Anilam Service & Repair Forum

The Anilam mini wizard A163-20000 XY Axis Controller is showing Error Code 5 on startup. The machine is not responding to any input commands. Please advise on troubleshooting steps ASAP.

β€”> Purchase or Repair: Ticket Image

β€” Posted by Freddie OurΓΈ Gaardby on 2010-11-16

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Anilam"

If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 397 Comments

#Anilam by piyush on 2012-10-14 04:42
i have anilam 1100 control with bridge port i have change Battery but now i have start machine y axis go to Negative direction and message Y axis lag over.

β€”> Purchase or Repair:
#Anilam Wizard by menelaos on 2015-01-12 17:41
I'm experiencing difficulty with the Anilam Wizard 450L A245210 screen function. It seems to have stopped working properly and I'm not sure why. Could you please assist me in resolving this issue as soon as possible?

β€”> Purchase or Repair:
#Anilam by msureshchander on 2014-04-14 14:32
Our Anilam Wizard A166-2000000 Digital Readout unit is still down. Please provide an update at your earliest convenience. Thank you.

β€”> Purchase or Repair:
#Anilam by Junaidi Ismail on 2013-06-03 22:10
I'm sorry to hear that your Anilam Wizzard A1662000000 digital readout is not functioning properly. I recommend reaching out to our technical support team for further assistance in diagnosing and resolving the issue. They should be able to help troubleshoot the problem and provide a solution. β€”> …Purchase or Repair: Ticket Image...
Show More
#Anilam by Wonghanchai on 2012-08-02 14:55
Hello, can you please provide us with repair information for an Anilam A1920001 controller? We need a quick response as something has stopped working and we require a replacement. Thank you.

β€”> Purchase or Repair:
#Anilam by Kft. on 2014-12-12 13:16
There was downtime caused by the Anilam Wizard 211 A221200 Display/Control Module. Need quick explanation for next shift.

β€”> Purchase or Repair:
#Anilam by anthony d smith on 2014-03-11 11:43
The Anilam Patriot A1480001 digital readout unit is not functioning properly and requires maintenance attention.

β€”> Purchase or Repair:
#Anilam by kenny magerus on 2014-05-06 04:20
The Anilam Patriot A1480001 digital readout unit in the warehouse is exhibiting unusual behavior. It is not functioning as it typically does, although I'm not certain what this electronic device is called.

β€”> Purchase or Repair:
#Anilam by vijayakumar on 2015-07-30 13:20
The Anilam Miniwizard A163-2000 display unit is not functioning. Maintenance team needs assistance.

β€”> Purchase or Repair:
#Anilam by dan mazzola on 2015-02-22 20:47
Experiencing issues with my Anilam Miniwizard A163-2000 display unit. Looking for repair services ASAP.

β€”> Purchase or Repair:
#Anilam Wizard by David L Davis on 2015-07-08 18:14
Can you please confirm if the Anilam Wizard 450L A245210 screen can be repaired or needs to be bought? I'm trying to check this off my to-do list. Thank you.

β€”> Purchase or Repair:
#Anilam by Nigel Poole on 2012-07-18 09:36
We experienced unexpected downtime due to a malfunction in the Anilam A1920001 controller. It occurred today during the morning shift. Can you provide further insight into the issue before the next shift arrives?

β€”> Purchase or Repair:
#Anilam by jay michael deodoro on 2015-07-13 11:20
Experiencing error code "E-102" on Anilam Wizard 211 A221200. Equipment currently down, urgent assistance required to troubleshoot and resolve issue

β€”> Purchase or Repair:
#Anilam by JOLI on 2012-03-09 16:39
Need help with Anilam A1920001 controller not functioning properly, need professional repair. Please respond if experienced in repairing industrial units. Thank you.

β€”> Purchase or Repair:
#ANILAM by Charles E Longielier on 2015-07-13 03:32
The ANILAM WIZARD 450 A245300 unit is described as an encoder and is currently not functioning properly.

β€”> Purchase or Repair:
#Anilam by gary case on 2012-08-24 09:00
Do you have an Anilam A1920001 controller available for sale or repair? Our unit went down and we need to keep production running.

β€”> Purchase or Repair:
#Anilam by Stig on 2013-04-30 18:33
I need repairs for my Anilam Wizzard A1662000000 digital readout unit. It's not displaying any information properly and seems to be malfunctioning. Please let me know if you can help fix it.

β€”> Purchase or Repair:
#Anilam by rodrigo alliende on 2021-04-01 00:00
Hi, I work in purchasing and a colleague needs repair info for our Anilam A100-11 tape player. Can you provide details ASAP? Thank you!

β€”> Purchase or Repair:
#Anilam by Paul Bowers on 2011-03-02 00:55
We're experiencing a critical issue with the Anilam Wizard 150 70000291 that's affecting our production line. Immediate assistance is required to resolve the problem and get operations back up and running swiftly.

β€”> Purchase or Repair:
#Anilam by maite on 2010-01-21 19:49
Can the Anilam Wizard 111 A1480111 Digital Readout be repaired or replaced? Trying to check this off my to-do list.

β€”> Purchase or Repair:
#Anilam by leju on 2013-05-30 18:02
Anilam Wizzard A1662000000 is displaying error code E-345. Machine is not detecting tool changes and prevents operation. Need immediate assistance to troubleshoot and resolve the issue.

β€”> Purchase or Repair:
#Anilam by Daniel Zack on 2014-12-06 09:23
I'm experiencing some issues with the Anilam Patriot A1480001 machine - the digital readout seems to have stopped working. I'm not entirely sure what the model does, but I think it's related to displaying measurements and data. Can you please assist with troubleshooting and fixing this problem? β€”> …Purchase or Repair: Ticket Image...
Show More
#Anilam Electronics Corp. by Jose Sousa on 2014-02-18 00:12
I am interested in purchasing the Anilam Electronics Corp. Series 1100 31900394 Control Unit. Can you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.

β€”> Purchase or Repair:
#Anilam by SIGN AMERICA on 2015-07-11 06:20
Anilam Wizard 211 A221200 digital readout module is malfunctioning, affecting the production line. Urgent repair needed to resume operations

β€”> Purchase or Repair:
#Anilam by Jim Myers on 2015-01-10 18:41
Could you please provide repair information for Anilam Wizard 211 A221200 Digital Readout Module? Our unit has stopped working, and we urgently need a replacement. Thank you for your

β€”> Purchase or Repair:
#Anilam by zafar kibrea on 2014-12-06 02:23
The Anilam Wizard A166-2000000 Digital Readout unit is exhibiting abnormal behavior in the warehouse. The display is flickering intermittently and not showing accurate readings. Additionally, the buttons seem unresponsive at times. Please investigate this issue

β€”> Purchase or Repair:
#ANILAM by Fellous on 2014-12-20 17:44
Drive or board failure on ANILAM 3000 TOUCH A7334029 controller, need immediate attention. Heading to investigate and fix, will update when resolved.

β€”> Purchase or Repair:
#Anilam Electronics Corp. by fidias on 2015-08-07 05:20
Our Anilam Electronics Corp. Wizard 350+ A1920001 is still down. We need a response and resolution now.

β€”> Purchase or Repair:
#Anilam by Sara LaMar on 2015-07-09 02:32
Could you please confirm if the Anilam Wizard 211 A221200 Digital Readout Module is still supported or if replacement parts are available for this older unit? Thank you.

β€”> Purchase or Repair:
#Anilam Wizard by oliver elton letigio on 2015-10-17 03:54
Could you please confirm if the Anilam Wizard 111 A1480111 DRO unit is still supported or if replacement parts are available? Thank you.

β€”> Purchase or Repair:
#Anilam by Joe Capone on 2015-07-12 14:32
Hello, I'm interested in purchasing the Anilam Miniwizard A163-2000 Display Unit. I'm unsure about the exact model but was advised to inquire about pricing and availability. Can you provide information as I'm looking to source one quickly? Thank you.

β€”> Purchase or Repair:
#Anilam by roy gan on 2015-07-10 16:20
The Anilam Wizard 211 A221200 seems to be a Digital Readout Module that is currently not working. This information was passed along as is.

β€”> Purchase or Repair:
#Anilam by Jiri Benesovsky on 2014-12-05 02:23
Hello, I'm reaching out for repair info on an Anilam Wizard A166-2000000 Digital Readout for a colleague. It's not working, and we need a replacement. Can you provide guidance on how to fix it quickly? Thank you.

β€”> Purchase or Repair:
#Anilam by JIM MANSFIELD on 2012-11-30 06:39
The Anilam A1920001 controller is not working.

β€”> Purchase or Repair:
#Anilam by Sangwon Lee on 2011-03-11 10:32
The unit is not operating as it normally does. It is exhibiting unusual behavior that I have not seen before.

β€”> Purchase or Repair:
#Anilam by RANJIT SINGH on 2010-09-20 16:16
WE NEED ELECTRICAL CIRCUIT DIAGRAM+REPAIRING MANUAL FOR ANILAM CRUSADER-2(3-AXIS).WHAT WILL BE THE CHARGES FOR THE SAME.

β€”> Purchase or Repair:
#Anilam by Ward on 2014-12-23 22:06
Hi there, we need repair info for our Anilam Patriot A1480001 digital readout, can you provide assistance or recommend a repair shop? Thanks!

β€”> Purchase or Repair:
#Anilam by Scott Redfern on 2007-05-31 14:34
One of the PCB boards in the controller came off it\'s mountings during transport and was damaged. The servos do not power up and the release for Spindle operation is not enabled (even in Spindle manual). Do you need the electrical schematics that I have to make the repair?

β€”> Purchase or Repair:
#Anilam by Unzeitig LubomΓ­r on 2012-05-06 03:10
The Anilam A1920001 controller is malfunctioning, causing major disruptions to our production line. We need immediate assistance to resolve this issue and get operations running smoothly again. Please prioritize this repair request to minimize any further delays.

β€”> Purchase or Repair:
#Anilam by pat anderson on 2015-08-13 13:34
Could you please confirm if the Anilam Miniwizard A163-2000 display unit is still supported or if replacement parts are available for it? Thank you.

β€”> Purchase or Repair:
#Anilam by Asad on 2011-01-26 23:25
The unit 70000291 on the Anilam Wizard 150 is behaving abnormally. It is not performing its typical functions and seems to be acting erratically.

β€”> Purchase or Repair:
#Anilam by Kallemeyn on 2015-01-08 09:41
Can the Anilam WIZARD 211 A221300 Digital Readout Module be repaired or bought? Need to tick this off my to-do list.

β€”> Purchase or Repair:
#Anilam by JOSE PRADA on 2008-11-26 19:16
We have an Anilam machine that is died.The screen show +x or -x limit. Can you help me?...Thanks..

β€”> Purchase or Repair:
#Anilam by Amado Arcangel Zerendieta on 2014-11-28 20:16
The Anilam 1100M A7010000 motor controller in the warehouse is not functioning as usual. It is displaying abnormal behavior, and I am unsure what the specific issue is.

β€”> Purchase or Repair:
#Anilam by M.HAMADA on 2015-07-28 18:20
I require immediate assistance with my Anilam Wizard 211 A221200 Digital Readout Module. The unit is still down. Please respond

β€”> Purchase or Repair:
#ANILAM by Zac on 2015-02-02 13:39
Hi, I am inquiring about the ANILAM WIZARD 450 A245300 encoder. I was instructed to get this fixed or replaced but unsure of its function. Could you let me know if it can be repaired or purchased to resolve the issue? Looking to check this off my to-do list. Thank you.

β€”> Purchase or Repair:
#Anilam by Jr. on 2012-03-29 18:18
I can help with that. I will write a message inquiring about the support and availability of parts for the Anilam A1920001 controller.

β€”> Purchase or Repair:
#Anilam by Sam Teague on 2012-02-24 02:21
Our Anilam A1920001 controller is still down. Please prioritize a response this time.

β€”> Purchase or Repair:
#Anilam by Saint Simon on 2010-02-17 10:24
Our Anilam Wizard 350 A1920001, mini wizard, is still out of operation. Kindly ensure a

β€”> Purchase or Repair:
Can the Anilam Electronics Corp. Series 1100 31900394 Control Unit be repaired or replaced? I'm looking to check this off my to-do list.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.