Allen Bradley Service & Repair Forum

Machine displaying "HIM Communication Error." Driveshaft not rotating, no response to controls. Production halted.

—> Purchase or Repair: Ticket Image

— Posted by frank auditore on 2010-03-22

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Allen Bradley"

If you need your Allen Bradley unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 86 Comments

#Allen Bradley by Hollingsworth on 2023-11-05 11:35
Issue Allen Bradley 2094-BL50S Line Interface Module malfunctioning, causing a critical delay in production. Urgent repair and replacement needed to resume operations immediately.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by JOHN CAESAR on 2008-05-20 17:29
HI, this control is on a supermax ycm-40. the control does not power up.when power is applied to the control nothing happens at all untill the reset button inside the clam shell is pushe then the display says checking memory then goes blank and nothing further happens. I think there may be a simple …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Allen Bradley by frank auditore on 2010-03-22 00:00
Machine displaying "HIM Communication Error." Driveshaft not rotating, no response to controls. Production halted.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by rberson on 2019-07-09 18:50
Hello, I have a client with an Allen Bradley 2097V34P5 Kinetix 300 Servo Drive that needs repair. Could you please provide information on the repair process and cost estimation? Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Betta Wu on 2011-12-01 08:37
Hi Sir, Good day. We are the R.C.S.I of Allen-Bradley and we are looking for the obsoleted part for AB Bulletin 1334. Pls refere to the attachment. There are total four pcs of board in the driver and we need these four plates, especially the power supply board. If you have stock or used surplus comp…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Allen Bradley by jim schuppe on 2025-05-15 04:14
The Allen Bradley 1785-L40BK/C is currently not working and the maintenance team needs assistance with it.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Chansac on 2025-05-19 18:29
We experienced downtime due to a failure in the Allen Bradley 813.91.01 PFB P/C Board on . Need quick resolution before next shift.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Larson on 2025-05-28 18:40
Do you have an Allen Bradley 1746-P3/A (AB SLC500 PLC Power Supply) available for sale or repair? Our production is reliant on this unit, and we need to resolve the issue quickly.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by D S Somase on 2021-07-13 00:00
Allen Bradley 2711-t10c8 displaying a blank screen upon startup. Seeking repair service, expertise with troubleshooting display issues required.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Vlado Mijajlovic on 2012-05-20 00:00
Allen Bradley 1772-lxp-c showing a blank screen upon startup. Need a technician to diagnose and repair

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by fernando rodriguez on 2025-05-15 16:31
Hello, could you please provide repair info for the Allen Bradley 13365-AQF50-AA-EN10 DRIVER BOARD? Our equipment has stopped working and we urgently need a replacement or repair. Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by MARK MEDINA on 2016-07-02 07:26
Do you have a replacement Allen Bradley 20F1A-N-D-248-AA0NNNNN POWERFLEX 753 available for sale? Our unit went down, and we need to keep production running. Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by N.L.C.A.Gunasekara on 2014-05-11 00:00
Getting an unknown error on Allen Bradley 22A-D8P7N104 POWERFLEX 4, impacting production line. Urgently need repair service to diagnose and resolve issue to minimize downtime.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Dan Keeler on 2025-05-24 07:55
Do you have an Allen Bradley 1492CAB001H69 available for sale or repair? We need to keep production running smoothly and our unit is down.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Leo Orciuoli on 2007-01-26 01:53
I have 6 abb powerflex 70 drives that were damaged because of a voltage surge/spike.1 - 1hp, 1- 3 hp, and 4 - 10hp. Please provide info on repair options.Thank You

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Jack Bohland on 2024-11-21 02:18
I think there might be a problem with the Allen Bradley 1756-ir6i, as something seems to have stopped working. Unfortunately, I'm not entirely sure what this model does, but I believe it's causing issues with the machine. Your attention to this matter would be greatly appreciated.—> …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Allen Bradley by total on 2022-08-25 18:00
Please advise if the Allen Bradley 1747-L542 SERIES C PROCESSOR UNIT is still supported or if replacement parts are available. Our team is looking to find a replacement or repair option for this unit, but we are uncertain about its availability and manufacturer. Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Samir yousfi on 2025-05-27 22:30
Looking for a technician to repair an Allen Bradley AM7662 2 channel SSI interface module for a Compa system. Need assistance with troubleshooting the unit, currently experiencing issues.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by MERLE HOOVER on 2025-05-14 01:03
Please provide us with the availability, lead time, and pricing details for Allen Bradley part number 1336EMC2SP31B/B, which is a MAIN CONTROL MODULE. Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Decio on 2023-07-21 19:46
We experienced a downtime incident with the Allen Bradley 1789L60 SoftLogix5860 Controller in the 16-slot virtual chassis. Need a quick explanation before the next shift.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Jawahar K on 2023-07-19 12:05
I would like to inquire about the availability of Allen Bradley 1440-TB-H Terminal Base for XM-161 Module. Our unit is currently down, and we need a replacement to keep production running smoothly. Please let me know if you have one available for sale or repair. Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by cross on 2019-09-07 02:49
The Allen Bradley 156484/02 is displaying Error Code 54. Equipment is not powering on despite multiple restart attempts. Please advise on next steps.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Sophe on 2009-10-04 00:00
The Allen Bradley 2706-C11J8 is not powering on. Need repair assistance.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by John Malchow on 2022-01-05 15:43
Hello, I'm inquiring about an Allen Bradley 1492XIM2012016RF Wiring System, Digital Interface Module with 20 Pins (Master Only) for my client. Can you please provide information on troubleshooting or repair options for this specific module? Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Dwight Oram on 2015-11-19 00:00
Allen Bradley 1747-l532-e not powering on, no lights or display. Need repair assistance urgently.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Nilo D. Dahingo on 2018-01-23 00:00
Allen Bradley 151091 showing no power or display. Need immediate repair assistance.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Tom Hamilton on 2025-05-19 01:05
I have observed an Allen Bradley 592-C1FA unit in the warehouse exhibiting abnormal behavior. It is not functioning as expected.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Guy Spiller on 2025-06-04 06:44
The Allen Bradley 6169IDEC/A disk controller card for PCD2 is causing equipment downtime. The system is displaying Error Code 101.urgence

