Atlas-Copco Service & Repair Forum

We experienced unexpected downtime due to a malfunction with the Atlas-Copco Electronikon 1900-0700-08 controller. The issue occurred at 430 AM today, and we need to address it before the next shift. Please advise on how to proceed.

—> Purchase or Repair: Ticket Image

— Posted by Todd Sarraf on 2012-08-28

Reply🗨️Ask a New Question Below❓

If you need your Atlas-Copco unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 100 Comments

#Atlas-Copco by Huelgas on 2011-04-06 09:59
I'm reaching out on behalf of my client who has an issue with the Atlas-Copco Elecktronikon part number 1900.0590.74, which is a Control Unit. Could you please provide information on troubleshooting or repair options for this part? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Fanie on 2012-05-12 21:21
I am experiencing some issues with the Atlas-Copco Elektronikon 1900-0700-08 controller. It seems like something has stopped working properly. I'm not sure about the specifics, but any assistance would be greatly appreciated.

—> Purchase or Repair:
#Atlas-Copco by dinh cong nguyen on 2012-11-12 07:40
Received alert on Elektronikon 1900-0700-08 controller - drive/board failure. Heading your way to inspect. Stand by.

—> Purchase or Repair:
#Atlas-Copco by Joseph Cooney on 2017-09-22 00:00
Hi there, our Atlas-Copco 1900-0700-08 Control Display stopped working, and we need a replacement. Can you please provide repair info urgently? Thanks!

—> Purchase or Repair:
#Atlas-Copco by Dan Regan on 2012-02-16 10:52
Experiencing issues with my Atlas-Copco Electronikon 1900-0700-08 controller, need repairs urgently. Unit not powering on despite multiple attempts. Thank you.

—> Purchase or Repair:
#Atlas-Copco by soni on 2012-12-03 18:43
Could you please confirm if the Atlas-Copco Elecktronikon 1900-0700-08 controller is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Caufman on 2012-03-01 23:14
Our Atlas-Copco Elecktronikon 1900-0700-08 controller is still down. We need immediate assistance. Kindly provide support as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Douglas Lefeve on 2012-09-30 18:57
Could you please confirm if the Atlas-Copco Elecktronikon 1900-0700-08 controller is still supported, and if replacement parts are available? We are looking for repair options for this older unit but are unsure of the manufacturer. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Tin on 2012-08-06 15:04
I'd like to inquire about the pricing and availability of the Atlas-Copco Elecktronikon 1900-0700-08 controller. We're interested in acquiring one urgently and would appreciate any information you can provide. Thank you.

—> Purchase or Repair:
#Atlas-Copco by john stephen on 2012-12-03 06:48
The Elecktronikon 1900-0700-08 is displaying an error code 15 and the machine is not responding to any commands.

—> Purchase or Repair:
#Atlas-Copco by Leo McCarthy on 2012-12-22 01:40
I have observed unusual behavior from an Atlas-Copco Electronikon 1900-0700-08 unit in the warehouse.

—> Purchase or Repair:
#Atlas-Copco by Ted Bueschel on 2011-12-28 20:30
The Atlas-Copco Elecktronikon 1900.0590.74 is a Control Unit that is not working correctly. That's the information I have at the moment.

—> Purchase or Repair:
#Atlas-Copco by Wanchai on 2012-12-20 01:48
Do you have an Atlas-Copco Elecktronikon 1900-0700-08 available for sale or repair? Our unit has gone down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Roman Soroka on 2012-05-15 19:43
The Atlas-Copco Elecktronikon 1900-0700-08 isn't working. The maintenance team needs to check this Controller unit.

—> Purchase or Repair:
#Atlas-Copco by benny hewitt on 2012-08-15 23:11
We experienced downtime due to an issue with the Atlas-Copco Elecktronikon 1900-0700-08 controller. Can you look into this and provide feedback before the next shift starts?

—> Purchase or Repair:
#Atlas-Copco by KOMAX on 2012-02-17 09:52
The Atlas-Copco Electronikon 1900-0700-08 controller malfunctioned during the night shift. Needs attention ASAP.

—> Purchase or Repair:
#Atlas-Copco by MUJJAFAR on 2012-01-28 02:13
Hi there, I'm reaching out on behalf of a client who is experiencing issues with an Atlas-Copco Electronikon 1900-0700-08 Controller. Could you kindly provide information on troubleshooting and repair services available for this part? Any assistance would be greatly appreciated. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#Atlas-Copco by Shaffer on 2012-05-26 06:25
Could you please provide information on the pricing and availability of the Atlas-Copco Elecktronikon 1900-0700-08 controller? I am looking to source one quickly and would appreciate your assistance in this matter. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Ariel on 2012-08-14 22:46
Hi there! Just checking in to see if the Atlas-Copco Elecktronikon 1900-0700-08 controller can be repaired or if a replacement can be bought. Trying to get this sorted out as part of my to-do list. Let me know, thank you!

—> Purchase or Repair:
#Atlas-Copco by AGBOOLA on 2012-07-18 08:36
Could you please provide information on pricing and availability for the Atlas-Copco Elecktronikon 1900-0700-08 controller? I am interested in purchasing one urgently. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Cezaretti on 2012-06-30 12:05
The Atlas-Copco Electronikon 1900-0700-08 controller unit is not working and needs attention from the maintenance team.

—> Purchase or Repair:
#Atlas-Copco by Godwin on 2011-10-15 20:43
The Atlas-Copco Elecktronikon 1900.0590.74 is a control unit that is currently not working properly. The maintenance team needs to inspect and repair it as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Telecasterkds on 2012-01-17 21:18
Could you please provide information on whether the Atlas-Copco Electronikon 1900-0700-08 controller is still supported or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Marouani Nejib on 2012-11-28 01:11
Hello, I wanted to inquire about the support and availability of parts for the Atlas-Copco Electronikon 1900-0700-08 controller. Is this unit still supported, and are replacement parts available for it? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Manny Meraz on 2012-01-14 08:06
There was a downtime caused by the malfunction of the Atlas-Copco Elecktronikon 1900-0700-08 controller. This occurred earlier today during the morning shift. Your

—> Purchase or Repair:
#Atlas-Copco by Bethune on 2011-02-05 13:12
My Atlas-Copco Elecktronikon 1900.0590.74 Control Unit is displaying error codes and not responding to commands. Looking for a technician to troubleshoot and repair

—> Purchase or Repair:
#Atlas-Copco by Ahmed Elshreef on 2012-01-07 14:11
The Atlas-Copco Elecktronikon 1900-0700-08 is not working. Please look into it.

—> Purchase or Repair:
#Atlas-Copco by Peter Marshall on 2012-05-02 08:25
One of the units isn't working. It's an Atlas-Copco Elecktronikon 1900-0700-08, described as a controller.

—> Purchase or Repair:
#Atlas-Copco by ALEXANDER GONZALEZ on 2011-03-11 05:32
We experienced downtime due to an issue with the Atlas-Copco Elecktronikon 1900.0590.74 Control Unit. This occurred today during your shift. Can you provide any insight or solutions before the next shift arrives?

—> Purchase or Repair:
#Atlas-Copco by Greg Rietman on 2012-05-18 07:35
The Atlas-Copco Electronikon 1900-0700-08 controller is not working.

—> Purchase or Repair:
#Atlas-Copco by Michael Matheny on 2012-07-24 14:55
I need repair info for Atlas-Copco Elecktronikon 1900-0700-08 controller. Urgent replacement needed but can't find one. Please advise.

—> Purchase or Repair:
#Atlas-Copco by Ahmad Niazi on 2012-10-19 14:43
The Atlas-Copco Electronikon 1900-0700-08 controller on machine 5 just went down. Need to troubleshoot ASAP to get it back up and running.

—> Purchase or Repair:
#Atlas-Copco by EDGAR DIAZ SANCHEZ on 2011-12-22 18:00
The Atlas-Copco Elecktronikon 1900.0590.74 control unit is not working.

—> Purchase or Repair:
#Atlas-Copco by igarashi on 2012-01-01 16:53
Hello, I am inquiring about the Atlas-Copco Elecktronikon 1900-0700-08 controller for my client. They are experiencing issues with it and would like more information on repair options. Thank you.

