Esa/Gv for Service call 1-336-969-0110 at Industrial Electronics Repair

Esa/Gv Service & Repair Forum

vawe:Do you have experience with the Tria PLC? I am trying to understand commands and the operator interface registers.timgh@shaw.ca

—> Purchase or Repair:

— Posted by Tim on 2010-04-25

Reply🗨️Ask a New Question Below❓

If you need your Esa/Gv unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 38 Comments

#Esa/Gv by luis molina on 2010-03-25 15:14

hello.i need repair esa-vg tria 250 not boot,please how much repair??thank

—> Purchase or Repair:

#Esa/Gv by CHRIS PASTOS on 2006-07-16 19:39

Hi,I had similar problem 15 days ago on my beamsaw with the same controler ESA TRIA 4000 and I had to buy a new drive direct from ESA/Gv Italy.They charged me EUR 120 plus another EUR 90 for shipment which I believe is far too much but I had no other choice.I hope this will be a help for youChris Pa…Purchase or Repair:

#Esa/Gv by Žiga on 2010-04-17 16:56

I would really really appriciate if anyone could send me a copy of the english manual for the tria 4000 controller. I am having a very difficult time going through the german version and its killing me since i don\'t speak german very well. Please help!

—> Purchase or Repair:

#Esa/Gv by jeff lewis on 2006-10-14 18:27

Hi folks, I have a tria 4000 controller on a machine we have just got, but it requires a password which we do not have, also we need an instruction manual.please can anyone help.cheers

—> Purchase or Repair:

#Esa/Gv by Itai Aaronson on 2006-08-19 06:27

Need TRIA-PC softwareProgramming software manual.

—> Purchase or Repair:

#Esa/Gv by Alex J. G. on 2007-03-23 19:54

We have same automatic glass cuter bud, have problem with floppy disk 2 or 3 files dont read if you found this floppy start up disk pleace send me image on this disk.thanks :)

—> Purchase or Repair:

#Esa/Gv by jose villanueva marin on 2015-12-16 16:37

Ined for a big problem in may cnc machie te manuals and very information of esa tia 10500 an set up for a scm tech 90 super the memory of parameters is empti now an a need reprogram this

—> Purchase or Repair:

#Esa/Gv by jose villanueva marin on 2015-12-16 16:37

Ined for a big problem in may cnc machie te manuals and very information of esa tia 10500 an set up for a scm tech 90 super the memory of parameters is empti now an a need reprogram this

—> Purchase or Repair:

#Esa/Gv by moez bahri on 2017-10-29 07:19

i need ESA-GV TRIA 4000 Floppy Driver

—> Purchase or Repair:

#Esa/Gv by tim on 2008-03-13 18:54

from base menu hit services, then next menu, than user pass. type in p shift-a s s. the password is infact pass.

—> Purchase or Repair:

#Esa/Gv by TASSOS KOYTSOYKOS on 2006-07-25 05:59

dear sirs, we have an industry that produce office furnitures and we have a MORBIDELLI woodworking machine that uses a esa TRIA 6000 to control all moviments. We have a problem with his drive (3 1/2\"). Does not read the diskets. How can we replace it with a new drive (720kb). ? Is this an 720kb sim…Purchase or Repair:

#Esa/Gv by Maciej on 2008-04-01 22:37

Hi I have a problem to make a backum to floppy when i try making a backup PLC required a PASSWORD but standard pasword \"PASS\" is incorect how to make a backup?or it is any oder way to make a backup?SOMEONE HELP!!!!

—> Purchase or Repair:

#Esa/Gv by JALAL MANSOUR on 2012-06-07 16:17

i have an esa gv tria 371 and i need documentation.would you help me to found it

—> Purchase or Repair:

#Esa/Gv by Bryan on 2012-04-08 18:47

I have an electronic manual for this controller. Do you still need?

—> Purchase or Repair:

#Esa/Gv by MD on 2009-10-07 03:36

ESA TRIA 6000

—> Purchase or Repair:

#Esa/Gv by Mohamed on 2018-06-20 14:26

I think easy software

—> Purchase or Repair:

#Esa/Gv by Lawrence king on 2008-01-23 15:19

HAS NOT BEEN ACTIVE OR TURNED ON FOR SOME TIME. THE BASIC PROGRAM SCREEN IS BLANK WHEN NORMALLY YOU WOULD SEE THE INITIAL SCREEN LAYOUT COME UPAND THEN INSTALL THE PROGRAMMING. IS THERE A SIMPLE FIX FOR THIS?REGARDS

—> Purchase or Repair:

#Esa/Gv by Fernando Dilva on 2013-10-01 17:53

Hello,I try to find the ESA TRIA 4000 MANUAL.we are a flat glass company and I have here a old coopmes machine from flat glass that have this ESA TRIA, and I don´t have any manuals of this machine.I have this problem that when switch on, and start to load the datas, appers all the erros and the PLC …Purchase or Repair:

