Advance Industries Service & Repair Forum

do you have the light board that plugs into the 116220d timer board

—> Purchase or Repair: Ticket Image

— Posted by scott wilson/doortech on 2011-08-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Volpe on 2009-12-23 00:34
The Advance Industries 116220 D 107243-0002 board went down mid-shift. Please follow up during the day.

—> Purchase or Repair:
#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Cecilia Lobos on 2009-11-09 13:40
Hello, I hope this message finds you well. I am inquiring about the Advance Industries 116220 D 107243-0002 board. I would like to know if it is possible to have it repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
Dear Sir/Madam,I am looking for a part that you have in store. That is part model no. 116220 D. I would like to know how much this part will cost me.I am looking forward for a reply.yours sincerly, Nando Semeleer.

—> Purchase or Repair:
#Advance Industries by Amy L. Jones on 2014-11-01 18:57
Circuit board in the Advance Industries 116220 D 107243-0002 just failed - need a replacement ASAP!

—> Purchase or Repair:
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Strube on 2009-12-24 12:33
Do you have a board available for Advance Industries 116220 D 107243-0002? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Crispian on 2009-05-23 15:59
The Advance Industries 116220 D 107243-0002 board malfunctioned and caused downtime today during the afternoon shift. Need resolution urgently.

—> Purchase or Repair:
#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by coflienoblofs on 2009-12-03 23:32
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Needs checking first thing in the AM. - Night shift team

—> Purchase or Repair:
#Advance Industries by ken castro on 2009-03-11 10:11
I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair:
#Advance Industries by Peter Komrhel on 2009-11-25 17:15
Hello, we are in need of repair information for the Advance Industries 116220 D 107243-0002 board. Could you please provide us with details on how we can get this fixed as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by rodriguez on 2009-12-08 15:51
Can the Advance Industries 116220 D 107243-0002 board be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Carmona on 2009-10-26 12:23
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Production is down and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#Advance Industries by Nicolas Arbelaez on 2009-05-21 23:29
I believe there may be an issue with the Advance Industries 116220 D 107243-0002. It seems like the board is not functioning properly. I recommend having a technician take a look to diagnose the problem accurately.

—> Purchase or Repair:
#Advance Industries by Tibbetts on 2009-03-17 00:45
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair:
#Advance Industries by Ethan on 2009-11-20 19:54
The board on our Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in our production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Advance Industries by Steve Tryon on 2015-07-20 09:20
Hi, our Advance Industries 116220 D 107243-0002 gate control board is displaying error code E7 and the gate is not responding to commands. We need urgent assistance to get this equipment back up and running.

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by Rotolo on 2006-11-08 21:57
Hi Repair Service Team, the control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, affecting the production line. Please address this issue urgently to resume operations

—> Purchase or Repair:
#Advance Industries by Toniolli on 2009-03-09 18:49
The Advance Industries 116220 D 107243-0002 board is not functioning normally. It is displaying unusual behavior and not performing its regular functions.

—> Purchase or Repair:
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-04-02 13:14
I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Cherrington on 2015-08-10 00:20
Hello, our Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E05 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Ann Ratay on 2016-02-10 02:03
We have 2 overhead garage doors........... but no remotes. They are both Model 55A Garage Door Opener System by The Overhead Door Co. They were installed about 1985. Wondering if there are replacement remotes we can purchase anywhere.Would appreciate any information or help you could provide concern…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by sumesh on 2009-07-19 20:15
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. I was told to get this fixed or replaced, but I'm not sure what it does. Can this board be repaired or purchased as a replacement? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by martin zarate on 2005-12-30 01:51
The logic timer board on our Advance Industries 116220D 107243-0002 is malfunctioning, causing an interruption in the production line. We need immediate repair service to rectify the issue and resume operations swiftly.

—> Purchase or Repair:
#Advance Industries by Nabil Ghanem on 2009-11-18 09:51
The Advance Industries 116220 D 107243-0002 board is malfunctioning, causing a complete halt in the production line. Urgent repair service is required to address the issue

—> Purchase or Repair:
#Advance Industries by Reichling on 2009-12-03 08:09
The Advance Industries 116220 D 107243-0002 is malfunctioning. It is a board unit, but I'm not entirely sure about its function.

—> Purchase or Repair:
#Advance Industries by J.Y. on 2009-10-14 20:43
The Advance Industries 116220 D 107243-0002 unit is still down. Please provide an update as soon as possible.

—> Purchase or Repair:
#Advance Industries by nardini on 2009-10-05 07:41
The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair:
I need a status update on the Advance Industries 116220 D 107243-0002 Circuit Board. The unit is still down. Please reply

—> Purchase or Repair:
#Advance Industries by Tibbits on 2009-03-11 02:11
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by PARDI on 2009-02-13 13:46
the Advance Industries 116220 D board in unit 107243-0002 went down mid-shift. Please check it out and troubleshoot in the morning. Thanks!

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by Guibord on 2015-08-07 12:20
The Advance Industries 116220 D 107243-0002 gate control board is not functioning correctly.

—> Purchase or Repair:
#Advance Industries by Raskar on 2009-11-10 01:23
Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Temitope Egunjobi on 2014-11-28 17:16
The Advance Industries 116220 D 107243-0002 unit is currently not functioning. Maintenance team is aware and investigating the issue.

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by Larry Freeze on 2011-06-13 20:56
Would like information on the purchase of two remote units. The main door remote unit has lable #107224-0002. The other unit was run over by the car and is unavilable. Please send info on how to purchase replacable items . Thank you Larry Freeze 302 Guava Pl Brea, Ca. 92821f

—> Purchase or Repair:
#Advance Industries by Leonce Collins on 2007-01-13 16:23
Need logic board 116220DModel 107243-0002Do you have that availableLeonce Collins504-722-4729

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:
#Advance Industries by RAEMISCH on 2009-07-22 21:46
Advance Industries 116220 D 107243-0002 is displaying error code E345. Equipment is not powering on. Need immediate assistance to troubleshoot and resume operations.

—> Purchase or Repair:
#Advance Industries by Golub on 2009-10-22 20:59
Advance Industries 116220 D 107243-0002 is down with Error Code E12 indicating a board issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.