Atlas-Copco Service & Repair Forum

I noticed that the Atlas-Copco Elecktronikon 1900-0700-08 unit in the warehouse is behaving unusually. It is displaying erratic behavior and not functioning as it normally does.

—> Purchase or Repair: Ticket Image

— Posted by vikas borana on 2012-03-20

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Atlas-Copco"

If you need your Atlas-Copco unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 100 Comments

#Atlas-Copco by Grégoire TRIQUENOT on 2012-02-10 03:35
The Atlas-Copco Elecktronikon 1900-0700-08 is not functioning properly. Please investigate and troubleshoot the issue. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Penny Harnish on 2012-09-21 17:47
Can you please confirm if the Atlas-Copco Electronikon 1900-0700-08 controller is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Shirley Lane on 2012-06-06 04:03
The Atlas-Copco Elecktronikon 1900-0700-08 in Unit X malfunctioned during the mid-shift. Need someone to look into it ASAP.

—> Purchase or Repair:
#Atlas-Copco by Mr ROHAUT on 2012-05-09 20:40
Hello, we need repair information for an Atlas-Copco Elecktronikon 1900-0700-08 controller. Can you please provide assistance? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Evgeniy on 2012-08-21 19:46
Could you please provide repair information for an Atlas-Copco Elecktronikon 1900-0700-08 controller? It stopped working, and we are looking for a replacement. Thanks!

—> Purchase or Repair:
#Atlas-Copco by JTFKPybekZ on 2012-07-05 15:40
Can you please provide information on the availability of support or replacement parts for the Atlas-Copco Elecktronikon 1900-0700-08 controller? It is an older unit, and our team is unsure about its manufacturer.

—> Purchase or Repair:
#Atlas-Copco by XRumerTest on 2011-07-04 17:52
Our Atlas-Copco Elecktronikon 1900.0590.74 Control Unit is still down. We need immediate assistance. Please get back to us as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Engineer Ziad Al Sakka on 2012-02-10 02:35
Do you have an Atlas-Copco Electronikon 1900-0700-08 controller available for sale or repair? We need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#Atlas-Copco by PATRUT RAUL on 2011-03-15 18:01
The maintenance team reported an issue with the Atlas-Copco Elecktronikon 1900.0590.74 unit. They mentioned it's a Control Unit that is not functioning properly.

—> Purchase or Repair:
#Atlas-Copco by Telecasterkds on 2012-01-17 21:18
Could you please provide information on whether the Atlas-Copco Electronikon 1900-0700-08 controller is still supported or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Wanchai on 2012-12-20 01:48
Do you have an Atlas-Copco Elecktronikon 1900-0700-08 available for sale or repair? Our unit has gone down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Maharajan on 2012-06-06 19:48
The Atlas-Copco Elecktronikon 1900-0700-08 controller unit in the shop is not working.

—> Purchase or Repair:
#Atlas-Copco by Douglas Lefeve on 2012-09-30 18:57
Could you please confirm if the Atlas-Copco Elecktronikon 1900-0700-08 controller is still supported, and if replacement parts are available? We are looking for repair options for this older unit but are unsure of the manufacturer. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Emily Gladden on 2012-03-25 02:08
The Atlas-Copco Electronikon 1900-0700-08 controller is not working.

—> Purchase or Repair:
#Atlas-Copco by Sirkin on 2012-09-23 06:08
The Atlas-Copco Elecktronikon controller unit is not working.

—> Purchase or Repair:
#Atlas-Copco by Adrian Younger on 2012-04-22 16:24
Our Atlas-Copco Elecktronikon 1900-0700-08 unit is still down. We need urgent assistance. Please provide support as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Plimmer on 2012-08-05 01:24
The Electronikon 1900-0700-08 controller on Machine 5 just went down, likely a drive or board failure. I've alerted the maintenance team for immediate action.

—> Purchase or Repair:
#Atlas-Copco by KOMAX on 2012-02-17 09:52
The Atlas-Copco Electronikon 1900-0700-08 controller malfunctioned during the night shift. Needs attention ASAP.

—> Purchase or Repair:
#Atlas-Copco by Gumersindo Alvero on 2012-06-14 09:31
Hello, I'm reaching out regarding an Atlas-Copco Elecktronikon 1900-0700-08 Controller that needs repair or replacement. Could you please provide repair info or suggestions for a replacement part? Your

—> Purchase or Repair:
#Atlas-Copco by Beddard on 2012-09-27 01:36
Hi, I'm looking to either repair or purchase a replacement Atlas-Copco Electronikon 1900-0700-08 controller. Could you please let me know if it can be fixed or if I need to buy a new one? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Atlas-Copco by Gregory Luchey on 2012-08-17 03:19
The Atlas-Copco Elecktronikon 1900-0700-08 unit isn't working properly.

—> Purchase or Repair:
#Atlas-Copco by schepers didier on 2012-02-22 02:22
Hello, I'm reaching out on behalf of our client who is experiencing some issues with an Atlas-Copco Elecktronikon 1900-0700-08 Controller. Could you please provide us with information on resolving this problem? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Damaris on 2012-01-19 11:47
Hello, I'm reaching out on behalf of a client with an issue related to the Atlas-Copco Elecktronikon 1900-0700-08 Controller. Can you please provide information on how to troubleshoot and possibly repair this part? Thank you!

—> Purchase or Repair:
#Atlas-Copco by Abd Aziz Sahat on 2012-01-22 07:23
My Atlas-Copco Elecktronikon 1900-0700-08 controller is not powering on, and we urgently need it fixed to resume operations. Looking for a reliable technician who can quickly address and repair this industrial unit issue.

—> Purchase or Repair:
#Atlas-Copco by benny hewitt on 2012-08-15 23:11
We experienced downtime due to an issue with the Atlas-Copco Elecktronikon 1900-0700-08 controller. Can you look into this and provide feedback before the next shift starts?

—> Purchase or Repair:
#Atlas-Copco by Michael Matheny on 2012-07-24 14:55
I need repair info for Atlas-Copco Elecktronikon 1900-0700-08 controller. Urgent replacement needed but can't find one. Please advise.

—> Purchase or Repair:
#Atlas-Copco by Ahmed Elshreef on 2012-01-07 14:11
The Atlas-Copco Elecktronikon 1900-0700-08 is not working. Please look into it.

—> Purchase or Repair:
#Atlas-Copco by Thulani on 2012-12-06 03:32
Experiencing issues with my Atlas-Copco Electronikon 1900-0700-08 controller unit. Need technical assistance for repair. Please reach out if you can provide support.

—> Purchase or Repair:
#Atlas-Copco by Fanie on 2012-05-12 21:21
I am experiencing some issues with the Atlas-Copco Elektronikon 1900-0700-08 controller. It seems like something has stopped working properly. I'm not sure about the specifics, but any assistance would be greatly appreciated.

—> Purchase or Repair:
#Atlas-Copco by Don Radford on 2012-09-12 16:44
One of the drives or boards on the Atlas-Copco Electronikon 1900-0700-08 controller just failed. It needs immediate attention to avoid any downtime on the machines.

—> Purchase or Repair:
#Atlas-Copco by Greg Klein on 2012-06-06 18:48
The Atlas-Copco Electronikon 1900-0700-08 is displaying error code 345. Machine is not responding to inputs and not completing cycles. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:
#Atlas-Copco by Dan Regan on 2012-02-16 10:52
Experiencing issues with my Atlas-Copco Electronikon 1900-0700-08 controller, need repairs urgently. Unit not powering on despite multiple attempts. Thank you.

—> Purchase or Repair:
#Atlas-Copco by dinh cong nguyen on 2012-11-12 07:40
Received alert on Elektronikon 1900-0700-08 controller - drive/board failure. Heading your way to inspect. Stand by.

