18
A large amount of people looking for a new job are unsure expediting veteran resume services constitutes a solid investment and this is a excellent puzzle, so we ought to first take a look at some of the every-day finishes that Commenced with executives that make the contract and use a on-the-ball r…Purchase or Repair: Ticket Image...
Show More
Ronco Scrivia, 06/09/2011Vi sarei grato se poteste inviarmi preventivo di spesa ed eventuale indirizzo di spedizione per la riparazione della scheda in oggetto.Ringrazio anticipatamente.Gian Piero Traverso

—> Purchase or Repair:
#Procond Elettronica by Phil Putnam on 2013-05-07 22:27
the Procond Elettronica 356033305 47-90 circuit board in one unit went down mid-shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by Ron Ledwell on 2011-07-29 17:27
NTE Part #\'s NTE145A and NTE5137A (about $2 each at a local Electronis Suppy Store. Fixed my Problem.

—> Purchase or Repair:
#Procond Elettronica by Marco Gualengi on 2007-07-19 20:25
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by volta on 2006-12-08 14:16
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or purchased? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Procond Elettronica by tamgho kevin on 2012-09-13 08:08
j\'ai besoin de savoir combien coute cette carte

—> Purchase or Repair:
#Procond Elettronica by Rodriguez. on 2006-11-27 14:20
Please provide an update on the status of the repair for my Procond Elettronica MC-70 124438 treadmill board. It is still not functioning, and I require assistance immediately.

—> Purchase or Repair:
#Procond Elettronica by JUGIE on 2019-02-05 19:38
HiI need schematic of this board Procond Elettronica 3560101029thanks

—> Purchase or Repair:
I urgently need assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still down, and we require immediate attention. Please respond

—> Purchase or Repair:
#Procond Elettronica by Ketan J Bhatt on 2007-02-08 18:32
Hi there, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. Can you provide repair information or suggest where we can find a replacement part? Thank you.

—> Purchase or Repair:
#Procond Elettronica by FERRATON on 2012-07-26 17:38
Bonjour Je recherche le module de procond elettronica 3560089039 Pour Un lave vaisselle FAGOR .pouvez-vous me communiquer le prix de cette pièce ?merci

—> Purchase or Repair:
#Procond Elettronica by Shovers on 2007-11-02 23:28
MC-70 124438 treadmill controller not responding to power.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 is a treadmill controller that is currently not working.

—> Purchase or Repair:
#Procond Elettronica by RAMIRO VEGA H on 2007-08-21 20:18
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Urgent for production needs.

—> Purchase or Repair:
#Procond Elettronica by George Katinios on 2013-03-09 08:52
Dear Sirs,Is it possible to tell me the value of R82 resistor or send me the electronic schematics? Thank you in advance,Best wishesGeorge.

—> Purchase or Repair:
#Procond Elettronica by Rajeev Nanda on 2006-06-22 10:34
The treadmill controller for the Procond Elettronica MC-70 124438 is malfunctioning, affecting the entire production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Dieter Pauwels on 2012-02-28 18:08
Hello GeoffI have the exact same problem. Did you find the answer?Thx

—> Purchase or Repair:
#Procond Elettronica by fraz ahmad on 2010-12-07 09:26
Hihow are you, hope you are doing very well. i have this part at home, the problem is this some z are burned-out. . ..and i cant figure what the exact , voltages and watts of these ZsDZ2,DZ3, DZ4 and D10i have rough guess abt these parts, like DZ2 and Dz3 = 24V 1 wattplease reply. . . . and tell me …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Ali Raza on 2006-12-18 06:04
Following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-operational. I expect a

—> Purchase or Repair:
Dear Sirs,please send your best offer for following items: GE INDUSTRIAL FILTERS: 1. TYPE RANGER 520-280 2 PC 520 V AC, 50-60Hz, 0345, 280A, 40 degrees C, 82480 high leakage current connect protective earth first 2. TYPE RANGER 520-450 1 PC 520 V Ac, 50-60Hz, 0150, 450A, 40 degrees C, 80447 high lea…Purchase or Repair: Ticket Image...
Show More
Me gustaria tener el diagrama electrico de su tarjeta con numero de parte 124438. Es posible conseguirla?