—> Purchase or Repair:
#Atlas-Copco by Lacouture on 2012-04-20 16:05
I'm experiencing an issue with the Atlas-Copco Elecktronikon 1900-0700-08 controller. The machine has stopped working properly, and I'm not sure what the exact problem is. I would appreciate assistance in diagnosing and fixing the issue.

—> Purchase or Repair:
#Atlas-Copco by David J Langley on 2012-06-11 12:33
I can help with that. I'll reach out to inquire about repairing or purchasing a replacement for your Atlas-Copco Elecktronikon 1900-0700-08 controller. I'll keep you posted as I work on checking this off your to-do list.

—> Purchase or Repair:
#Atlas-Copco by John Fitza on 2011-05-09 17:56
Hello, do you have an Atlas-Copco Elecktronikon 1900.0590.74 Control Unit available for purchase or repair? Our unit went down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Atlas-Copco by XRumerTest on 2011-07-04 17:52
Our Atlas-Copco Elecktronikon 1900.0590.74 Control Unit is still down. We need immediate assistance. Please get back to us as soon as possible.

—> Purchase or Repair:
#Atlas-Copco by Thulani on 2012-12-06 03:32
Experiencing issues with my Atlas-Copco Electronikon 1900-0700-08 controller unit. Need technical assistance for repair. Please reach out if you can provide support.

—> Purchase or Repair:
#Atlas-Copco by Todd Sarraf on 2012-08-28 21:43
We experienced unexpected downtime due to a malfunction with the Atlas-Copco Electronikon 1900-0700-08 controller. The issue occurred at 430 AM today, and we need to address it before the next shift. Please advise on how to proceed.

—> Purchase or Repair:
#Atlas-Copco by muftah elsahly on 2012-09-26 23:36
The Atlas-Copco Elecktronikon 1900-0700-08 unit is down. Need daytime crew to follow up.

—> Purchase or Repair:
#Atlas-Copco by david walmsley on 2012-08-03 22:24
Do you have an Atlas-Copco Electronikon 1900-0700-08 available for sale or repair? Our production is down, and we need a replacement ASAP.

—> Purchase or Repair:
#Atlas-Copco by vikas borana on 2012-03-20 21:44
I noticed that the Atlas-Copco Elecktronikon 1900-0700-08 unit in the warehouse is behaving unusually. It is displaying erratic behavior and not functioning as it normally does.

—> Purchase or Repair:
#Atlas-Copco by Kevin Chen on 2012-03-12 09:55
Hello, I'm interested in purchasing an Atlas-Copco Electronikon 1900-0700-08 Controller. I wanted to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Atlas-Copco by varenhorst on 2012-05-15 17:43
The Atlas-Copco Electronikon 1900-0700-08 controller unit went down mid-shift. Please review and address the issue during the day shift. Thank you!

—> Purchase or Repair:
#Atlas-Copco by schepers didier on 2012-02-22 02:22
Hello, I'm reaching out on behalf of our client who is experiencing some issues with an Atlas-Copco Elecktronikon 1900-0700-08 Controller. Could you please provide us with information on resolving this problem? Thank you.

—> Purchase or Repair:
#Atlas-Copco by Odilia Korenek on 2011-05-07 12:36
Atlas-Copco Elecktronikon 1900.0590.74 Control Unit displaying error code "SAFETY STOP".

—> Purchase or Repair:
#Atlas-Copco by Evgeniy on 2012-08-21 19:46
Could you please provide repair information for an Atlas-Copco Elecktronikon 1900-0700-08 controller? It stopped working, and we are looking for a replacement. Thanks!

—> Purchase or Repair:
#Atlas-Copco by Maharajan on 2012-06-06 19:48
The Atlas-Copco Elecktronikon 1900-0700-08 controller unit in the shop is not working.

—> Purchase or Repair:
#Atlas-Copco by neal gant on 2012-06-14 04:48
Do you have an Atlas-Copco Electronikon 1900-0700-08 available for sale or repair?

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.