Anilam Service & Repair Forum

The unit 70000291 on the Anilam Wizard 150 is behaving abnormally. It is not performing its typical functions and seems to be acting erratically.

β€”> Purchase or Repair: Ticket Image

β€” Posted by Asad on 2011-01-26

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Anilam"

If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 397 Comments

#Anilam by Sah on 2011-02-01 16:36
The Anilam Wizard 150 70000291 just went down, looks like a drive or board failure. Heading over to check it out now.

β€”> Purchase or Repair:
#Anilam by marc snel on 2008-10-19 17:49
i have a milling machine with a anilam crusader when i start up the machine he gives a error 18 after 3 seconds and the x as moves 0.5 mm the machine have indramat servos please can you help me

β€”> Purchase or Repair:
#Anilam by Queena on 2015-07-27 11:20
Can the Anilam Miniwizard A163-2000 Display Unit be repaired or replaced? Trying to check this off my to-do list.

β€”> Purchase or Repair:
#ANILAM by Michael Landes on 2014-01-03 06:07
Our ANILAM 3000 TOUCH A7334029 controller is still down. Please provide a status update at your earliest convenience.

β€”> Purchase or Repair:
#Anilam by Wonghanchai on 2012-08-02 14:55
Hello, can you please provide us with repair information for an Anilam A1920001 controller? We need a quick response as something has stopped working and we require a replacement. Thank you.

β€”> Purchase or Repair:
#ANILAM by Scott Skow on 2015-07-13 02:32
I'm having trouble with the ANILAM WIZARD 450 A245300. It's related to the encoder, but I'm not quite sure what the issue is. Would you be able to provide some guidance on how to troubleshoot this problem?

β€”> Purchase or Repair:
#Anilam by Ward on 2014-12-23 22:06
Hi there, we need repair info for our Anilam Patriot A1480001 digital readout, can you provide assistance or recommend a repair shop? Thanks!

β€”> Purchase or Repair:
#Anilam by Kft. on 2014-12-12 13:16
There was downtime caused by the Anilam Wizard 211 A221200 Display/Control Module. Need quick explanation for next shift.

β€”> Purchase or Repair:
#Anilam by taipeifu on 2015-07-11 23:20
We experienced unexpected downtime due to a malfunction with the Anilam WIZARD 211 A221300 Digital Readout Module. It occurred during today's shift. Can you provide guidance on how to address this issue before the next shift begins?

β€”> Purchase or Repair:
#Anilam by Pinteric on 2014-12-21 02:44
Hello, I am reaching out on behalf of my client who is experiencing issues with their Anilam Wizard A166-2000000 Digital Readout. Could you please provide more information about the services you offer for this particular model? Thank you.

β€”> Purchase or Repair:
#Anilam by Mohammed Saleh on 2014-12-25 00:44
Hello, I am following up on my previous message regarding the Anilam Patriot A1480001 Digital Readout. The unit is still down and I need assistance. Please ensure someone gets back to me

β€”> Purchase or Repair:
#Anilam by Mortenson on 2014-12-18 04:44
Anilam Wizard 350 Plus A1920001 unit down mid-shift. Display module issue. Needs attention ASAP.

β€”> Purchase or Repair:
#ANILAM by RAY GRAJEDA on 2015-01-29 22:32
Hello, I need repair information for an ANILAM WIZARD 450 A245300 encoder. It stopped working and I can't find a replacement. Can you provide me with a solution or direct me to somewhere that can help? Thank you.

β€”> Purchase or Repair:
#ANILAM by Dyer on 2015-02-28 00:07
The ANILAM WIZARD 450 A245300 in the warehouse is exhibiting unusual behavior. It's not functioning as it normally does, behaving erratically, but I am unsure of the exact issue.

β€”> Purchase or Repair:
#Anilam by Wolfgang Schneider on 2012-12-24 15:24
Could you please confirm if Anilam A1920001 controllers are still supported or if replacement parts are available for this older unit? Thank you!

β€”> Purchase or Repair:
#Anilam by Sangwon Lee on 2011-03-11 10:32
The unit is not operating as it normally does. It is exhibiting unusual behavior that I have not seen before.

