Anilam Service & Repair Forum
Our Anilam Wizard A166-2000000 Digital Readout unit is still down. Please provide an update at your earliest convenience. Thank you.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → Anilam Cursador II ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → cmos memory ↗
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → Anilam 1100 control ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → Anilam error code 18 ↗
- Anilam → anilam error code 18 ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
The Anilam Wizard 350 A1910001 on the Bridgeport Readout just went down drive or board failure. Need immediate attention to resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 digital readout unit is not working as reported.
—> Purchase or Repair:
—> Purchase or Repair:
i have a milling machine with a anilam crusader when i start up the machine he gives a error 18 after 3 seconds and the x as moves 0.5 mm the machine have indramat servos please can you help me
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we seem to have an issue with our Anilam Wizzard A1662000000 digital readout. We require repair info urgently. Can you please provide guidance on how to proceed with this? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Hey there, we're in need of repair information for an Anilam A1920001 controller that stopped working. Can you please provide details on how we can get it fixed as soon as possible? Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Our ANILAM 3000 TOUCH A7334029 controller is still down. Please provide a status update at your earliest convenience.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, the Anilam WIZARD 211 A221300 is displaying error code ER3. Machine is not responding to any inputs. Can you provide assistance ASAP?
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the Anilam Wizard 350 A1920001 Mini Wizard unit is still supported, and if replacement parts or repair options are available for it? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
the ANILAM WIZARD 450 A245300 is down. Issue seems to be with the encoder. Please check it out first thing in the morning. Thanks.
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the Anilam A1920001 controller is still supported or if replacement parts are available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 450 A245200 screen be repaired or replaced? I am trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Anilam Patriot A1480001 digital readout unit is still supported or if replacement parts are available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 111 A1480111 DRO unit in the warehouse is behaving abnormally. The display is flickering and buttons are unresponsive. The measurements are fluctuating and not holding steady like they usually do.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 Digital Readout is malfunctioning, causing a significant slowdown in our production line. Urgently need a repair service to resolve this issue and get production back on track.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 Plus A1920001 is displaying error code E301. Equipment is not responding to commands and appears to be frozen. Please advise on next steps for troubleshooting and repair.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 350 Plus A1920001 Digital Display Module be repaired or bought? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my Anilam Miniwizard A163-2000 display unit. Looking for repair services ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update on the status of the ANILAM 3000 TOUCH A7334029 unit. It is urgent that we get a response this time. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 450 A245200 experienced downtime due to a screen issue. This occurred at resulting in production delays. Can you check on this before the next shift starts? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The display unit on the Anilam Electronics Corp. Wizaed 350+ A1920001 is malfunctioning, causing a halt in production. This issue needs urgent attention to get the line back up and running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
hello, i have a cruasder m controller that has a broken membrane face where you push the program buttons. can you supply a new or good used one?and for what price, thanks Russell
—> Purchase or Repair:
—> Purchase or Repair:
The digital readout on the Anilam Wizzard A1662000000 is malfunctioning, causing production delays. Please send a repair technician urgently to fix the issue and get our line running smoothly again.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we need repair info for our Anilam Patriot A1480001 digital readout, can you provide assistance or recommend a repair shop? Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we have an Anilam Wizard 150 70000291 that has malfunctioned and needs repair. Can you please provide us with the necessary information regarding repair or replacement parts? We need a quick solution. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Miniwizard A163-2000 is displaying error code E05 and is non-operational. Please advise on troubleshooting steps or potential solutions. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi team, the Anilam Wizard 350 Plus A1920001 digital display module is down. Please investigate and troubleshoot during the day shift. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hi, I am inquiring about the ANILAM WIZARD 450 A245300 encoder. I was instructed to get this fixed or replaced but unsure of its function. Could you let me know if it can be repaired or purchased to resolve the issue? Looking to check this off my to-do list. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 450 A245200 issue with the screen; drive or board failure. Scheduled downtime needed for repair.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 controller is displaying error code E102. Equipment has halted production. Please advise on next steps for diagnosis and repair.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 is displaying error code E-214. The display is not responsive and the machine is completely unresponsive. Please advise on necessary steps to troubleshoot and repair. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 controller is displaying unusual behavior in the warehouse. It is not functioning as it normally does. Please investigate the issue
—> Purchase or Repair:
—> Purchase or Repair:
Sir, We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.travels of the machine x,y,z are 710*270*400. Machine has been retrofittedwith Anilam Microprocessor model CRUSADER-2.problem with the machine isthat when machine is switched on, the display on the monitor is showingERROR-18 an…Purchase or Repair: 
...
Show More
Show More
we got a new cnc lathe in our shope with an anilam crusader II control but if we try to jog the axis in manual mode you get an error code 18 we know what the book says about it but we do not know what to do to fix it any help would be greatly appreciatedThanks,David
—> Purchase or Repair:
—> Purchase or Repair:
The XY Axis Controller of the Anilam mini wizard A163-20000 is malfunctioning, impacting production. Need immediate repair service to restore line productivity.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 150 70000291 issue Drive or board failure during rounds. Requires immediate attention.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime with Anilam Patriot A1480001 digital readout unit on . Please provide details on what caused the issue. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam A1920001 controller be repaired or bought? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing an Anilam WIZARD 211 A221300 Digital Readout Module. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
I'm sorry to hear that your Anilam Wizzard A1662000000 digital readout is not functioning properly. I recommend reaching out to our technical support team for further assistance in diagnosing and resolving the issue. They should be able to help troubleshoot the problem and provide a solution. —> …Purchase or Repair: 
...
Show More
Show More
Hi, I work in purchasing and a colleague needs repair info for our Anilam A100-11 tape player. Can you provide details ASAP? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Anilam A1920001 unit went down mid-shift, need troubleshooting and repair. Please follow up during the day. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Daer Sir,We are working on Anilam Since 4 years. We made many mould on it and machine working quality is good. So that is why we purchase one more Anilam 1100 machine from a old machinery ware house. but machine have no software, can you plz send us Anilam 1100`s software ver1.66. we will be very th…Purchase or Repair: 
...
Show More
Show More
Hi,I have a Arnault Samua machine ZXV1 which is fitted with Anilam Crusador 2 controller and Indramat TRM2 DC servo drives. When the machine is switched on , the controller displays ERROR CODE 12. and I am not able to enter anything. It is not accepting any command. I tried pressin Deelte Event butt…Purchase or Repair: 
...
Show More
Show More
Anilam Wizard 350 Plus A1920001 is displaying a blank screen and not responding to any inputs.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: