Electroglas Service & Repair Forum
One of the drives or boards on Electroglas 10040 A1 failed, affecting Ramp Slope and Align Load Control. Will troubleshoot and update once resolved.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
If you need your Electroglas unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 54 Comments
Could you please confirm if the Electroglas 100016 A3 is still supported or if replacement parts are available? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am reaching out on behalf of a client who is having an issue with an Electroglas 100020 A4, specifically related to the Interface Control. Can you please provide more information on the repair process for this part number? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we have an Electroglas 100004 A6 here that needs a replacement part. Could you provide repair information or recommend a repair shop? Appreciate a
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Electroglas 100032 A5 available for sale or repair to keep our production running smoothly?
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 10000 A4 unit is not functioning properly. It is related to Interface Control. That's all the information I have.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide information regarding the Ramp Length and Velocity Control issue for Electroglas 102676 A5. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide guidance or assistance regarding the Electroglas 100004 A6 single-axis pulse control unit. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
One of the drives or boards on the Electroglas 100016 A3 Prober Cycle Control just failed need immediate attention.
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100020 A4 is showing Error Code 345 and is constantly beeping with the alarm "Interface Control Failure." The equipment is currently down and preventing production. Please advise on next steps for troubleshooting and repair.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with Electroglas 100020 A4 - specifically the Interface Control. Need immediate repair service for this industrial unit. Contact me as soon as possible to discuss options.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Electroglas 100004 A6 available for sale or repair to keep our production running?
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100016 A3 Prober is down mid-shift. Please check and troubleshoot it in the morning. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
There was downtime with the Electroglas 100016 A3 during the last shift. The issue was related to the Prober Cycle Control. Can you please provide more details about what happened and let us know when the problem occurred? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
My Electroglas 100004 A6 seems to have an issue with the Single Axis Pulse Control and requires repair. Looking for a technician who specializes in industrial unit repairs to assess and fix the problem
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100004 A6 has a Single Axis Pulse Control feature that the maintenance team is having trouble with.
—> Purchase or Repair:
—> Purchase or Repair:
Looking for repair service for my Electroglas 100016 A3 prober cycle control unit. Unit not operating/syntax errors. Need reliable industrial repair technician ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am reaching out on behalf of my client who is experiencing issues with an Electroglas 102710 Option. They are seeking information regarding this particular part. Can you please provide details on troubleshooting or repair options available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime due to issues with the ramp length and velocity control on Electroglas 102676 A5. It occurred during the last shift. Please provide feedback before the next shift begins.
—> Purchase or Repair:
—> Purchase or Repair:
Electroglas 100016 A3 experienced issues with the Prober Cycle Control, causing downtime on our shift. Can you provide details on what went wrong and when it occurred? I need to report this before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100016 A3 prober is showing error code 3021 and not completing the testing cycle. Need urgent assistance to troubleshoot and resolve the issue. Please advise on next steps.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Electroglas 100016 A3 Prober Cycle Control unit available for sale or repair? Our production is halted, and we need a solution quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Dear Repair Service Team,The Electroglas 100016 A3 Prober Cycle Control is malfunctioning, halting production. Immediate attention needed to minimize downtime and resume operations swiftly. Please prioritize this issue for a
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 102676 A5 is displaying Error Code 54 - "Ramp Length and Velocity Control Failure." The equipment is not responding to velocity adjustments, leading to process disruptions. Please advise on troubleshooting steps or repairs needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100016 A3 Prober Cycle Control unit in the warehouse is displaying abnormal behavior. It is not following its usual cycle and is acting strangely. Please investigate this issue further to ensure proper functionality.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I need to report that the Electroglas 100016 A3 Prober Cycle Control unit malfunctioned during the previous shift, causing unexpected downtime. Can you provide an update on what went wrong and when this occurred before the next shift starts? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hey team, the issue we're dealing with on the Electroglas 102676 A5 unit is with the Ramp Length and Velocity Control. Let's have someone look into this
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Electroglas 100004 A6 available for repair or purchase to keep production running?
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we're currently experiencing an issue with our Electroglas 100016 A3 related to the Prober Cycle Control. Can you please provide repair information or assistance as soon as possible? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
One of the drives or boards on Electroglas 10040 A1 failed, affecting Ramp Slope and Align Load Control. Will troubleshoot and update once resolved.
—> Purchase or Repair:
—> Purchase or Repair:
Electroglas 100032 A5 issue unable to control Ramp Length and Velocity. Line affected, urgent repair needed.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Electroglas 100020 A4 Interface Control unit available for sale or repair? Our production downtime is relying on finding a solution quickly.
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100016 A3 Prober Cycle Control unit is not functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the Electroglas 102676 A5 is still supported and if replacement parts are available for it? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have another Electroglas 100004 A6 available for sale or repair to keep our production running?
—> Purchase or Repair:
—> Purchase or Repair:
Hey team, the Electroglas 100016 A3 Prober Cycle Control unit went down mid-shift. It needs attention before the next cycle. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
I am reaching out to inquire if you have an Electroglas 102710 Option available for sale or repair. Our unit is currently down, and we need to keep production running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Electroglas 100004 A6 is experiencing a malfunction in its single axis pulse control, disrupting our production line. Urgent repair service intervention is required to minimize downtime and resume operations
—> Purchase or Repair:
—> Purchase or Repair:
It seems like the Electroglas 100004 A6 is experiencing an issue with its single-axis pulse control feature. I'm not entirely sure how this model operates, but it appears that something has stopped working. If you could provide more information, we may be able to troubleshoot the problem more effect…Purchase or Repair: 
...
Show More
Show More
Can the Electroglas 100032 A5, specifically the Ramp Length and Velocity Control, be repaired or replaced? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 102676 A5 on the production line is experiencing issues with the Ramp Length and Velocity Control. This is disrupting our operations, and we need urgent attention to get it back up and running smoothly. Please address this matter
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Electroglas 100012 A2 machine while trying to Set Up & Auto Seq. It seems like something has stopped working, but I'm unsure what exactly. Assistance with troubleshooting or repair would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, I'm reaching out on behalf of a client in need of assistance with an Electroglas 100016 A3 Prober Cycle Control. Can you please provide more information on the repair process for this item? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi there, we are in need of repair information for an Electroglas 100004 A6 with Single Axis Pulse Control. Can you please provide us with details on how to fix it? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Electroglas 100004 A6 unit is not functioning properly. Please review and troubleshoot accordingly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing the Electroglas 100004 A6 Single Axis Pulse Control unit. Can you please provide information on pricing and availability? We are trying to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Show More