Allen Bradley Service & Repair Forum

Drive or board failed on 1771DCM/A module. Need replacement ASAP.

— Posted by stephen donnelly on 2025-06-07

Reply🗨️Ask a New Question Below❓

If you need your Allen Bradley unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 86 Comments

#Allen Bradley by Dan Keeler on 2025-05-24 07:55
Do you have an Allen Bradley 1492CAB001H69 available for sale or repair? We need to keep production running smoothly and our unit is down.

—> Purchase or Repair:
#Allen Bradley by frank auditore on 2010-03-22 00:00
Machine displaying "HIM Communication Error." Driveshaft not rotating, no response to controls. Production halted.

—> Purchase or Repair:
#Allen Bradley by Mike Wood on 2025-05-19 00:37
Please could you confirm if the Allen Bradley 20VB00460 Precharge Board Frame 10-12 60 is still supported? If not, do you have any options for replacement or repair?

—> Purchase or Repair:
#Allen Bradley by Enrique Marín on 2024-06-03 15:09
Unit Allen Bradley 2090-UXBK-D1515 (Breakout Board Kit, Motor Fdbk, Cn2, Ultra X000, 15M) experienced a technical issue causing downtime today. The exact timeframe was between 230 PM - 315 PM. Can anyone provide insight into what went wrong before the next shift comes in?

—> Purchase or Repair:
#Allen Bradley by Larson on 2025-05-28 18:40
Do you have an Allen Bradley 1746-P3/A (AB SLC500 PLC Power Supply) available for sale or repair? Our production is reliant on this unit, and we need to resolve the issue quickly.

—> Purchase or Repair:
#Allen Bradley by Decio on 2023-07-21 19:46
We experienced a downtime incident with the Allen Bradley 1789L60 SoftLogix5860 Controller in the 16-slot virtual chassis. Need a quick explanation before the next shift.

—> Purchase or Repair:
#Allen Bradley by Antonio Cristo on 2024-11-19 02:48
We have a critical issue with our Allen Bradley 6180-ADDBEFACDCZ Ser A Operator Interface. The screen display is flickering intermittently, causing major disruptions on the production line. Immediate repair service is required to avoid any further downtime.

—> Purchase or Repair:
#Allen Bradley by MARK MEDINA on 2016-07-02 07:26
Do you have a replacement Allen Bradley 20F1A-N-D-248-AA0NNNNN POWERFLEX 753 available for sale? Our unit went down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Allen Bradley by Tom on 2005-09-18 12:31
Do you repair Allen Bradley 1333 or 1336 Drives?

—> Purchase or Repair:
#Allen Bradley by stephen donnelly on 2025-06-07 07:15
Drive or board failed on 1771DCM/A module. Need replacement ASAP.
#Allen Bradley by Harinder Sehra on 2024-09-30 17:12
I can help you with that. I will draft a message inquiring about the support and availability of parts for the Allen Bradley 1771-KX1. Thank you for providing the description and details.

—> Purchase or Repair:
#Allen Bradley by cross on 2019-09-07 02:49
The Allen Bradley 156484/02 is displaying Error Code 54. Equipment is not powering on despite multiple restart attempts. Please advise on next steps.

—> Purchase or Repair:
#Allen Bradley by fernando rodriguez on 2025-05-15 16:31
Hello, could you please provide repair info for the Allen Bradley 13365-AQF50-AA-EN10 DRIVER BOARD? Our equipment has stopped working and we urgently need a replacement or repair. Thank you.

—> Purchase or Repair:
#Allen Bradley by Guy Spiller on 2025-06-04 06:44
The Allen Bradley 6169IDEC/A disk controller card for PCD2 is causing equipment downtime. The system is displaying Error Code 101.urgence

—> Purchase or Repair:
#Allen Bradley by John Malchow on 2022-01-05 15:43
Hello, I'm inquiring about an Allen Bradley 1492XIM2012016RF Wiring System, Digital Interface Module with 20 Pins (Master Only) for my client. Can you please provide information on troubleshooting or repair options for this specific module? Thank you.

—> Purchase or Repair:
#Allen Bradley by Jawahar K on 2023-07-19 12:05
I would like to inquire about the availability of Allen Bradley 1440-TB-H Terminal Base for XM-161 Module. Our unit is currently down, and we need a replacement to keep production running smoothly. Please let me know if you have one available for sale or repair. Thank you.