β€”> Purchase or Repair:
#ANILAM by Kristensaf on 2015-01-09 00:41
The ANILAM WIZARD 450 A245300 unit is not functioning properly. Description ENCODER.

β€”> Purchase or Repair:
#Anilam by JUDENN A. MONTANER on 2015-01-26 13:45
Hello, I am reaching out on behalf of my client who has an Anilam Wizard 211 A221200 Digital Readout Module that requires repair. Can you please provide details on the services you offer for this particular part? Thank you.

β€”> Purchase or Repair:
#Anilam by xTDZnFsj on 2016-11-06 06:24
The Anilam Wizard 350 A1910001 on the Bridgeport Readout just went down drive or board failure. Need immediate attention to resolve the issue.

β€”> Purchase or Repair:
#Anilam Wizard by Ray mcfadden on 2015-08-01 06:20
Can the Anilam Wizard 450L A245210 screen be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

β€”> Purchase or Repair:
#Anilam Electronics Corp. by tahir on 2014-12-04 13:23
Hi there, I hope this message finds you well. I'm interested in purchasing the Anilam Electronics Corp. Series 1100 31900394 control unit. Could you please provide information regarding pricing and availability? I'm looking to source one quickly. Thank you in advance for your assistance. β€”> …Purchase or Repair: Ticket Image...
Show More
#Anilam by vijayakumar on 2015-07-30 13:20
The Anilam Miniwizard A163-2000 display unit is not functioning. Maintenance team needs assistance.

β€”> Purchase or Repair:
#Anilam Wizard by George Erb on 2014-12-16 18:44
Do you have an Anilam Wizard 350 Plus A1920002 available for repair or sale? Our unit is down, and we need to keep production running.

β€”> Purchase or Repair:
#Anilam by Nigel Poole on 2012-07-18 09:36
We experienced unexpected downtime due to a malfunction in the Anilam A1920001 controller. It occurred today during the morning shift. Can you provide further insight into the issue before the next shift arrives?

β€”> Purchase or Repair:
#Anilam by Carlos Zaldivar on 2013-07-18 10:44
Anilam Wizzard A1662000000 unit is down mid-shift. Requires attention before using during the day.

β€”> Purchase or Repair:
#Anilam by Gary Boomgarden on 2011-11-16 20:43
We have a bridgeport with the 1100 anilam control on it. About a year ago the feed on the x @ y stopped working. Not able to engage the servos. We had a repairman come in who told us that the board that controls the servos is out. Have been waiting for him to have this repaired but has not found any…Purchase or Repair: Ticket Image...
Show More
#Anilam by SAFAE on 2014-12-17 06:44
The Anilam Wizard A166-2000000 digital readout unit is not working.

β€”> Purchase or Repair:
#ANILAM by waqar on 2014-12-23 19:44
Please provide an update on the status of the ANILAM 3000 TOUCH A7334029 unit. It is urgent that we get a response this time. Thank you.

β€”> Purchase or Repair:
#Anilam by GOLLA VANNURU on 2010-08-23 12:38
We're experiencing a critical issue on our Anilam Wizard 111 A1480111 Digital Readout system, affecting our production line. Please prioritize this repair service request to minimize downtime.

β€”> Purchase or Repair:
#Anilam by Sara LaMar on 2015-07-09 02:32
Could you please confirm if the Anilam Wizard 211 A221200 Digital Readout Module is still supported or if replacement parts are available for this older unit? Thank you.

β€”> Purchase or Repair:
#Anilam by piyush on 2012-10-14 04:42
i have anilam 1100 control with bridge port i have change Battery but now i have start machine y axis go to Negative direction and message Y axis lag over.

β€”> Purchase or Repair:
#Anilam by vasquez on 2013-05-25 02:24
Could you please confirm if the Anilam Wizzard A1662000000 is still supported and if replacement parts are available for this digital readout unit?

β€”> Purchase or Repair:
#Anilam by Tong Sheng Holdings Limited on 2014-04-15 00:32
Can the Anilam 1100M A7010000 motor controller be repaired or replaced? I'm trying to check this off my to-do list.

β€”> Purchase or Repair:
#Anilam by Ron Schoenung on 2012-11-30 04:39
Drive or board failure on Anilam A1920001 controller while on rounds, need immediate attention to resolve the issue and minimize downtime.

β€”> Purchase or Repair:
#ANILAM by larry whitaker on 2015-07-08 17:14
My ANILAM WIZARD 450 A245300 encoder unit is malfunctioning, and I need it repaired as soon as possible to avoid any production delays. Seeking assistance from a qualified technician who can quickly diagnose and fix the issue.

β€”> Purchase or Repair:
#Anilam by Mennah Elsayed on 2014-03-30 14:16
Anilam Wizard 350 Plus A1920001 is displaying error code E301. Equipment is not responding to commands and appears to be frozen. Please advise on next steps for troubleshooting and repair.

β€”> Purchase or Repair:
#Anilam Wizard by karan on 2014-08-11 18:05
Can you please confirm if the Anilam Wizard 350 Plus A1920002 control unit is still supported or if there are replacement parts available? Thank you.

β€”> Purchase or Repair:
#Anilam by roy gan on 2015-07-10 16:20
The Anilam Wizard 211 A221200 seems to be a Digital Readout Module that is currently not working. This information was passed along as is.

β€”> Purchase or Repair:
#Anilam by links of london charms on 2014-05-05 13:20
Could you please confirm if the Anilam Patriot A1480001 digital readout unit is still supported or if replacement parts are available? Thank you.

β€”> Purchase or Repair:
#Anilam Wizard by RAUL GUTIERREZ on 2015-01-06 16:41
Anilam Wizard 450 A245200 experienced downtime due to a screen issue. This occurred at resulting in production delays. Can you check on this before the next shift starts? Thank you.

β€”> Purchase or Repair:
#Anilam by vyas on 2011-06-03 01:06
The Anilam Wizard 150 70000291 is displaying error code 'E-###'. Please advise on troubleshooting steps or service needed to resolve the issue

β€”> Purchase or Repair:
#Anilam by TONY KIM on 2015-08-13 04:20
I need assistance with my Anilam WIZARD 211 A221300 Digital Readout Module. The unit is still down. Please follow up and provide a solution

β€”> Purchase or Repair:
#Anilam Wizard by lin wen bin on 2015-02-07 11:52
Hello, the Anilam Wizard 111 A1480111 experienced an issue causing downtime. The incident occurred at 345 PM when the unit stopped functioning properly, leading to a halt in production. Need clarification on the problem. Thank you.

β€”> Purchase or Repair:
#Anilam Electronics Corp. by Jose Sousa on 2014-02-18 00:12
I am interested in purchasing the Anilam Electronics Corp. Series 1100 31900394 Control Unit. Can you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.

β€”> Purchase or Repair:
#Anilam by Loukas on 2015-07-25 10:20
Hello, I'm interested in purchasing the Anilam WIZARD 211 A221300 Digital Readout Module. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

β€”> Purchase or Repair:
#Anilam by Minhas on 2009-10-23 16:43
Mr.Umer Azhar Rana We are in pakistan and we have all of Anilam Cursader II Help tell me in detail what condition of your,s Control You can replay below minhas1986@gmail.com

β€”> Purchase or Repair:
#Anilam by Rupender Rana on 2014-05-05 14:20
There was a downtime incident with the Anilam 1100M A7010000 Motor Controller unit. It occurred on . Need a quick update before the next shift.

β€”> Purchase or Repair:
#Anilam Wizard by Lloyd Bohl on 2015-07-08 02:32
Can the Anilam Wizard 450L A245210 screen be repaired or replaced? I'm trying to get this off my to-do list. Thank you!

β€”> Purchase or Repair:
#Anilam by David Condon on 2015-07-28 10:20
Anilam WIZARD 211 A221300 not displaying any numbers on the digital readout module.

β€”> Purchase or Repair:
#Anilam Wizard by Joe Birdo on 2014-12-16 08:44
Anilam Wizard 350 Plus A1920002 not powering on.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.