Atlas-Copco Service & Repair Forum

We experienced downtime due to an issue with the Atlas-Copco Elecktronikon 1900-0700-08 controller. Can you look into this and provide feedback before the next shift starts?

—> Purchase or Repair: Ticket Image

— Posted by benny hewitt on 2012-08-15

Reply🗨️Ask a New Question Below❓

If you need your Atlas-Copco unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 100 Comments

#Atlas-Copco by Figeac on 2011-06-25 08:12
Please provide an update on the status of the Atlas-Copco Elecktronikon 1900.0590.74 Control Unit. It is still not functioning, and immediate attention is needed to resolve this issue

—> Purchase or Repair:
#Atlas-Copco by Adrian Younger on 2012-04-22 16:24
Our Atlas-Copco Elecktronikon 1900-0700-08 unit is still down. We need urgent assistance. Please provide support as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by soni on 2012-12-03 18:43
Could you please confirm if the Atlas-Copco Elecktronikon 1900-0700-08 controller is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Atlas-Copco by AGBOOLA on 2012-07-18 08:36
Could you please provide information on pricing and availability for the Atlas-Copco Elecktronikon 1900-0700-08 controller? I am interested in purchasing one urgently. Thank you.

—> Purchase or Repair:
#Atlas-Copco by RICHARD L. TITUS on 2012-05-15 02:21
Could you please confirm if the Atlas-Copco Electronikon 1900-0700-08 controller is still supported? We are looking to locate a replacement or repair option for this unit, which is quite old, and we are unsure of the manufacturer. Kindly advise if parts are still available. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Atlas-Copco by can gezer on 2012-04-23 20:21
Hello, I need repair information for an Atlas-Copco Elecktronikon 1900-0700-08 controller. It stopped working and we need a replacement. Can you provide details? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Beddard on 2012-09-27 01:36
Hi, I'm looking to either repair or purchase a replacement Atlas-Copco Electronikon 1900-0700-08 controller. Could you please let me know if it can be fixed or if I need to buy a new one? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Atlas-Copco by Steven on 2012-02-18 10:17
The Atlas-Copco Electronikon 1900-0700-08 controller just failed, need to troubleshoot and replace the faulty drive or board ASAP.

—> Purchase or Repair:
#Atlas-Copco by ALEXANDER GONZALEZ on 2011-03-11 05:32
We experienced downtime due to an issue with the Atlas-Copco Elecktronikon 1900.0590.74 Control Unit. This occurred today during your shift. Can you provide any insight or solutions before the next shift arrives?

—> Purchase or Repair:
#Atlas-Copco by vikas borana on 2012-03-20 21:44
I noticed that the Atlas-Copco Elecktronikon 1900-0700-08 unit in the warehouse is behaving unusually. It is displaying erratic behavior and not functioning as it normally does.

—> Purchase or Repair:
#Atlas-Copco by Mike Hursh on 2012-08-02 03:55
The Atlas-Copco Elecktronikon 1900-0700-08 controller in the warehouse is behaving strangely. It's not operating as usual and seems to be malfunctioning.

—> Purchase or Repair:
#Atlas-Copco by shathi on 2012-03-13 19:26
Hello, the Atlas-Copco Electronikon 1900-0700-08 is displaying error code E0074. The equipment is currently down, and we are unable to proceed with operations. Please advise on the next steps to resolve this issue

—> Purchase or Repair:
#Atlas-Copco by Babaran on 2012-09-10 05:04
I'm having trouble with my Atlas-Copco Elecktronikon 1900-0700-08 controller. It seems like something has stopped working, but I'm not quite sure what it does specifically. Any help or guidance would be greatly appreciated.

—> Purchase or Repair:
#Atlas-Copco by Odilia Korenek on 2011-05-07 12:36
Atlas-Copco Elecktronikon 1900.0590.74 Control Unit displaying error code "SAFETY STOP".

—> Purchase or Repair:
#Atlas-Copco by Ariel on 2012-08-14 22:46
Hi there! Just checking in to see if the Atlas-Copco Elecktronikon 1900-0700-08 controller can be repaired or if a replacement can be bought. Trying to get this sorted out as part of my to-do list. Let me know, thank you!

—> Purchase or Repair:
#Atlas-Copco by Maharajan on 2012-06-06 19:48
The Atlas-Copco Elecktronikon 1900-0700-08 controller unit in the shop is not working.

—> Purchase or Repair:
#Atlas-Copco by Kevin Chen on 2012-03-12 09:55
Hello, I'm interested in purchasing an Atlas-Copco Electronikon 1900-0700-08 Controller. I wanted to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Haznira Ismail on 2012-01-16 22:27
Hello, I am reaching out on behalf of a client who is experiencing issues with an Atlas-Copco Elecktronikon 1900-0700-08 Controller. Can you please provide details on troubleshooting or repair services available for this part? Thank you.

—> Purchase or Repair:
#Atlas-Copco by martin zarate on 2012-02-02 22:52
Hi there, we have an issue with our Atlas-Copco Elecktronikon 1900-0700-08 Controller. We need to find a replacement but are having trouble locating one. Can you please provide repair information? Thank you!

—> Purchase or Repair:
#Atlas-Copco by Cezaretti on 2012-06-30 12:05
The Atlas-Copco Electronikon 1900-0700-08 controller unit is not working and needs attention from the maintenance team.

—> Purchase or Repair:
#Atlas-Copco by Ika on 2011-05-17 08:30
The Atlas-Copco Elecktronikon 1900.0590.74 control unit is displaying error code E001 on screen. Equipment is not operating, showing a red alarm light. Need urgent repair support to resolve issue.

—> Purchase or Repair:
#Atlas-Copco by neal gant on 2012-06-14 04:48
Do you have an Atlas-Copco Electronikon 1900-0700-08 available for sale or repair?

—> Purchase or Repair:
#Atlas-Copco by Lacouture on 2012-04-20 16:05
I'm experiencing an issue with the Atlas-Copco Elecktronikon 1900-0700-08 controller. The machine has stopped working properly, and I'm not sure what the exact problem is. I would appreciate assistance in diagnosing and fixing the issue.

—> Purchase or Repair:
#Atlas-Copco by Greg Rietman on 2012-05-18 07:35
The Atlas-Copco Electronikon 1900-0700-08 controller is not working.

—> Purchase or Repair:
#Atlas-Copco by Demetrio Frangakis on 2012-06-05 21:19
I am interested in purchasing an Atlas-Copco Electronikon 1900-0700-08 controller. Could you please provide information on pricing and availability? My team suggested reaching out to you, as we are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Fanie on 2012-05-12 21:21
I am experiencing some issues with the Atlas-Copco Elektronikon 1900-0700-08 controller. It seems like something has stopped working properly. I'm not sure about the specifics, but any assistance would be greatly appreciated.

—> Purchase or Repair:
#Atlas-Copco by Emily Gladden on 2012-03-25 02:08
The Atlas-Copco Electronikon 1900-0700-08 controller is not working.

—> Purchase or Repair:
#Atlas-Copco by XRumerTest on 2011-07-04 17:52
Our Atlas-Copco Elecktronikon 1900.0590.74 Control Unit is still down. We need immediate assistance. Please get back to us as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Ted Bueschel on 2011-12-28 20:30
The Atlas-Copco Elecktronikon 1900.0590.74 is a Control Unit that is not working correctly. That's the information I have at the moment.

—> Purchase or Repair:
#Atlas-Copco by Plimmer on 2012-08-05 01:24
The Electronikon 1900-0700-08 controller on Machine 5 just went down, likely a drive or board failure. I've alerted the maintenance team for immediate action.

—> Purchase or Repair:
#Atlas-Copco by Engineer Ziad Al Sakka on 2012-02-10 02:35
Do you have an Atlas-Copco Electronikon 1900-0700-08 controller available for sale or repair? We need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Markunas on 2012-04-27 20:08
Hello, I'm interested in purchasing an Atlas-Copco Electronikon 1900-0700-08 controller. I'm not completely sure if this is the right model, but my team recommended reaching out for more information. Could you please provide me with pricing and availability? I'm looking to source one quickly. Thank …Purchase or Repair: Ticket Image...
Show More
#Atlas-Copco by Merriman on 2012-06-27 04:09
Do you have an Atlas-Copco Elecktronikon 1900-0700-08 controller available for sale or repair? Need to keep production running.

—> Purchase or Repair:
#Atlas-Copco by Leo McCarthy on 2012-12-22 01:40
I have observed unusual behavior from an Atlas-Copco Electronikon 1900-0700-08 unit in the warehouse.

—> Purchase or Repair:
#Atlas-Copco by David J Langley on 2012-06-11 12:33
I can help with that. I'll reach out to inquire about repairing or purchasing a replacement for your Atlas-Copco Elecktronikon 1900-0700-08 controller. I'll keep you posted as I work on checking this off your to-do list.

—> Purchase or Repair:
#Atlas-Copco by Michael Matheny on 2012-07-24 14:55
I need repair info for Atlas-Copco Elecktronikon 1900-0700-08 controller. Urgent replacement needed but can't find one. Please advise.

—> Purchase or Repair:
#Atlas-Copco by varenhorst on 2012-05-15 17:43
The Atlas-Copco Electronikon 1900-0700-08 controller unit went down mid-shift. Please review and address the issue during the day shift. Thank you!

—> Purchase or Repair:
#Atlas-Copco by Telecasterkds on 2012-01-17 21:18
Could you please provide information on whether the Atlas-Copco Electronikon 1900-0700-08 controller is still supported or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Bethune on 2011-02-05 13:12
My Atlas-Copco Elecktronikon 1900.0590.74 Control Unit is displaying error codes and not responding to commands. Looking for a technician to troubleshoot and repair

—> Purchase or Repair:
#Atlas-Copco by jarvis on 2012-10-15 06:58
The Atlas-Copco Elecktronikon 1900-0700-08 controller is displaying an error saying "Communication Failure".

—> Purchase or Repair:
#Atlas-Copco by Tammy Sehm on 2012-04-12 04:57
The Atlas-Copco Electronikon 1900-0700-08 is displaying error code 1234. Equipment is not running; suspect issue with the controller. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#Atlas-Copco by mark bonel on 2012-04-13 17:51
The Atlas-Copco Electronikon 1900-0700-08 controller is displaying an error message "Low Pressure Alarm" and the machine is not providing enough air pressure for the production line to operate efficiently.

—> Purchase or Repair:
#Atlas-Copco by dinh cong nguyen on 2012-11-12 07:40
Received alert on Elektronikon 1900-0700-08 controller - drive/board failure. Heading your way to inspect. Stand by.

—> Purchase or Repair:
#Atlas-Copco by mario cardona on 2012-11-24 03:19
Atlas-Copco Electronikon 1900-0700-08 not responding to controls.

—> Purchase or Repair:
#Atlas-Copco by Betta Wu on 2012-07-25 11:10
Machine displaying error code 1043.

—> Purchase or Repair:
#Atlas-Copco by Caufman on 2012-03-01 23:14
Our Atlas-Copco Elecktronikon 1900-0700-08 controller is still down. We need immediate assistance. Kindly provide support as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by walter zambrana on 2012-03-29 20:18
Electronikon 1900-0700-08 controller displaying error code E0010.

—> Purchase or Repair:
#Atlas-Copco by schepers didier on 2012-02-22 02:22
Hello, I'm reaching out on behalf of our client who is experiencing some issues with an Atlas-Copco Elecktronikon 1900-0700-08 Controller. Could you please provide us with information on resolving this problem? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Peter Marshall on 2012-05-02 08:25
One of the units isn't working. It's an Atlas-Copco Elecktronikon 1900-0700-08, described as a controller.

—> Purchase or Repair:
#Atlas-Copco by Greg Klein on 2012-06-06 18:48
The Atlas-Copco Electronikon 1900-0700-08 is displaying error code 345. Machine is not responding to inputs and not completing cycles. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.