Elektronikon Service & Repair Forum

We are experiencing a critical failure with the Elektronikon 4900-0590-26 support control module, causing a complete halt in production. Immediate repair service is needed to restore functionality and minimize downtime.

—> Purchase or Repair: Ticket Image

— Posted by Richard Darr on 2008-01-29

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Elektronikon"

If you need your Elektronikon unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 462 Comments

#Elektronikon by Ýsmail on 2015-02-02 14:39
The Elektronikon Atlas Copco 1900 0700 05 controller unit is malfunctioning, causing a critical disruption in our production line. Immediate attention and repair service are required to ensure minimal downtime and resume operations swiftly.

—> Purchase or Repair:
#Elektronikon by Boban Stevanovski on 2013-08-11 11:32
Hey, the Elektronikon on unit 1900 0700 05 crapped out mid-shift. Needs fixing pronto. Make sure to check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Elektronikon by Rodberg on 2010-04-17 17:56
I am following up on the Elektronikon Atlas Copco 1900070125 issue and the unit is still down. Please reply to this message at your earliest convenience to address the situation

—> Purchase or Repair:
#Elektronikon by ben guttridge on 2009-01-22 06:06
Hello, I am interested in purchasing the Elektronikon Atlas Copco 1900070008 digital readout unit. I am not entirely certain if this is the correct model, but my team recommended that I reach out to inquire. Can you please provide pricing and availability information? I am looking to source one quic…Purchase or Repair: Ticket Image...
Show More
#Elektronikon by TAYFUN on 2009-04-04 04:42
our Elektronikon Atlas Copco 1900070008 digital readout is down. Urgently need repair info. Can you provide guidance or refer us to a local repair shop? Thanks!

—> Purchase or Repair:
#Elektronikon by shivaram prasad on 2009-08-01 20:02
The Elektronikon Atlas Copco 1900070008 went down mid-shift, digital readout not working. Please look into it first thing in the morning. Thanks!

—> Purchase or Repair:
#Elektronikon by roman ramirez najera on 2009-12-03 09:09
Do you have an Elektronikon Atlas Copco 1900070008 digital readout available for sale or repair? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Elektronikon by magnien on 2008-05-20 19:29
We are still experiencing issues with the Elektronikon Atlas Copco 1900 0598 02 master control module. Please provide an update on the situation

—> Purchase or Repair:
#Elektronikon by m j cars on 2009-01-29 23:55
The Elektronikon Atlas Copco 1900070008 unit is still down. This issue needs urgent attention. Please provide an update as soon as possible.

—> Purchase or Repair:
#Elektronikon by Jasmin on 2025-06-05 04:08
Please ensure that someone responds to this message

—> Purchase or Repair:
#Elektronikon by Eric Libermann on 2009-06-12 23:28
the Elektronikon Atlas Copco 1900070008 unit went down mid-shift. Digital readout isn't working. Please have someone check it out in the morning. Thanks!

—> Purchase or Repair:
#Elektronikon by RobertWhend on 2009-01-26 17:35
Hello, I am interested in purchasing an Elektronikon Atlas Copco 1900070008 digital readout. Can you please provide information regarding pricing and availability? I am eager to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by lou on 2009-10-03 01:07
Please provide an update on the status of my Elektronikon Atlas Copco 1900070008. The unit is still down and needs immediate attention.

—> Purchase or Repair:
#Elektronikon by Dipesh Trivedi on 2008-03-20 22:56
Seeking repair for Elektronikon Atlas Copco 1900 0598 02 master control module. Unit not functioning properly, impacting production. Assistance needed

—> Purchase or Repair:
#Elektronikon by Aquino on 2009-11-17 20:47
Hello, I'm looking for repair info for an Elektronikon Atlas Copco 1900070008 with a digital readout that stopped working. Can you please provide guidance on how to fix this issue

—> Purchase or Repair:
#Elektronikon by Romuald on 2013-08-11 12:32
The Elektronikon Atlas Copco 1900 0700 05 unit is not working. It's a controller, but I'm not entirely sure of its function.

—> Purchase or Repair:
#Elektronikon by Tomas on 2009-03-10 10:11
Hello, I'm interested in the Elektronikon Atlas Copco 1900070008 digital readout unit. Could you please provide me with information regarding pricing and availability? I need to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by brunner on 2009-03-11 05:11
Hi there, I wanted to inquire about the Elektronikon Atlas Copco 1900070008 digital readout unit. We are trying to determine if this older unit is still supported or if replacement parts are available. Could you please provide information on the availability of support or replacement options for thi…Purchase or Repair: Ticket Image...
Show More
#Elektronikon by DITTMER on 2015-08-04 22:20
We experienced downtime due to an issue with the Elektronikon Atlas Copco 1900 0700 05 controller. Can you please provide a quick explanation of what happened and when it occurred? Thank you!

—> Purchase or Repair:
#Elektronikon by Matt LaFleur on 2008-03-21 23:53
Hello, I am interested in purchasing an Elektronikon 1900 0710 32 controller. Could you please provide information about pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by dievorseern on 2013-06-06 19:52
Elektronikon 19000598 not booting up.

—> Purchase or Repair:
#Elektronikon by Kevin McKenzie on 2009-10-30 15:08
I'm currently experiencing issues with our Elektronikon Atlas Copco 1900070008. The digital readout seems to have stopped working. I will need to get this checked out by a technician.

—> Purchase or Repair:
#Elektronikon by Levan on 2009-03-12 09:11
Elektronikon Atlas Copco 1900070008 digital readout displaying error code 345.

—> Purchase or Repair:
#Elektronikon by seddeik on 2009-02-16 02:13
The Elektronikon Atlas Copco 1900070008 unit with a digital readout is not functioning properly. Please take a look at it.

—> Purchase or Repair:
#Elektronikon by Piet Van Cleemput on 2015-08-06 12:20
The Elektronikon Atlas Copco 1900070105 controller malfunctioned, causing unplanned downtime at 345 AM. Need immediate support.

—> Purchase or Repair:
#Elektronikon by ULAS on 2010-02-20 22:29
The Elektronikon Atlas Copco 1900070125 unit in the warehouse is displaying unusual behavior, deviating from its normal operation. It may be helpful to provide more specific details about the strange behavior observed for further assistance.

—> Purchase or Repair:
#Elektronikon by Walter Raleigh on 2008-02-28 05:51
Could you please provide repair information for Elektronikon Atlas Copco 1900 0598 02 master control module? It stopped working and we need a replacement. Thank you!

—> Purchase or Repair:
#Elektronikon by Thiessen on 2016-06-01 20:22
the Elektronikon Atlas Copco 1900 0701 23 controller on unit X went down mid-shift. Needs attention ASAP. Please follow up during the day. Thanks!

—> Purchase or Repair:
#Elektronikon by Robert Cogan on 2013-08-09 21:32
Unit 1900070007, the Elektronikon Atlas Copco controller, malfunctioned today during the evening shift at 830 PM, causing unexpected downtime. Need assistance ASAP before the next shift begins.

—> Purchase or Repair:
#Elektronikon by Maritza Nempeque R. on 2015-07-26 16:20
Elektronikon Control Unit on unit 1900 0700 07 is down. Needs immediate attention when day shift starts. Thanks!

—> Purchase or Repair:
#Elektronikon by Ervin Cockrell on 2013-07-23 17:32
Hello, I'm interested in purchasing an Elektronikon 19000598 control unit. Could you please provide me with information regarding the pricing and availability? I'm looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by John Evangelist on 2009-03-10 02:11
The Elektronikon Atlas Copco 1900070008 digital readout unit is not working.

—> Purchase or Repair:
#Elektronikon by Mitchell Vavra on 2009-05-13 19:54
the Elektronikon Atlas Copco 1900070008 digital readout on one unit went down mid-shift. Needs to be checked first thing tomorrow. Cheers!

—> Purchase or Repair:
#Elektronikon II by Monteiro on 2016-05-31 23:22
The Elektronikon II Control Module on the Atlas Copco 1900 0710 11 unit is not working.

—> Purchase or Repair:
#Elektronikon by Phil Putnam on 2009-03-11 00:11
Can the Elektronikon Atlas Copco 1900070008 be repaired or bought? I'm looking to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Elektronikon by Luis Alcantara on 2013-07-10 02:32
Elektronikon 19000598 not starting up, displaying error code 3100.

—> Purchase or Repair:
One of the drives or boards on the Elektronikon Atlas Copco 1900 0710 32 controller just failed. Need immediate attention to troubleshoot and replace it.

—> Purchase or Repair:
#Elektronikon by Rafael Pichardo on 2009-07-16 09:46
just a heads up that the Elektronikon on Atlas Copco 1900070008 is down - looks like a failed drive or board. Heading over to check it out now.

—> Purchase or Repair:
#Elektronikon by United on 2009-11-13 18:12
Could you please confirm if the Elektronikon Atlas Copco 1900070008 is still supported, and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Elektronikon by Olga on 2009-04-23 17:13
Could you please provide me with the pricing and availability of the Elektronikon Atlas Copco 1900070008? I am interested in purchasing this digital readout unit, and I am hoping to source one quickly. Thank you.

—> Purchase or Repair:
#Elektronikon by Praveen Raj on 2009-11-02 19:57
The digital readout on my Elektronikon Atlas Copco 1900070008 is not displaying any information and the unit is not functioning. I need help fixing it as soon as possible to resume operations.

—> Purchase or Repair:
#Elektronikon by Shake on 2010-10-26 16:22
The Elektronikon Atlas Copco 1900 0700 07 unit is not working. Please take a look at it.

—> Purchase or Repair:
#Elektronikon by GREGG LAYMAN on 2013-08-12 06:32
The Elektronikon 19000598 is a control unit that isn't working as expected. Please take a look at it.

—> Purchase or Repair:
#Elektronikon by mena on 2008-03-15 05:36
Could you please provide information on the pricing and availability of the Elektronikon Atlas Copco 1900 0598 02 master control module? We are looking to source one quickly and want to confirm if this is the correct model. Thank you!

—> Purchase or Repair:
#Elektronikon by Will LaRue on 2007-04-10 00:00
Our Elektronikon Atlas Copco 1900 0700 04 controller is displaying error code 1234 and not responding to commands. Need repair ASAP.

—> Purchase or Repair:
#Elektronikon by Amaechi on 2010-02-15 19:03
Hey there, we need repair info for an Elektronikon Atlas Copco 1900 0700 07 controller that's not working. Can you please send us the details ASAP? Thanks!

—> Purchase or Repair:
#Elektronikon by Gerhard.Mischnick on 2013-09-24 06:48
Hello, we have a client with an Elektronikon 19000598 control unit that needs repair. Could you please provide us with information on the services you offer for this specific part? Thank you.

—> Purchase or Repair:
#Elektronikon by Sanches on 2009-07-23 04:40
the Elektronikon Atlas Copco 1900070008 unit went down during the night shift. Need someone to check it out and fix it. Thanks!

—> Purchase or Repair:
#Elektronikon by Travis Donaldson on 2009-09-15 02:19
Hello, can this Elektronikon Atlas Copco 1900070008 be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Elektronikon by sonny sadler on 2013-08-16 13:32
One of the units in the warehouse that's usually controlled by the Elektronikon Atlas Copco 1900 0700 05 is not functioning normally. It's displaying unusual behavior.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.