Anilam Service & Repair Forum

Do you have a replacement Anilam Wizard 211 A221200 Digital Readout Module available for sale? Our unit went down, and we need to get production running smoothly again.

β€”> Purchase or Repair: Ticket Image

β€” Posted by aabtech electronics on 2015-08-09

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Anilam"

If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 397 Comments

#Anilam by SAFAE on 2014-12-17 06:44
The Anilam Wizard A166-2000000 digital readout unit is not working.

β€”> Purchase or Repair:
#Anilam by Scott Redfern on 2007-05-31 14:34
One of the PCB boards in the controller came off it\'s mountings during transport and was damaged. The servos do not power up and the release for Spindle operation is not enabled (even in Spindle manual). Do you need the electrical schematics that I have to make the repair?

β€”> Purchase or Repair:
#Anilam by Rishabh kumar on 2013-08-06 08:32
Do you have Anilam Wizzard A1662000000 digital readouts available for purchase or repair? Our unit is down, and we need to keep production running.

β€”> Purchase or Repair:
#Anilam by Kft. on 2014-12-12 13:16
There was downtime caused by the Anilam Wizard 211 A221200 Display/Control Module. Need quick explanation for next shift.

β€”> Purchase or Repair:
#Anilam by links of london charms on 2014-05-05 13:20
Could you please confirm if the Anilam Patriot A1480001 digital readout unit is still supported or if replacement parts are available? Thank you.

β€”> Purchase or Repair:
#Anilam by Gheorghii on 2014-12-11 03:24
I'm following up again regarding my Anilam Wizard 211 A221200 that is still down. Please provide assistance immediately.

β€”> Purchase or Repair:
#Anilam by anthony d smith on 2014-03-11 11:43
The Anilam Patriot A1480001 digital readout unit is not functioning properly and requires maintenance attention.

β€”> Purchase or Repair:
#Anilam by koekemoer on 2015-07-12 17:32
We experienced downtime due to issues with the Anilam Wizard 211 A221200 digital readout module during the previous shift. Need a quick answer before next shift.

β€”> Purchase or Repair:
#Anilam by Sohail on 2011-12-09 22:55
I need urgent assistance with Anilam Wizard 150 70000291. The unit caused downtime, and I need to report what happened and when it occurred before the next shift arrives. Thank you.

β€”> Purchase or Repair:
#Anilam by pat anderson on 2015-08-13 13:34
Could you please confirm if the Anilam Miniwizard A163-2000 display unit is still supported or if replacement parts are available for it? Thank you.

β€”> Purchase or Repair:
#Anilam by vasquez on 2013-05-25 02:24
Could you please confirm if the Anilam Wizzard A1662000000 is still supported and if replacement parts are available for this digital readout unit?

β€”> Purchase or Repair:
#Anilam by Sah on 2011-02-01 16:36
The Anilam Wizard 150 70000291 just went down, looks like a drive or board failure. Heading over to check it out now.

β€”> Purchase or Repair:
#Anilam by miyasatoo on 2010-01-05 17:45
An issue with the Anilam mini wizard A163-20000 XY Axis Controller is causing delays in production. Please address this urgently to restore operations

β€”> Purchase or Repair:
#Anilam Wizard by MabelGep on 2015-06-26 18:04
The Anilam Wizard 450L A245210 unit screen is not functioning properly.

β€”> Purchase or Repair:
#Anilam Wizard by Pasinello on 2015-07-08 12:32
I am following up regarding my Anilam Wizard 450 A245200 being down. We have not received a reply yet. Please provide assistance

β€”> Purchase or Repair:
#Anilam Wizard by KLYNT SPENCER on 2014-01-18 04:45
Looking for repair on Anilam Wizard 350 Plus A1920002 control unit, not functioning properly. Need assistance in fixing this industrial equipment as soon as possible.

β€”> Purchase or Repair:
#ANILAM by LLC on 2015-07-31 07:20
the ANILAM WIZARD 450 A245300 is down. Issue seems to be with the encoder. Please check it out first thing in the morning. Thanks.

