Elektronikon Service & Repair Forum

One of the drives or boards on the Elektronikon Atlas Copco 1900070007 controller just failed, need immediate attention to troubleshoot and replace.

—> Purchase or Repair: Ticket Image

— Posted by Arif Ahmed on 2013-08-11

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Elektronikon"

If you need your Elektronikon unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 462 Comments

#Elektronikon by Rich Kleffner- Advan on 2013-08-13 21:35
Can the Elektronikon Atlas Copco 1900070007 controller be repaired or should it be replaced? I'm looking to resolve this soon, trying to tick it off my to-do list. Thank you.

—> Purchase or Repair:
#Elektronikon by Engr on 2015-07-29 21:20
Hello repair shop, we need repair information for an Elektronikon Atlas Copco 1900 0700 07 eletroicon controller. Our equipment is currently down and we require a replacement. Please provide repair details as soon as possible. Thank you.

—> Purchase or Repair:
#Elektronikon by Goulandris on 2009-10-19 15:22
Hello, I am reaching out on behalf of a client who is experiencing an issue with the Elektronikon Atlas Copco 1900070008 digital readout. Can you please provide information on how to troubleshoot and repair this specific part? Thank you.

—> Purchase or Repair:
#Elektronikon by Richard Williams on 2009-06-10 21:44
Please provide information and repair options for Elektronikon Atlas Copco part number 1900070008 with a digital readout issue. Thank you.

—> Purchase or Repair:
#Elektronikon by Mark A. Robinson on 2013-11-27 05:04
the Elektronikon 19000598 control unit went down mid-shift. Need someone to follow up on this during the day. Thanks!

—> Purchase or Repair:
#Elektronikon by BLONDHEIM on 2013-08-17 17:01
Elektronikon Atlas Copco 1900 0700 05 controller not responding, causing production downtime.

—> Purchase or Repair:
#Elektronikon by Santer on 2009-03-17 18:53
Help needed with Elektronikon Atlas Copco part number 1900070008, digital readout issue. Please provide details for our client's equipment. Thank you.

—> Purchase or Repair:
#Elektronikon by Jeff Thoma on 2015-07-11 18:32
Dear ,I have an Elektronikon Atlas Copco 1900 0700 07 control unit that needs to be fixed or replaced. Can you confirm if it can be repaired or if I need to purchase a new one? I'd appreciate your

—> Purchase or Repair:
#Elektronikon by Rafael Pichardo on 2009-07-16 09:46
just a heads up that the Elektronikon on Atlas Copco 1900070008 is down - looks like a failed drive or board. Heading over to check it out now.

—> Purchase or Repair:
#Elektronikon by Shibu John on 2009-12-05 18:34
Hello, I am interested in purchasing an Elektronikon Atlas Copco 1900070008 digital readout unit. I'm not entirely certain if this is the correct model, but I would like to inquire about pricing and availability. I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by HEMESH PAL on 2009-02-16 14:28
The Elektronikon Atlas Copco 1900070008 digital readout unit is not functioning properly.

—> Purchase or Repair:
#Elektronikon by Jessmon on 2009-12-22 08:28
Do you have an Elektronikon Atlas Copco 1900070008 available for repair or purchase? Our unit has gone down, and we need to keep production running.

—> Purchase or Repair:
#Elektronikon by alok bikash sadangi on 2013-07-09 13:32
My client is experiencing issues with an Elektronikon Atlas Copco 1900 0700 05 controller. Can you provide details on how we can address this problem? Thank you.

—> Purchase or Repair:
#Elektronikon by Chicaiza on 2013-08-17 01:32
just a heads up, Elektronikon Atlas Copco 1900 0700 05 controller just went kaput. Need to diagnose and replace ASAP.