—> Purchase or Repair:
Could you please provide information on whether the Procond Elettronica MC-70 124438 treadmill board is still supported, and if parts are available for replacement or repair?

—> Purchase or Repair:
#Procond Elettronica by ABDELAZIZ on 2006-12-01 20:16
I am following up on the previous message regarding the Procond Elettronica MC-70 124438 treadmill board. The unit is still down. We need assistance with this matter as soon as possible. Please reply

—> Purchase or Repair:
#Procond Elettronica by Gerald Harman on 2009-07-23 16:55
Please repair and tesT under load for satisfactory operation. Believe burn out at DZ1, dz4a, dz4b LOCATION ON BOARD.

—> Purchase or Repair:
#Procond Elettronica by sarwar alam on 2006-06-10 21:11
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, leading to a disruption in the production line. We need immediate repair service to address this issue and resume operations swiftly.

—> Purchase or Repair:
#Procond Elettronica by Marlene Duval on 2012-09-09 20:53
Would be glad if you couldt help me with a schematic diagram for my ESAM4200.Cod.Procond: 454010272Cod.De Longhi: 5232121200Wk: 49/08 Op:0043 SW:7.2For your effort many thks in advanceWith kind regardsMarleneDuval

—> Purchase or Repair:
#Procond Elettronica by Lucien Huble on 2015-03-08 11:13
I have a faulty control board for EWF 1620 The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please? Thank you for your help.

—> Purchase or Repair:
#Procond Elettronica by David Richardson on 2006-11-08 12:57
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is needed to quickly get the line back up and running efficiently.

—> Purchase or Repair:
#Procond Elettronica by Frelka on 2007-05-23 02:29
I'm experiencing some issues with the Procond Elettronica MC-70 124438 treadmill controller. The machine seems to have stopped working correctly, and I'm not entirely sure why. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Procond Elettronica by ELBASSRI on 2007-06-02 14:41
HelloI would like to test this module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this moduleRef = Type P:451510051 F : 6210Type E: 12430392/5SW ver W2C01250 9/01THANKS A LOTBEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by JOHN BUSCHER on 2018-05-02 20:00
Machine error Error code E5 displayed on Procond Elettronica MC-70 124438 treadmill board.

—> Purchase or Repair:
#Procond Elettronica by SHIBAN on 2006-06-21 19:34
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning, impacting the production line. Immediate repair service is needed to restore operations swiftly.

—> Purchase or Repair:
#Procond Elettronica by THINH NGUYEN on 2006-02-22 16:57
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, halting production on the line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by Ajardy on 2006-06-22 18:34
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting production. Urgently need repair service to address the issue to get the line back up and running ASAP.

—> Purchase or Repair:
#Procond Elettronica by Jovan on 2006-06-10 15:11
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, resulting in a complete halt to the production line. Urgent repair service is required to restore operations

—> Purchase or Repair:
#Procond Elettronica by Seaweercepect on 2005-12-30 16:51
Procond Elettronica MC-70 motor controller is malfunctioning, causing a complete halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#Procond Elettronica by Vasanthkumar on 2007-10-06 14:57
Please provide me with information on the availability of support or replacement parts for the Procond Elettronica MC-70 124438 treadmill controller. Thank you.

—> Purchase or Repair:
I'm having trouble with the Procond Elettronica MC-70 124438 treadmill board. Something seems to have stopped working, and I'm not quite sure what the exact issue is. Thank you for your assistance.

—> Purchase or Repair:
#Procond Elettronica by Dieter Pauwels on 2012-02-28 18:08
Hello GeoffI have the exact same problem. Did you find the answer?Yhx

—> Purchase or Repair:
#Procond Elettronica by Sasa Todorovic on 2012-06-03 13:04
Hello,Is it possible to send me schematic datasheet for this module of washing machine Zanussi TurbodryProcond Elettronica 3 560 339 02Greetings,Sasa

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.