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Bob Walker on 2019-09-26 22:08
Allen Bradley 150A650NBDA/B controller displaying error code 7E Motor not responding, production halted.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Sven Rookie on 2025-05-17 20:24
I'm reporting a unit downtime issue with the Allen Bradley 8000GC processor panel interface module. Can you provide some insight into what may have caused this and when it occurred? Thank you!

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by voltronics on 2021-10-16 00:00
Our Allen Bradley 1203-GD1 is still down and we need assistance immediately. Kindly provide support as soon as possible.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by stephen donnelly on 2025-06-07 07:15
Drive or board failed on 1771DCM/A module. Need replacement ASAP.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Carrie on 2009-02-18 18:43
Allen Bradley Control 8600. Time out alarm kicks on and shuts down machine when want to run it.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Nouman on 2025-05-30 12:30
Can the Allen Bradley 1492XIM2012016R be repaired or purchased? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by edward havertong on 2016-12-01 19:23
The Allen Bradley 6181P-15TP2KH operator interface in the shop is not working.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by robert gaudry on 2007-10-21 00:00
Allen Bradley 1746-hsce-a showing no display or response. Need assistance identifying and resolving the issue

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Luis Ivan Calderon D on 2020-02-24 18:47
The Allen Bradley 40794-450-01-nnn3 is displaying Error Code 3023.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Dawn Pierce on 2017-04-23 08:17
the Allen Bradley 1771M1/A stepper controller module went down mid-shift. Need someone to check it out first thing in the morning. Thanks!

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Saldanha on 2005-07-13 00:00
I'm having trouble with my Allen Bradley 8520-ASM3 MACH TOOL PANEL. It seems to have stopped working suddenly. Any help would be greatly appreciated.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Dan Sperry on 2007-10-16 11:27
Sirs , I have a 7360 that keeps shutting off , the 5 volt is at 4.7 to 4.8. Is that enough to cause it to shut down ? How can I adjust the 5 volt to 5.1 as the book says ? Do you repair these or do you have one for sale?

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Gajanan on 2025-06-01 14:50
Hi there, we have a malfunction with the Allen Bradley 2198-E1004-ERS, a Kinetix 5 Servo Drive. We need repair information urgently. Can you provide details on where to send it for repairs? Thank you!

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Arcangel on 2009-07-06 00:00
Issue Allen Bradley 1606-XL240E-3/A POWER SUPPLY failure causing production downtime. Urgent repair needed to resume line operation ASAP. Symptoms include loss of power to critical equipment. Need immediate diagnosis and resolution to avoid further delays. Prioritize service to minimize impact on pr…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Allen Bradley by innes on 2008-08-27 00:00
The Allen Bradley PLC-5/40 CONTROLLER is not functioning properly and needs attention.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Mike Wood on 2025-05-19 00:37
Please could you confirm if the Allen Bradley 20VB00460 Precharge Board Frame 10-12 60 is still supported? If not, do you have any options for replacement or repair?

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Dan Sperry on 2007-10-16 11:20
Sirs , I have a 7360 that keeps shutting off , the 5 volt is at 4.7 to 4.8. Is that enough to cause it to shut down ? How can I adjust the 5 volt to 5.1 as the book says ? Do you repair these or do you have one for sale?

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by J.den Dekker on 2025-06-04 22:02
Hello, we are in need of repair info for an Allen Bradley 1771-igc module. Can you provide assistance or point us in the right direction? Thank you.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by Declan Farrelly on 2022-08-02 05:00
Hello, the Allen Bradley 1771-IAB AC/DC Input Module is showing error code E15 and is not detecting any input signals from the connected sensors. Equipment is currently down due to this issue. Please advise on necessary steps to resolve this problem.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by rock on 2024-06-15 16:20
The Allen Bradley 1336-L7E unit is not functioning properly. It has features like Control Interface 1336, Contact Closure, and Encoder Loss Detect. More details may be needed to diagnose the issue accurately.

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by mohamad on 2011-04-22 20:42
powerflex 70 have input but no have out put and him no have display and sts led no have any indication light

—> Purchase or Repair:
➡️ Reply
#Allen Bradley by kayalpsok on 2024-10-27 16:33
The Allen Bradley 150SD2NBR/A SMC-50 Solid State Motor Controller 420A unit is not working, as informed by someone in the shop.

—> Purchase or Repair:
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.