—> Purchase or Repair:
#Elektronikon by Jasser Dominguez on 2013-12-06 09:48
The Elektronikon Atlas Copco 1900 0700 05 controller malfunctioned today during the morning shift, leading to unexpected downtime. We need a quick resolution before the next shift. Can you please assist with identifying and rectifying the issue

—> Purchase or Repair:
#Elektronikon by Darrell Jones on 2013-10-17 06:48
We need a response regarding the Elektronikon Atlas Copco 1900 0700 05 controller as the unit is still down. Please provide an update

—> Purchase or Repair:
#Elektronikon by Matt LaFleur on 2008-03-21 23:53
Hello, I am interested in purchasing an Elektronikon 1900 0710 32 controller. Could you please provide information about pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by Richard Darr on 2008-01-29 14:10
We are experiencing a critical failure with the Elektronikon 4900-0590-26 support control module, causing a complete halt in production. Immediate repair service is needed to restore functionality and minimize downtime.

—> Purchase or Repair:
#Elektronikon by brunner on 2009-03-11 05:11
Hi there, I wanted to inquire about the Elektronikon Atlas Copco 1900070008 digital readout unit. We are trying to determine if this older unit is still supported or if replacement parts are available. Could you please provide information on the availability of support or replacement options for thi…Purchase or Repair: Ticket Image...
Show More
#Elektronikon by cy on 2009-09-12 23:32
Please provide information regarding pricing and availability for the Elektronikon Atlas Copco 1900070008. We are interested in acquiring this unit

—> Purchase or Repair:
#Elektronikon by karaali on 2025-05-30 14:24
Elektronikon Atlas Copco 1900 0700 05 displaying error code 123.

—> Purchase or Repair:
#Elektronikon by Kanishka Weerathunge on 2008-03-20 23:56
I'm currently experiencing some challenges with the Elektronikon Atlas Copco 1900 0598 02 master control module. It seems like something isn't working as it should, and the machine might be malfunctioning. Please advise on the next steps to diagnose and resolve this issue.

—> Purchase or Repair:
#Elektronikon by Mr.PORAMADE on 2009-11-07 14:21
Do you have a replacement Elektronikon Atlas Copco 1900070008 unit available for sale or repair? Our production has been impacted and we are hoping to replace it quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by Wendy Smith on 2009-08-13 09:45
The Elektronikon Atlas Copco 1900070008 is displaying Error Code 1023 which indicates a communication error. Equipment is down due to this issue. Please advise on troubleshooting steps.

—> Purchase or Repair:
#Elektronikon by SELF on 2013-06-07 21:40
The Elektronikon Atlas Copco 1900070007 controller unit isn't working.

—> Purchase or Repair:
#Elektronikon by Prem Allencherry on 2009-03-09 22:11
Elektronikon Atlas Copco 1900070008 showing error code E1234.

—> Purchase or Repair:
#Elektronikon by SELIM on 2009-12-04 04:00
The Elektronikon Atlas Copco 1900070008 unit has a digital readout malfunction. Requires attention and troubleshooting, possibly a sensor issue. Please check and diagnose during the day shift. Thanks!

—> Purchase or Repair:
#Elektronikon by Lazaros on 2008-01-17 05:56
Hello, I am interested in purchasing the Elektronikon 1900-0590-16 master control module. Could you please provide information on pricing and availability? I am looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by Dawn on 2013-06-23 11:17
We experienced downtime due to an issue with the Elektronikon Atlas Copco 1900 0700 05 controller. Can you please provide assistance on what caused this and when it occurred? Need a quick resolution before the next shift.

—> Purchase or Repair:
#Elektronikon by Rashidul on 2015-03-09 11:13
My Elektronikon Atlas Copco 1900070105 controller is not powering up or responding. Need a service technician to troubleshoot and repair it as soon as possible to minimize downtime. Thank you.

—> Purchase or Repair:
#Elektronikon by Caplinger on 2015-07-20 03:20
Unit 1900 0700 05 Elektronikon controller down. Please check and fix during the day shift.

—> Purchase or Repair:
#Elektronikon by Mr Kenneth Opoku on 2008-03-16 07:28
Hello, I'm in the purchasing department and I need repair information for an Elektronikon 1900-0590-16 master control module. It stopped working and we need a replacement. Can you please provide assistance quickly on this matter? Thank you.