—> Purchase or Repair:
#Atlas-Copco by Carl carver on 2012-01-16 13:07
The Atlas-Copco Elecktronikon 1900-0700-08 controller is displaying error code E123. Equipment is not starting up as normal, and the screen remains unresponsive. Please advise on troubleshooting steps or possible solutions. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Ted Bueschel on 2011-12-28 20:30
The Atlas-Copco Elecktronikon 1900.0590.74 is a Control Unit that is not working correctly. That's the information I have at the moment.

—> Purchase or Repair:
#Atlas-Copco by mario cardona on 2012-11-24 03:19
Atlas-Copco Electronikon 1900-0700-08 not responding to controls.

—> Purchase or Repair:
#Atlas-Copco by igarashi on 2012-01-01 16:53
Hello, I am inquiring about the Atlas-Copco Elecktronikon 1900-0700-08 controller for my client. They are experiencing issues with it and would like more information on repair options. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Joseph Cooney on 2017-09-22 00:00
Hi there, our Atlas-Copco 1900-0700-08 Control Display stopped working, and we need a replacement. Can you please provide repair info urgently? Thanks!

—> Purchase or Repair:
#Atlas-Copco by Roman Soroka on 2012-05-15 19:43
The Atlas-Copco Elecktronikon 1900-0700-08 isn't working. The maintenance team needs to check this Controller unit.

—> Purchase or Repair:
#Atlas-Copco by Bethune on 2011-02-05 13:12
My Atlas-Copco Elecktronikon 1900.0590.74 Control Unit is displaying error codes and not responding to commands. Looking for a technician to troubleshoot and repair

—> Purchase or Repair:
#Atlas-Copco by Kevin Chen on 2012-03-12 09:55
Hello, I'm interested in purchasing an Atlas-Copco Electronikon 1900-0700-08 Controller. I wanted to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Caufman on 2012-03-01 23:14
Our Atlas-Copco Elecktronikon 1900-0700-08 controller is still down. We need immediate assistance. Kindly provide support as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Demetrio Frangakis on 2012-06-05 21:19
I am interested in purchasing an Atlas-Copco Electronikon 1900-0700-08 controller. Could you please provide information on pricing and availability? My team suggested reaching out to you, as we are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Betta Wu on 2012-07-25 11:10
Machine displaying error code 1043.

—> Purchase or Repair:
#Atlas-Copco by Manny Meraz on 2012-01-14 08:06
There was a downtime caused by the malfunction of the Atlas-Copco Elecktronikon 1900-0700-08 controller. This occurred earlier today during the morning shift. Your

—> Purchase or Repair:
#Atlas-Copco by Lacouture on 2012-04-20 16:05
I'm experiencing an issue with the Atlas-Copco Elecktronikon 1900-0700-08 controller. The machine has stopped working properly, and I'm not sure what the exact problem is. I would appreciate assistance in diagnosing and fixing the issue.

—> Purchase or Repair:
#Atlas-Copco by RICHARD L. TITUS on 2012-05-15 02:21
Could you please confirm if the Atlas-Copco Electronikon 1900-0700-08 controller is still supported? We are looking to locate a replacement or repair option for this unit, which is quite old, and we are unsure of the manufacturer. Kindly advise if parts are still available. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Atlas-Copco by muftah elsahly on 2012-09-26 23:36
The Atlas-Copco Elecktronikon 1900-0700-08 unit is down. Need daytime crew to follow up.

—> Purchase or Repair:
#Atlas-Copco by Ahmad Niazi on 2012-10-19 14:43
The Atlas-Copco Electronikon 1900-0700-08 controller on machine 5 just went down. Need to troubleshoot ASAP to get it back up and running.

—> Purchase or Repair:
#Atlas-Copco by david walmsley on 2012-08-03 22:24
Do you have an Atlas-Copco Electronikon 1900-0700-08 available for sale or repair? Our production is down, and we need a replacement ASAP.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.