Anilam Service & Repair Forum
The Z axis is inoperative, manual movement of the Z axis results in the power contactor tripping out. This is the same contactor that is controlled by the limit switches. When the machine is first powered up the Y,X servo motors are powered, the Z is not getting power.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → anilam error code 18 ↗
- Anilam → Anilam Cursador II ↗
- Anilam → cmos memory ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → Anilam 1100 control ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → Anilam error code 18 ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
The Anilam Wizard 150 70000291 is displaying error code E2. The spindle motor is not running and the machine is unable to start up properly. Please advise on troubleshooting steps. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 seems to be a Digital Readout Module that is currently not working. This information was passed along as is.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my Anilam Wizard 350 A1920001 mini wizard. Need a reliable technician to repair an industrial unit
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Electronics Corp. Series 1100 31900394 Control Unit be repaired or replaced? I'm looking to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM WIZARD 450 A245300 unit labeled as ENCODER is not functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
Sir, We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.travels of the machine x,y,z are 710*270*400. Machine has been retrofittedwith Anilam Microprocessor model CRUSADER-2.problem with the machine isthat when machine is switched on, the display on the monitor is showingERROR-18 an…Purchase or Repair: 
...
Show More
Show More
The Anilam Electronics Corp. Series 1100 31900394 Control Unit experienced a malfunction earlier today, causing downtime from 1000 AM to 1230 PM. Need quick insights before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we are in need of repair information for an Anilam Electronics Corp. Wizaed 350+ A1920001 Display Unit. Something stopped working and we need assistance. Can you please provide us with the necessary repair details? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 450L A245210 screen be repaired or replaced? I'm trying to get this off my to-do list. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Do you have Anilam Wizzard A1662000000 digital readout units available for sale or repair? Need to keep production running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The digital readout on the Anilam Wizzard A1662000000 is malfunctioning, causing production delays. Please send a repair technician urgently to fix the issue and get our line running smoothly again.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 350 A1920001 (mini wizard) unit in the warehouse is not functioning normally. It is exhibiting odd behavior, although I am unsure of the specific issue.
—> Purchase or Repair:
—> Purchase or Repair:
I would recommend reaching out to Anilam customer support directly to inquire about the support and availability of parts for the Anilam Wizard 350 A1920001 mini wizard unit.
—> Purchase or Repair:
—> Purchase or Repair:
Mr.Umer Azhar Rana We are in pakistan and we have all of Anilam Cursader II Help tell me in detail what condition of your,s Control You can replay below minhas1986@gmail.com
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an ANILAM 3000 TOUCH A7334029 controller available for sale or repair?
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 150 70000291 issue Drive or board failure during rounds. Requires immediate attention.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced unexpected downtime due to a malfunction with the Anilam WIZARD 211 A221300 Digital Readout Module. It occurred during today's shift. Can you provide guidance on how to address this issue before the next shift begins?
—> Purchase or Repair:
—> Purchase or Repair:
Please provide information regarding pricing and availability for the Anilam Mini Wizard A163-20000 XY Axis Controller. We are looking to source one
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 Digital Readout unit is exhibiting abnormal behavior in the warehouse. The display is flickering intermittently and not showing accurate readings. Additionally, the buttons seem unresponsive at times. Please investigate this issue
—> Purchase or Repair:
—> Purchase or Repair:
Hey there! We have an ANILAM 3000 TOUCH A7334029 with an issue. Could you provide repair info for this ANILAM Controller as soon as possible? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 unit isn't working. The issue seems to be with the Display/Control Module.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 Digital Readout is malfunctioning, causing a significant slowdown in our production line. Urgently need a repair service to resolve this issue and get production back on track.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A30250 control board is displaying Error Code 115. The machine is currently not responding to any inputs and is producing a continuous alarm sound. Immediate assistance is needed to resolve this issue and get the equipment back up and running.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, could you please provide repair information for Anilam Electronics Corp. Series 1100 31900394 control unit? It stopped working and we need a replacement. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing an issue with the Anilam Wizard 211 A221200, which is a Digital Readout Module. I'm not entirely sure what the problem is, but something seems to have stopped working. I'll try my best to troubleshoot it and find a solution for you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, the Anilam Wizard 111 A1480111 experienced an issue causing downtime. The incident occurred at 345 PM when the unit stopped functioning properly, leading to a halt in production. Need clarification on the problem. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I am sorry to hear that you are experiencing issues with your Anilam 501 901-159 circuit board. Can you please provide more details about the problem you are facing with the unit? Specifically, have you noticed any specific functionality that is not working as expected, such as error codes or malfun…Purchase or Repair: 
...
Show More
Show More
Hello, I'm interested in purchasing the Anilam WIZARD 211 A221300 Digital Readout Module. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 350 Plus A1920001 digital display module is malfunctioning. Please check and repair it to avoid production delays.
—> Purchase or Repair:
—> Purchase or Repair:
Hi,I have a Arnault Samua machine ZXV1 which is fitted with Anilam Crusador 2 controller and Indramat TRM2 DC servo drives. When the machine is switched on , the controller displays ERROR CODE 12. and I am not able to enter anything. It is not accepting any command. I tried pressin Deelte Event butt…Purchase or Repair: 
...
Show More
Show More
Do you have an Anilam WIZARD 211 A221300 Digital Readout Module available for sale or repair? Our production is currently affected, and we are hoping to resolve this issue
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing the Anilam Electronics Corp. Wizard 350+ A1920001 Display Unit. Could you please provide me with information on pricing and availability? I am looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizzard A1662000000 unit is down mid-shift. Requires attention before using during the day.
—> Purchase or Repair:
—> Purchase or Repair:
Our Anilam Wizard 350 Plus A1920001's Digital Display Module is malfunctioning, impacting production line efficiency. Please schedule urgent repair to minimize downtime and resume operations
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 111 A1480111 experienced a malfunction, causing unexpected downtime. This occurred yesterday during the second shift from 600 PM to 1000 PM. Please advise on the next steps to address this issue
—> Purchase or Repair:
—> Purchase or Repair:
The Z axis is inoperative, manual movement of the Z axis results in the power contactor tripping out. This is the same contactor that is controlled by the limit switches. When the machine is first powered up the Y,X servo motors are powered, the Z is not getting power.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 111 A1480111 Digital Readout be repaired or replaced? Trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, the ANILAM WIZARD 450 A245300 experienced downtime due to issues with the encoder yesterday evening around 830 PM. Can you provide some insight into what caused the problem? Your
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Electronics Corp. Series 1100 31900394 Control Unit be repaired or replaced? I'm looking to address this from my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, I need assistance with my Anilam Wizard 350 A1920001, Mini Wizard. There was a unit malfunction that caused significant downtime. Can you provide a brief explanation of what happened and when it occurred? Your
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my Anilam Wizard 111 A1480111 DRO unit. Need a technician to diagnose and repair
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Miniwizard A163-2000 is displaying error code E05 and is non-operational. Please advise on troubleshooting steps or potential solutions. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 digital readout unit is not working as reported.
—> Purchase or Repair:
—> Purchase or Repair:
In need of repair for Anilam A1920001 controller. Unit not powering on. Seeking technician to diagnose and fix
—> Purchase or Repair:
—> Purchase or Repair:
Looking for repair service for Anilam Wizard 111 A1480111 Digital Readout unit. Unit not displaying readings correctly, in need of diagnosis and repair. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
I noticed a unit with the Anilam Wizard 350 Plus A1920001 Digital Display Module is not functioning as it should. The display is showing jumbled characters, and it is not responding to any input.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: