Anilam Service & Repair Forum
We have a bridgeport with the 1100 anilam control on it. About a year ago the feed on the x @ y stopped working. Not able to engage the servos. We had a repairman come in who told us that the board that controls the servos is out. Have been waiting for him to have this repaired but has not found anyone to repair it. Can you help or recommend someone or someplace to have this repaired or replaced.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → anilam error code 18 ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam error code 18 ↗
- Anilam → cmos memory ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → Anilam Cursador II ↗
- Anilam → Anilam 1100 control ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
Could you please provide information on whether the Anilam Wizard 150 70000291 is still supported or if parts are available for this unit? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am reaching out on behalf of my client who has an Anilam Wizard 211 A221200 Digital Readout Module that requires repair. Could you please provide information on the services you offer for this specific part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I experienced downtime with the Anilam Wizard 150 (70000291). The issue occurred on , causing production to halt. Can you please provide insights on what went wrong and how we can avoid it in the future? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam mini wizard A163-20000 XY Axis Controller is showing Error Code 1012. The equipment is down, unable to move in X or Y direction. Please advise on troubleshooting steps or repairs needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced unexpected downtime due to a malfunction with the Anilam WIZARD 211 A221300 Digital Readout Module. It occurred during today's shift. Can you provide guidance on how to address this issue before the next shift begins?
—> Purchase or Repair:
—> Purchase or Repair:
URGENT Anilam Wizard A166-2000000 issue drive or board failure. Need immediate attention.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing an Anilam Wizard 111 A1480111 DRO unit. Could you please provide me with information on pricing and availability? I am trying to source one quickly. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
I'd be happy to help you with your ANILAM WIZARD 450 A245300 encoder. I will reach out to the manufacturer to inquire about support and the availability of replacement parts for this older unit.
—> Purchase or Repair:
—> Purchase or Repair:
The screen on the Anilam Wizard 450L A245210 unit in the warehouse is displaying erratic behavior, not functioning as usual.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Anilam Miniwizard A163-2000 display unit. It seems like something may have stopped working correctly, but I'm unsure of the exact problem. Any assistance or guidance would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Anilam Wizard 211 A221200 Digital Readout Module is still supported or if replacement parts are available for this older unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Seeking repair for Anilam Wizard 111 A1480111 DRO unit. Screen isn't displaying any information, buttons unresponsive. Need urgent assistance. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
One of the PCB boards in the controller came off it\'s mountings during transport and was damaged. The servos do not power up and the release for Spindle operation is not enabled (even in Spindle manual). Do you need the electrical schematics that I have to make the repair?
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM WIZARD 450 A245300 is displaying error code E29, indicating an issue with the encoder. The equipment is currently down, and we need your assistance to diagnose and resolve this problem
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 digital readout unit went down mid-shift. Please follow up during the day. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 150 70000291 issue Drive or board failure during rounds. Requires immediate attention.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Anilam mini wizard A163-20000 XY Axis Controller available for sale or repair? Our unit is down, and we need to keep production running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am reaching out on behalf of my client who has an Anilam Wizard 211 A221200 Digital Readout Module that requires repair. Can you please provide details on the services you offer for this particular part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Wizaed 350+ A1920001 is not working. Please check.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime on Unit A1662000000 equipped with an Anilam Wizzard digital readout system. The issue occurred during the night shift on 03/15 at 200 AM. Can you provide insight into what caused the downtime? Appreciate your
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing issues with the ANILAM WIZARD 450 A245300, specifically with the encoder. It seems like something has stopped working properly. Any assistance would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
i have a milling machine with a anilam crusader when i start up the machine he gives a error 18 after 3 seconds and the x as moves 0.5 mm the machine have indramat servos please can you help me
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Series 1100 31900394 Control Unit in the warehouse is exhibiting unusual behavior. It is not performing its regular functions and seems to be malfunctioning.
—> Purchase or Repair:
—> Purchase or Repair:
Drive or board failure on Anilam A1920001 controller while on rounds, need immediate attention to resolve the issue and minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 450L A245210 screen be repaired or replaced? I'm trying to get this off my to-do list. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Equipment down with ANILAM 3000 TOUCH A7334029 controller showing error code or alarm. Need urgent assistance.
—> Purchase or Repair:
—> Purchase or Repair:
Hey there, we're in need of repair information for an Anilam A1920001 controller that stopped working. Can you please provide details on how we can get it fixed as soon as possible? Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizzard A1662000000 unit is not functioning. The maintenance team needs assistance with it.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide as much information as possible about the Anilam Wizard 450 A245200 screen unit. We will inquire about its support status and the availability of replacement parts.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm reaching out on behalf of a client who is experiencing issues with Anilam Wizard 350 Plus A1920002, which is a Control Unit. I would appreciate it if you could provide me with more information about repairing this part. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam 1100M A7010000 motor controller in the warehouse is not functioning as usual. It is displaying abnormal behavior, and I am unsure what the specific issue is.
—> Purchase or Repair:
—> Purchase or Repair:
My ANILAM WIZARD 450 A245300 encoder unit is malfunctioning, and I need it repaired as soon as possible to avoid any production delays. Seeking assistance from a qualified technician who can quickly diagnose and fix the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A30250 control board is displaying Error Code 115. The machine is currently not responding to any inputs and is producing a continuous alarm sound. Immediate assistance is needed to resolve this issue and get the equipment back up and running.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Patriot A1480001 digital readout unit is not functioning properly. Please have someone from the maintenance team take a look at it.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update on the status of the ANILAM 3000 TOUCH A7334029 unit. It is urgent that we get a response this time. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing an ANILAM WIZARD 450 A245300 encoder. Could you please provide me with information regarding pricing and availability? I am looking to source this unit quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm reaching out on behalf of a client who's experiencing issues with an Anilam Wizard A1662000000 digital readout. Could you please provide some information on possible repairs or troubleshooting steps for this particular model? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing trouble with the Anilam Wizard 111 A1480111 digital readout. It seems like something has stopped working, but I'm not sure what exactly. Any assistance you can provide would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, I hope this message finds you well. I'm interested in purchasing the Anilam Electronics Corp. Series 1100 31900394 control unit. Could you please provide information regarding pricing and availability? I'm looking to source one quickly. Thank you in advance for your assistance. —> …Purchase or Repair: 
...
Show More
Show More
I have a Anilam Crusader II on my Milling Machine not working plz help me to know weather I can Retrofit an other unit with minimun change in parts and also tell me where I can get a complete Repair Manually of this THANKS OMAR AZHAR RANA
—> Purchase or Repair:
—> Purchase or Repair:
I have no docs on servo power wiriing. Enable servo power on back of the crusader to does nothing. Do I have to reverse eng. this thing???
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: