Troubleshooting Atlas Copco: Common problems and repair info

Atlas Copco for Service call 1-336-969-0110 at Industrial Electronics Repair

Atlas Copco Service & Repair Forum

hello, our atlas copco G15 installed in Tebisti oil field does not start, there was the temperature lamp on but I fixed this problem, I connected the temperature sensor a jumper but though it does not start, and there was the oil level lamp on too but it is gone now, this atlas copco driving me crazy, it just does not want to start, and I found no electrical drawing or any thing because of the war, everything is gone, any estimates how can I solve this problem, or any drawings you can send me maybe, I appreciate your help.Abdo from Libya

—> Purchase or Repair:

— Posted by Abdussamad on 2012-03-15

Reply🗨️Ask a New Question Below❓

Recent 1316 Comments

#Atlas Copco by Akers on 2013-07-06 06:09

Can the Atlas Copco GA45 1900.0590.74 controller be repaired or replaced? Trying to check this off my to-do list.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Gabriel Gonzalez Ramirez on 2012-01-23 17:36

Hello, I am inquiring about an Atlas Copco controller with the part number 1900-0700-08 that needs repair. Can you provide information on the services and costs involved? Thank you.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by mohammed gomaa on 2015-09-17 21:31

it is good commpressor

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Gianni on 2008-02-22 13:45

Very likely send temperature sensor failure

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Tejas on 2011-07-13 02:02

I am facinga problem since last many days about wiring details in my instrument laboratory.So,please arrange to send me a complete manual for our maintenance purose of view.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Bing Lopez on 2011-07-27 01:22

GA 75 Electronikon II controller module presently instlled was bug down and the parameters of the compressor can not be seen at the display monitor

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by mohamed lakhal on 2011-03-15 14:12

i want the manuel afficheur electronicon

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Roseann on 2015-03-09 08:13

The Atlas Copco Elektronikon II 1900071012 compressor controller is malfunctioning, causing a halt in production. The issue needs urgent attention from the repair service to restore operations

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by PRABHAKAR on 2010-07-09 18:58

Hello, I am interested in purchasing the Atlas Copco GA55/125 1900.0590.74 controller. Could you please provide me with information on pricing and availability? We are looking to source this unit quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by DIMITRIS ZAOURIS on 2008-05-08 09:05

Dear sirWe are a food industry in Greece and we have two ATLAS COPCO GA115air compressors and i have a problem with the keyboard of the one unit.The electronikon screen works but when i want to change parameters the push buttons not work.I think that i need only the front keyboard.Can you provide th…Purchase or Repair:

➡️ Reply

#Atlas Copco by kamal on 2009-01-17 08:07

we have one compressor model gx7. we want part list & manual for above compressor

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Gajanan Ambekar on 2011-10-25 09:21

Kindly provode us the autorise dealer for our requirment of Regulator 1900 0710 12 for ATLAS COPCO GA 55 COMPRESSORPlease forward us technical details , working for this regulator.Thanks & regards,Gajanan P. AmbekarExecutive – MBD MaterialsMukand LtdThane – Belapur Road,Dighe, Thane India 400605Tel …Purchase or Repair:

➡️ Reply

#Atlas Copco by jonas hofer on 2013-07-14 06:57

Can the Atlas Copco Elektronikon 1900070008 be repaired or replaced? Trying to check this off my to-do list.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by joe reese on 2012-11-26 12:18

Hi ,We have a atlas copco type GA7FF Product# 8153005742Ser#CAI 707465 the manual we currently have does not have correct display listed for troubleshooting. hope you can help Thanks Joe NCI Frederick MD

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by tasman on 2011-06-26 03:50

atlas copco is the best quality

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by amit kumar airan on 2012-11-19 02:59

The controller unit on the Atlas Copco Elecktronikon 1900-0590-12 is malfunctioning, impacting our production line. Urgent action is required to resolve the issue and minimize downtime.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Tuan Phan on 2011-01-17 23:44

Hello,I have a Atlas Copco SF15 compressor, the display show 100400000000when power up and nothing else is funtion. what wrong with the controller or machine? Thanks,

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by GANESH on 2009-06-06 12:45

dear sir, i have elektronikon II unit but some problem is inside i want some information ragarding cirquit digram or IC Details used in unit i hope u will give me response kindly.. Thanks ganesh

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by naden venkatasami on 2009-12-21 12:11

I have an atlas copco compressor GA75 when switch on power it appears on the display 100300000000 and cannot start the compressor and also no touch switch are working .Please advice urgently

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by albertoli fernando on 2009-09-22 14:15

handbook equipment

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by JITENDRA on 2009-11-27 06:44

WE REQUIRE MANUAL FOR G-11 AIR SCREW COMPRESSOR AND ELECTRONIC CONTROL PANEL LATEST VERTION. THIS HAS BEEN FITTED IN OUR NITROGEN PSA SYSTEM.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by P. Neto on 2010-08-07 23:21

very good

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Jomby on 2012-01-30 20:37

Hi Sir,I would like to know the cost to repair MLVA for MP 1600..I will appreciate your soonest reply.Thank You.Aime Jomby

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by carlson on 2014-11-27 00:14

The Atlas Copco Elektronikon II 1900071011 is not operational. Can you please help look into this issue?

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by satish on 2009-07-27 16:03

we are using 12 numbers of screw compressor from yours. it good in service we need the above document

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by udaya on 2011-04-05 02:38

Dear Sir,Please send me Elektronikon controller manual.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Hamdi Ayussa on 2008-10-09 07:54

Dear Sir,Can you help me ? I need the instruction for elektronikon cause I get some problem for start my comperessor. The type of my compressor is GA 160.Trims for your attentionBest RegardsHamdi

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Florin on 2013-07-24 00:32

Hello, we are still waiting for assistance with our Atlas Copco Elektronikon 1900 0701 05 controller. Please respond urgently to resolve the issue.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Engr. Muzaffar on 2020-09-26 07:52

Error code 7301 System failure GA90VSD with 7301 defaultPlease suggest solution of this error as soon as possible.Thank you.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Engr. Solomon Ogagavwodia on 2011-08-04 16:58

electric wiring tampered with

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Daniel Clifton on 2009-09-15 16:45

excellent company

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Reinaldo on 2010-01-26 18:05

I would like to receive docomention about Atlas Copo GA55

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Satish Rane on 2009-09-03 05:58

I wanted to activate auto restarting for Atlas Copco after power resumption.To do this I required the above mentioned Manual

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by FCO. VILLELA on 2008-01-30 21:41

Hi,i have some problems whit the mastercontrol elektronikon i want to say if you can to send my the users manual

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by LODI on 2012-01-28 18:12

We experienced unexpected downtime on the unit controlled by the Atlas Copco Elecktronikon 1900-0590-12. It happened during the 1st shift today. Please advise on the issue as the next shift is approaching.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by lahcene meskine on 2013-02-28 12:50

Dear Sirs,I need technical manual(s) of Elektronikon P/N:1900070122 or 1900070125.Thanks for your attention

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by David Downes on 2011-09-08 14:28

Electronikon shows converter failure 001.Siemans drive shows F0001. I was told that is motor failure.Test motor w/ 500 volt megemeter. showed no leakage to ground.Tested w/ ajustable AC Volt induction meter, trips @ 1700 volts / 10 meg ohms also trips trips @ 500 volt / 3 meg ohmsPulled fan cover, m…Purchase or Repair:

➡️ Reply

#Atlas Copco by Manuel Veliz on 2008-11-07 03:24

ineed help about of comunication between elektronikon and SST CLX PB

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by MAZOUARI on 2012-04-19 13:03

Bonjour;merci bien de m\'envoyer la documentation technique relatif au régulteur Electronikon PN:1900070125

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Alcantara on 2012-02-18 12:17

I'm experiencing some issues with the Atlas Copco 1900-0700-08 controller, as something seems to have stopped working properly. I'm not entirely sure what the model does, but I would appreciate some assistance in resolving this issue. Thank you.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Behzad Akbari on 2008-10-05 12:44

Hi,I\'ve lost the Elektronikon Atlas Copco manual.

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by NAOUFAL LAHBALAT on 2022-03-13 13:37

manuel atlas copco GA55+ elektronikon II

—> Purchase or Repair:

➡️ Reply

#Atlas Copco by Omar THIAM on 2009-05-20 14:23

Bonjournous avons deux compresseur Atlas COPCO ZT45 et ZT22 dans notre usine de production de boisson Coca Cola. je suis le Utilities Manager et depuis mon arrivée j\'ai aucune documentation sur le module de commande Elektronikon et le manuel de maintenance.merci de nous envoyer en PDF si possible c…Purchase or Repair: