Procond Elettronica Service & Repair Forum

The board in the Procond Elettronica MC-70 124438 treadmill controller has failed, needs replacement ASAP. Please order a new one to ensure timely repair.

—> Purchase or Repair: Ticket Image

— Posted by karim on 2006-12-08

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 569 Comments

HI ThereI need a schematic over the above PCB. It is siiting in a Atlas NFS242 frezer

—> Purchase or Repair:
#Procond Elettronica by RAMIRO VEGA H on 2007-08-21 20:18
Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Urgent for production needs.

—> Purchase or Repair:
#Procond Elettronica by fabiana di porto on 2011-01-13 16:48
It seems that the Precond Elettronica 356084601 circuit of my Ariston LS 41 dishwasher is broken.Is it possible to buy a new one?How much would it cost?Thank youFabiana

—> Purchase or Repair:
procono electtronica part 413 26 016I need this part to fix a machine

—> Purchase or Repair:
#Procond Elettronica by Sonny Ta on 2006-03-05 20:13
I need to find out what is the repair or replacement cost for this part , part # 124438, and the turn around time if I send it in. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and Handling .Thanks.Sonny—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by A. Redd on 2007-12-22 19:29
Proform 725si (PFTL 72560) board ID 170-0518 rev. 2.Do you have replacement board (new or refurb.)? What is the cost to repair?

—> Purchase or Repair:
#Procond Elettronica by matt schuessler on 2013-02-23 13:23
the Procond Elettronica 356033305 47-90 circuit board went down mid-shift. Need someone to check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by Telecasterduv on 2021-11-30 03:37
reproduced by hand, in contrast

—> Purchase or Repair:
#Procond Elettronica by Shovers on 2007-11-02 23:28
MC-70 124438 treadmill controller not responding to power.

—> Purchase or Repair:
#Procond Elettronica by Hassan Sulaiman on 2019-07-30 05:47
Hello,I ve this Procond Elettronica card part no: 12430381/5 356084806 of which its functionality is suspect. How can I get it tested/repair and what's the likely cost if I send it across to you for test/repair?Plse reply via email.Best rgds.

—> Purchase or Repair:
#Procond Elettronica by Daniel Beck on 2005-12-30 13:51
The Procond Elettronica MC-70 141914 treadmill board is malfunctioning, causing a halt in the production line. Urgent repair service needed to resolve the issue and restart operations immediately.

—> Purchase or Repair:
#Procond Elettronica by FERRATON on 2012-07-26 17:38
Bonjour Je recherche le module de procond elettronica 3560089039 Pour Un lave vaisselle FAGOR .pouvez-vous me communiquer le prix de cette pièce ?merci

—> Purchase or Repair:
#Procond Elettronica by Monzur on 2007-10-10 17:40
The Procond Elettronica MC-70 124438 treadmill controller is not working and needs attention.

—> Purchase or Repair:
#Procond Elettronica by Niels Sylvest on 2020-09-04 14:35
I have a printcard it is mounted in AEG Electrolux Lavatherm TN95670is it possible to repair, so that machine can be used again, there is no light in the panel at all, and the repair man told me that the failure is in the computer/print.please inform me adress for repair of the card in Denmark—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by heri on 2008-11-21 04:54
Procon Elettronica 411514410 SH.047.p.F(x2)+0.68M2x0.00. p.F (Y2)+2x0.5mH250V 50/60 Hz-16A/40\'CHMF 25/100/21EN.133200

—> Purchase or Repair:
#Procond Elettronica by Lucjan Raubic on 2006-01-14 18:54
The treadmill controllers of Procond Elettronica MC-70 124438 are malfunctioning, halting production. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#Procond Elettronica by Numambsurka on 2006-06-22 13:34
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is needed to restore the line's operation swiftly.

—> Purchase or Repair:
I have a faulty board for the aeg 64811.pcb inside : 3560041139.Component D11 is broken, can you tell me the type please.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line halt. Immediate repair service needed to resume operations.

—> Purchase or Repair:
#Procond Elettronica by Ali Raza on 2006-12-18 06:04
Following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill board issue. The unit is still non-operational. I expect a

—> Purchase or Repair:
#Procond Elettronica by qmjLtxUZeNo on 2007-10-02 00:29
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by DAVID MARSH on 2009-11-20 10:11
I have a new GE Procond Elettronica Type P. 451510085 F:5065Type E. 124303975 SW Ver. W2C01551Electrolux Part Number 1321226746This is a new part (never fitted however the box is a bit tatty) it cost well over £100, as the part is of no use to me, would you know where I could sell it for a nominal s…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by paul wasson on 2007-04-21 02:47
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:
#Procond Elettronica by Evangelist on 2007-04-08 00:14
The Procond Elettronica MC-70 124438 treadmill board malfunctioned during the previous shift, causing unexpected downtime. I need a quick response before the next shift begins. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Moti on 2009-03-02 06:50
Wellcom! I have a burnt component ty1. I need the component no\' of this part.

—> Purchase or Repair:
#Procond Elettronica by Charles on 2008-04-12 02:36
I have the same problem with mine. If I could get a value on these diodes, I could replace them. I need DZ2 and DZ4. I would like to have a schematic on this board.

—> Purchase or Repair:
#Procond Elettronica by Maurice on 2007-06-01 07:50
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is experiencing unusual behavior - it's not functioning as expected.

—> Purchase or Repair:
#Procond Elettronica by Squierpzr on 2022-03-02 00:54
inventions of typography

—> Purchase or Repair:
#Procond Elettronica by Sergio Dratwa on 2007-11-13 06:23
Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by michael on 2007-06-02 20:05
HelloI would like to test this module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this modulename of washing machine gyzer san gorgo modole number 3 560 332 07

—> Purchase or Repair:
The treadmill controller Procond Elettronica MC-70 124438 is not functioning properly. It is exhibiting unusual behavior that is different from its normal operation.

—> Purchase or Repair:
#Procond Elettronica by Richard Montalvo on 2011-05-11 15:54
I need DZ1 and DZ24 diodes. Both appear to be burned. Can I repair them? Thanks.

—> Purchase or Repair:
#Procond Elettronica by YONIER PINON on 2006-06-20 17:32
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is urgently needed to resume operations.

—> Purchase or Repair:
#Procond Elettronica by Meyer on 2007-03-18 05:05
Hello, I'm inquiring about the pricing and availability of the Procond Elettronica MC-70 124438 treadmill controller. I'm looking to source one quickly and wanted to confirm if this is the correct model. Thank you!

—> Purchase or Repair:
#Procond Elettronica by al mccullough on 2006-06-23 06:34
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a major disruption in our production line. Immediate repair service is needed to get operations back on track.

—> Purchase or Repair:
#Procond Elettronica by PatrickvoB on 2022-05-19 20:44
An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.

—> Purchase or Repair:
#Procond Elettronica by Veliz on 2006-11-06 20:24
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line issue. Immediate repair service is required to minimize downtime and resume operations swiftly.

—> Purchase or Repair:
#Procond Elettronica by Sasa Todorovic on 2012-06-03 13:04
Hello,Is it possible to send me schematic datasheet for this module of washing machine Zanussi TurbodryProcond Elettronica 3 560 339 02Greetings,Sasa

—> Purchase or Repair:
#Procond Elettronica by IYAD on 2007-09-29 20:23
I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill controller. The unit is still down. Please provide assistance

—> Purchase or Repair:
#Procond Elettronica by iulian pintea on 2007-04-03 21:19
Hi there, could you provide repair information for a Procond Elettronica MC-70 124438 treadmill controller? It stopped working and we need a replacement. Thank you!

—> Purchase or Repair:
#Procond Elettronica by Seaweercepect on 2005-12-30 16:51
Procond Elettronica MC-70 motor controller is malfunctioning, causing a complete halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#Procond Elettronica by Tebbutt on 2007-10-04 13:28
I require urgent assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning, and I need someone to address the issue

—> Purchase or Repair:
#Procond Elettronica by Claude Coronado on 2007-04-24 20:20
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing delays in production. Please expedite repairs to minimize downtime on the line.

—> Purchase or Repair:
#Procond Elettronica by Ketan J Bhatt on 2007-02-08 18:32
Hi there, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. Can you provide repair information or suggest where we can find a replacement part? Thank you.

—> Purchase or Repair:
#Procond Elettronica by bratialav on 2013-04-04 06:47
Please for electrical scheme my Esam 3500.THANK YOU...

—> Purchase or Repair:
#Procond Elettronica by tahir on 2007-03-20 18:01
Hey, the Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Needs attention, please follow up during the day. Thanks!

—> Purchase or Repair:
#Procond Elettronica by Josephfug on 2022-01-12 00:21
I just want to say thank you for this great forum. I found a solution here on computer-cnc-repair.info for my issue.

—> Purchase or Repair:
#Procond Elettronica by herbert greene on 2006-11-06 15:36
The Procond Elettronica 452200190 KK88102678 board is malfunctioning, causing a halt in the production line. Urgent repair is needed to resume operations immediately.

—> Purchase or Repair:
#Procond Elettronica by Locke on 2005-09-22 23:37
The unit that appears to be causing trouble is the treadmill board within the Procond Elettronica MC-70 124438 equipment. It is behaving unusually and not functioning as it typically does.

—> Purchase or Repair:
#Procond Elettronica by Mukesh Mahato on 2007-04-24 21:20
Please provide an update on the status of my Procond Elettronica MC-70 124438 treadmill controller. It is still not working, and I need a response

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.