—> Purchase or Repair:
#Elektronikon by Luis Alcantara on 2013-07-10 02:32
Elektronikon 19000598 not starting up, displaying error code 3100.

—> Purchase or Repair:
#Elektronikon by abdoaakl on 2009-09-24 01:07
The Elektronikon Atlas Copco unit with serial number 1900070008 is displaying abnormal behavior with the digital readout. The readings are fluctuating erratically and not displaying accurate information as usual. Please investigate the issue further and contact maintenance for assistance. —> …Purchase or Repair: Ticket Image...
Show More
#Elektronikon by Robert Cogan on 2013-08-09 21:32
Unit 1900070007, the Elektronikon Atlas Copco controller, malfunctioned today during the evening shift at 830 PM, causing unexpected downtime. Need assistance ASAP before the next shift begins.

—> Purchase or Repair:
#Elektronikon by Steve Pickel on 2008-01-09 07:12
I will reach out and inquire about the support and availability of parts for your Elektronikon 4900-0590-26 control module.

—> Purchase or Repair:
#Elektronikon by ASHIS MANDAL on 2009-09-24 03:07
Elektronikon Atlas Copco 1900070008 just threw an error - digital readout failed on one of the drives/boards. Get it checked ASAP to avoid downtime.

—> Purchase or Repair:
#Elektronikon by Alex G. on 2009-09-07 14:00
Could you please confirm if the Elektronikon Atlas Copco 1900070008 is still supported or if replacement parts are available for this unit? We are exploring repair options for this older digital readout device but are unsure about its current status.

—> Purchase or Repair:
#Elektronikon by Mehrotra on 2009-12-12 12:44
The Elektronikon on our Atlas Copco 1900070008 is displaying error code E123. The equipment is down and not functioning. Please advise on next steps to troubleshoot and resolve the issue. Thank you.

—> Purchase or Repair:
#Elektronikon by Attwood on 2015-07-31 02:20
I can certainly help with that. I will inquire about the support status and the availability of parts for the Elektronikon Atlas Copco 1900 0700 07 Control Unit.

—> Purchase or Repair:
#Elektronikon by SUYDAM on 2013-10-11 19:42
Please advise if the Elektronikon 19000598 control unit is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Elektronikon by Daniel Cabral on 2008-02-14 18:19
The Elektronikon 1900 0701 24 unit is not working.

—> Purchase or Repair:
#Elektronikon by Bob Wentworth on 2013-06-03 18:10
The Elektronikon 19000598 control unit in the shop isn't working.

—> Purchase or Repair:
#Elektronikon by Evegniy on 2009-01-24 04:59
The Elektronikon Atlas Copco 1900070008 digital readout is displaying abnormal behavior in the warehouse. It is not functioning as it normally does.

—> Purchase or Repair:
#Elektronikon by Dennis Ingalls on 2008-01-25 21:59
The unit isn't working.

—> Purchase or Repair:
#Elektronikon by Varicon on 2015-08-06 18:20
Drive or board failure detected in Elektronikon Atlas Copco 1900 0700 05 controller unit. Notify maintenance team for immediate action.

—> Purchase or Repair:
#Elektronikon by Ismail Manaqibwala on 2013-08-15 00:32
Can the Elektronikon Atlas Copco 1900070007 controller be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Elektronikon by Damaris Liborio on 2015-03-07 10:15
The Elektronikon Atlas Copco 1900070105 unit is not working.

—> Purchase or Repair:
#Elektronikon by Jon Bass on 2008-01-17 18:23
We experienced downtime on the Elektronikon Atlas Copco 1900 0710 32 controller unit earlier today at 345 PM. Can you provide a quick answer on what caused the issue before the next shift arrives?

—> Purchase or Repair:
#Elektronikon by Ghidey on 2009-07-23 10:11
The Elektronikon Atlas Copco 1900070008 is showing error code E001 and the digital readout is blank. Equipment is currently down, urgent service needed.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.