β€”> Purchase or Repair:
#Anilam Wizard by Orvile on 2015-02-27 18:07
Anilam Wizard 111 A1480111 DRO drive/board just failed, needs urgent attention before more machines affected. Heading to next machine, will update shortly.

β€”> Purchase or Repair:
#ANILAM by waqar on 2014-12-23 19:44
Please provide an update on the status of the ANILAM 3000 TOUCH A7334029 unit. It is urgent that we get a response this time. Thank you.

β€”> Purchase or Repair:
#Anilam by bristol on 2015-01-28 03:04
I'm having trouble with the Anilam Miniwizard A163-2000 display unit. It seems like something is not working properly, but I'm not entirely sure what the issue is. Any advice or assistance would be greatly appreciated.

β€”> Purchase or Repair:
#Anilam Wizard by Resende on 2015-08-15 20:20
Screen on Anilam Wizard 450L A245210 is blank and unresponsive.

β€”> Purchase or Repair:
#Anilam by marc snel on 2008-10-19 17:49
i have a milling machine with a anilam crusader when i start up the machine he gives a error 18 after 3 seconds and the x as moves 0.5 mm the machine have indramat servos please can you help me

β€”> Purchase or Repair:
#Anilam by Scanga on 2013-04-09 10:52
We experienced downtime on Unit A1662000000 equipped with an Anilam Wizzard digital readout system. The issue occurred during the night shift on 03/15 at 200 AM. Can you provide insight into what caused the downtime? Appreciate your

β€”> Purchase or Repair:
#Anilam by George Comrie on 2013-07-10 04:32
Can the Anilam Wizzard A1662000000 digital readout be repaired or replaced? I'm looking to check this off my to-do list.

β€”> Purchase or Repair:
#Anilam Electronics Corp. by Ted Fleming on 2015-07-26 20:20
Hello, I am interested in purchasing the Anilam Electronics Corp. Wizard 350+ A1920001 display unit. Can you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

β€”> Purchase or Repair:
#Anilam Wizard by DIEGO SCIUTTO on 2015-08-15 00:20
Experiencing issues with my Anilam Wizard 111 A1480111 DRO unit. Need a technician to diagnose and repair

β€”> Purchase or Repair:
#ANILAM by Gerhard Hein on 2014-02-18 08:12
The ANILAM 3000 TOUCH A7334029 controller unit is not working, please check it.

β€”> Purchase or Repair:
#Anilam by Ranjit Singh on 2012-09-16 17:23
Hi,I have a Arnault Samua machine ZXV1 which is fitted with Anilam Crusador 2 controller and Indramat TRM2 DC servo drives. When the machine is switched on , the controller displays ERROR CODE 12. and I am not able to enter anything. It is not accepting any command. I tried pressin Deelte Event butt…Purchase or Repair: Ticket Image...
Show More
#Anilam by Carlos Zaldivar on 2013-07-18 10:44
Anilam Wizzard A1662000000 unit is down mid-shift. Requires attention before using during the day.

β€”> Purchase or Repair:
#Anilam Wizard by Zehir on 2015-07-12 04:20
Can the Anilam Wizard 111 A1480111 DRO be repaired or bought? I'm trying to check this off my to-do list.

β€”> Purchase or Repair:
#Anilam Wizard by oliver elton letigio on 2015-10-17 03:54
Could you please confirm if the Anilam Wizard 111 A1480111 DRO unit is still supported or if replacement parts are available? Thank you.

β€”> Purchase or Repair:
#Anilam by amar on 2015-08-03 23:20
My Anilam Miniwizard A163-2000 display unit is still not working. I need assistance with this matter. Please respond

β€”> Purchase or Repair:
#Anilam by Monique Haynes on 2011-03-28 06:41
Unit 70000291 on the Anilam Wizard 150 is not functioning properly. Maintenance team needs assistance.

β€”> Purchase or Repair:
#ANILAM by Ing.Jozef on 2014-11-21 16:12
I need assistance with my ANILAM 3000 TOUCH A7334029 controller. It's an older unit, and we're unsure about support or parts availability. Could you please confirm if this model is still supported or if replacement parts are available? Thank you.

β€”> Purchase or Repair:
#Anilam by Alan R Nash on 2012-01-23 19:36
I believe there may be an issue with the Anilam A1920001. It appears that something has stopped working on the controller. I suggest contacting a technician for a closer look to diagnose and resolve the problem effectively.

β€”> Purchase or Repair:
#Anilam by RANJIT SINGH on 2010-09-20 16:16
WE NEED ELECTRICAL CIRCUIT DIAGRAM+REPAIRING MANUAL FOR ANILAM CRUSADER-2(3-AXIS).WHAT WILL BE THE CHARGES FOR THE SAME.

β€”> Purchase or Repair:
#Anilam by Racz on 2014-12-30 14:54
I'm reporting an issue with the Anilam Wizard 350 Plus A1920001, which is the Digital Display Module. The unit malfunctioned and caused downtime earlier today. Can you please provide a quick explanation of what happened and when before the next shift arrives?

β€”> Purchase or Repair:
Could you please confirm if the Anilam Electronics Corp. Wizaed 350+ A1920001 is still supported, and if replacement parts are available for this older model? Thank you.

β€”> Purchase or Repair:
#Anilam by Joe Capone on 2015-07-12 14:32
Hello, I'm interested in purchasing the Anilam Miniwizard A163-2000 Display Unit. I'm unsure about the exact model but was advised to inquire about pricing and availability. Can you provide information as I'm looking to source one quickly? Thank you.

β€”> Purchase or Repair:
#Anilam Electronics by sampaio on 2007-09-16 11:04
The Anilam Electronics Mini Wizard A163-20000 unit is not functioning properly and needs attention from the maintenance team.

β€”> Purchase or Repair:
#Anilam by Abdulkareem on 2014-12-05 01:23
The Anilam Wizard 350 Plus A1920001, a Digital Display Module, experienced downtime during our shift. We urgently need to investigate what went wrong and when it occurred to prevent further disruptions. Can you provide a quick update before the next shift starts?

β€”> Purchase or Repair:
#ANILAM by Scott Skow on 2015-07-13 02:32
I'm having trouble with the ANILAM WIZARD 450 A245300. It's related to the encoder, but I'm not quite sure what the issue is. Would you be able to provide some guidance on how to troubleshoot this problem?

β€”> Purchase or Repair:
I am reaching out on behalf of my client regarding Anilam Electronics Corp. Wizaed 350+ part number A1920001. The issue seems to be related to the Display Unit. Can you please provide more information on the repair process and cost estimation? Thank you.

β€”> Purchase or Repair:
#Anilam Wizard by Tarmizi on 2015-07-07 16:32
Can the Anilam Wizard 450 A245200 screen be repaired or bought? I'm trying to check this off my to-do list.

β€”> Purchase or Repair:
Hi there, could you please provide repair information for Anilam Electronics Corp. Series 1100 31900394 control unit? It stopped working and we need a replacement. Thanks!

β€”> Purchase or Repair:
#ANILAM by RAY GRAJEDA on 2015-01-29 22:32
Hello, I need repair information for an ANILAM WIZARD 450 A245300 encoder. It stopped working and I can't find a replacement. Can you provide me with a solution or direct me to somewhere that can help? Thank you.

β€”> Purchase or Repair:
#Anilam by David Condon on 2015-07-28 10:20
Anilam WIZARD 211 A221300 not displaying any numbers on the digital readout module.

β€”> Purchase or Repair:
#Anilam by Donald Dickert on 2010-10-15 19:40
Hello, I'm reaching out regarding Anilam Wizard 350 A1920001, also known as Mini Wizard, on behalf of a client. They are experiencing some issues with the device and would like to get more information about the possible repairs or troubleshooting steps. Can you please provide guidance on how we can …Purchase or Repair: Ticket Image...
Show More
#Anilam by Cseh on 2015-02-26 16:07
Hi there, we have an issue with our Anilam Miniwizard A163-2000 display unit and need some repair information. Can you please provide us with guidance on how to fix this quickly? Thank you.

β€”> Purchase or Repair:
#Anilam by Nigel Poole on 2012-07-18 09:36
We experienced unexpected downtime due to a malfunction in the Anilam A1920001 controller. It occurred today during the morning shift. Can you provide further insight into the issue before the next shift arrives?

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.