—> Purchase or Repair:
#Allen Bradley by VERAIN on 2025-04-23 01:27
The unit connected to the Allen Bradley SKH1SINFB1A0/A interface board in the warehouse is exhibiting abnormal behavior by not functioning as it usually does.

—> Purchase or Repair:
#Allen Bradley by elbruss on 2014-10-05 00:00
Allen Bradley 1785-LT2 displaying error code E3, not powering on. Need immediate repair assistance on industrial unit.

—> Purchase or Repair:
#Allen Bradley by Nilo D. Dahingo on 2018-01-23 00:00
Allen Bradley 151091 showing no power or display. Need immediate repair assistance.

—> Purchase or Repair:
#Allen Bradley by Sarath Fernando on 2016-12-15 00:00
Experiencing display issues on Allen Bradley 1400e 2711e-k14c6 f unit. Need immediate repair assistance.

—> Purchase or Repair:
#Allen Bradley by Carrie on 2009-02-18 18:43
Allen Bradley Control 8600. Time out alarm kicks on and shuts down machine when want to run it.

—> Purchase or Repair:
#Allen Bradley by Sven Rookie on 2025-05-17 20:24
I'm reporting a unit downtime issue with the Allen Bradley 8000GC processor panel interface module. Can you provide some insight into what may have caused this and when it occurred? Thank you!

—> Purchase or Repair:
#Allen Bradley by Dottore on 2024-09-07 08:06
Do you have an Allen Bradley 1336s-bx040-an-en-l6 available for purchase or repair? Our unit has gone down, and we need to keep production running.

—> Purchase or Repair:
#Allen Bradley by noland cambridge on 2022-05-05 17:56
The Allen Bradley 1769-PA4 is not functioning properly. Please review and troubleshoot. Thank you.

—> Purchase or Repair:
#Allen Bradley by N.L.C.A.Gunasekara on 2014-05-11 00:00
Getting an unknown error on Allen Bradley 22A-D8P7N104 POWERFLEX 4, impacting production line. Urgently need repair service to diagnose and resolve issue to minimize downtime.

—> Purchase or Repair:
#Allen Bradley by sekar on 2019-07-22 08:50
Experiencing communication errors with Allen Bradley 1770-KFD DH-485 interface. Equipment down, displaying a 'No Response from Device' error. Need urgent assistance to troubleshoot and resolve.

—> Purchase or Repair:
#Allen Bradley by Saldanha on 2005-07-13 00:00
I'm having trouble with my Allen Bradley 8520-ASM3 MACH TOOL PANEL. It seems to have stopped working suddenly. Any help would be greatly appreciated.

—> Purchase or Repair:
#Allen Bradley by Declan Farrelly on 2022-08-02 05:00
Hello, the Allen Bradley 1771-IAB AC/DC Input Module is showing error code E15 and is not detecting any input signals from the connected sensors. Equipment is currently down due to this issue. Please advise on necessary steps to resolve this problem.

—> Purchase or Repair:
#Allen Bradley by D S Somase on 2021-07-13 00:00
Allen Bradley 2711-t10c8 displaying a blank screen upon startup. Seeking repair service, expertise with troubleshooting display issues required.

—> Purchase or Repair:
#Allen Bradley by Arcangel on 2009-07-06 00:00
Issue Allen Bradley 1606-XL240E-3/A POWER SUPPLY failure causing production downtime. Urgent repair needed to resume line operation ASAP. Symptoms include loss of power to critical equipment. Need immediate diagnosis and resolution to avoid further delays. Prioritize service to minimize impact on pr…Purchase or Repair: Ticket Image...
Show More
#Allen Bradley by MERLE HOOVER on 2025-05-14 01:03
Please provide us with the availability, lead time, and pricing details for Allen Bradley part number 1336EMC2SP31B/B, which is a MAIN CONTROL MODULE. Thank you.

—> Purchase or Repair:
Allen Bradley 1336-b020-eae-l3 showing no display or power. Need immediate repair service, please assist.

—> Purchase or Repair:
#Allen Bradley by Dan Sperry on 2007-10-16 11:27
Sirs , I have a 7360 that keeps shutting off , the 5 volt is at 4.7 to 4.8. Is that enough to cause it to shut down ? How can I adjust the 5 volt to 5.1 as the book says ? Do you repair these or do you have one for sale?

—> Purchase or Repair:
#Allen Bradley by Tom Hamilton on 2025-05-19 01:05
I have observed an Allen Bradley 592-C1FA unit in the warehouse exhibiting abnormal behavior. It is not functioning as expected.

—> Purchase or Repair:
#Allen Bradley by Dawn Pierce on 2017-04-23 08:17
Hey team, the Allen Bradley 1771M1/A stepper controller module went down mid-shift. Need someone to check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Allen Bradley by Leo Orciuoli on 2007-01-26 01:53
I have 6 abb powerflex 70 drives that were damaged because of a voltage surge/spike.1 - 1hp, 1- 3 hp, and 4 - 10hp. Please provide info on repair options.Thank You

—> Purchase or Repair:
#Allen Bradley by Boring on 2016-02-06 11:56
Having issues with my Allen Bradley 1391BAA22/A - AC SERVO CONTROLLER 22AMPS. In need of repair services for industrial unit.

—> Purchase or Repair:
#Allen Bradley by rberson on 2019-07-09 18:50
Hello, I have a client with an Allen Bradley 2097V34P5 Kinetix 300 Servo Drive that needs repair. Could you please provide information on the repair process and cost estimation? Thank you.

—> Purchase or Repair:
#Allen Bradley by McBride on 2025-05-17 19:04
Hey team, one of the drives or boards just failed on the Allen Bradley 1492CABLE007Z. Need to troubleshoot and replace it ASAP to get the machine back up and running. Heading over to the next machine now.

—> Purchase or Repair:
#Allen Bradley by Charles Hall on 2025-05-29 20:20
Hey team, the Allen Bradley 1746-ni4 unit went down mid-shift. Need someone to check and troubleshoot it during the day. Thanks!

—> Purchase or Repair:
#Allen Bradley by Bob Walker on 2019-09-26 22:08
Allen Bradley 150A650NBDA/B controller displaying error code 7E Motor not responding, production halted.

—> Purchase or Repair:
#Allen Bradley by Pryce on 2020-11-07 21:02
Allen Bradley 91013038 PDM 150 IQ5000 DRIVE MODULE is malfunctioning, causing production downtime.

—> Purchase or Repair:
#Allen Bradley by rock on 2024-06-15 16:20
The Allen Bradley 1336-L7E unit is not functioning properly. It has features like Control Interface 1336, Contact Closure, and Encoder Loss Detect. More details may be needed to diagnose the issue accurately.

—> Purchase or Repair:
#Allen Bradley by JASON uEJO on 2022-12-26 20:23
The Allen Bradley PV+1250ColorKT DisplayModule is displaying Error Code 101. Equipment is currently down. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:
#Allen Bradley by Luis Ivan Calderon D on 2020-02-24 18:47
The Allen Bradley 40794-450-01-nnn3 is displaying Error Code 3023.

—> Purchase or Repair:
#Allen Bradley by edward havertong on 2016-12-01 19:23
The Allen Bradley 6181P-15TP2KH operator interface in the shop is not working.

—> Purchase or Repair:
#Allen Bradley by Vlado Mijajlovic on 2012-05-20 00:00
Allen Bradley 1772-lxp-c showing a blank screen upon startup. Need a technician to diagnose and repair

—> Purchase or Repair:
#Allen Bradley by Pakpoom on 2019-02-26 03:59
The Allen Bradley 2711K14C3/A keypad in the warehouse is displaying erratic behavior - not functioning as expected. The unit is acting oddly and may require inspection or troubleshooting to determine the issue.

—> Purchase or Repair:
#Allen Bradley by robert gaudry on 2007-10-21 00:00
Allen Bradley 1746-hsce-a showing no display or response. Need assistance identifying and resolving the issue

—> Purchase or Repair:
#Allen Bradley by Dan Sperry on 2007-10-16 11:20
Sirs , I have a 7360 that keeps shutting off , the 5 volt is at 4.7 to 4.8. Is that enough to cause it to shut down ? How can I adjust the 5 volt to 5.1 as the book says ? Do you repair these or do you have one for sale?

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.