#Esa/Gv by stamatis on 2009-11-24 18:28

dear sirs i want to now if you have in stock controler esa s96.001.028i need the pcb board .if not undrestund i have picture to help you i need you mail to send picture please contact with me is emergency thanks a lot for your timeStamatis .T Electronic Engineer .T.E.I.s

—> Purchase or Repair:

#Esa/Gv by vawe on 2009-05-27 13:38

passwords default are:123456esagv

—> Purchase or Repair:

#Esa/Gv by Berketis Loukas on 2008-11-27 17:34

Good morning, Mr or Mrs i am Electrician-Engineer in Greece, i repair woodworking machines.I have 2 computers of esa: 1)Is KVARA4 an old one and the other is TRIA 900A.I know you from ELEMAC company.Mrs Barbara told me to speak with Mr Ferrari about.Thanks you very much, I\'ll waitng for your answer…Purchase or Repair:

#Esa/Gv by Arkadiusz on 2012-03-01 21:11

welcome. I have a cnc modbidelli U46. The computer does not display, and sometimes as it appears, does not move the machine. Neither the X or Y or Z. Probably when replacing the battery in your 6000 TRIA has been damaged PCB. We bought a new PCB, but unfortunately the problem is not solved. Can you …Purchase or Repair:

#Esa/Gv by MINH TAN on 2014-09-04 07:02

TRIA ESA 4000

—> Purchase or Repair:

#Esa/Gv by Ro dae-ho on 2012-09-03 08:16

Hello?Serious condition of our equipment, but I wish I could show picturesI can not do that.Symptoms simply talk.On the screen when you turn on the system Base Menu display only field comingAny manipulation is impossible.In these cases, repairs can tell us would be appreciated.E-mail address attache…Purchase or Repair:

#Esa/Gv by Rikard on 2016-10-17 18:02

Did you get any help in the matter of repairing the cutting machine?Best regardsRikard

—> Purchase or Repair:

#Esa/Gv by Mate Zoltan on 2010-07-13 04:46

Dear sirs,we have an industry that produce external doors and we have a MORBIDELLI U26 woodworking machine that uses a esa TRIA 6000 to control all moviments. Something happening with PLC , bat I dont have the Ramdisc.How can we obtain a Ramdisc ?thanks for all,

—> Purchase or Repair:

#Esa/Gv by Paul on 2012-10-31 22:00

Stuck without one, any help please

—> Purchase or Repair:

#Esa/Gv by Claudio Homenko on 2006-06-19 16:46

Good morning!On my plant we have a Coopmes - automatic machine glass cutting - his factory was broken about 5 years ago and it use a ESA TRIA 4000 to control all moviments. Since last march we have a problem in his drive 3 1/2\" of 720Kb that begin to scratch the diskets we input on it.How can I buy…Purchase or Repair:

#Esa/Gv by Tran Xuan Loc on 2018-07-09 00:53

Dear Sir!I have a secondhand Morbidelli U26 CNC, system is Tria 6000, I was turn on the machine but i don't know the password for user. Could you help me please,

—> Purchase or Repair:

#Esa/Gv by Tim on 2010-04-25 14:38

vawe:Do you have experience with the Tria PLC? I am trying to understand commands and the operator interface registers.timgh@shaw.ca

—> Purchase or Repair:

#Esa/Gv by Tec. A. Humberto Serrrano on 2009-07-02 17:29

Hello engineer!In the plant when I work, we have a Coopmes ESA TRIA 4000 (automatic machine glass cuting). This machine present some problems like a swing when the cutter displace on the X axis. I belive that is PLC`s problem but I would like a second opinion before to disarm the machine.I hope your…Purchase or Repair:

#Esa/Gv by Ro Dae-ho on 2012-08-21 00:54

Hello?Of our customers are using products such as below.But as I have not made a sudden failure.Power is turned on, the state, such as a photo display.With start and stop lamps were never gets the keyboard.We do not teach all the keys work at all.You would like to receive the necessary support throu…Purchase or Repair:

#Esa/Gv by Mike Heaton on 2013-07-03 13:39

I also would like to have the manual in electronic format for the Esa Tria 4000.Can you help?Thanks

—> Purchase or Repair:

#Esa/Gv by Alexander Zitnicky on 2009-08-21 09:28

dear sirs, we have an industry that produce wooden windows and we have a BUSELLATO CNC Bearbeitungszentrum SE 13 woodworking machine that uses a esa TRIA 6000 ( made in 1991 years) to control all moviments. We have a problem with his drive. Our need in Instruction manual for esa TRIA 6000 (English o…Purchase or Repair:

#Esa/Gv by Walid Azzam on 2020-02-12 10:53

I just bought a used u26 machine model 1992.I need operation manual and service manual spare parts catalougue if possible

—> Purchase or Repair:

#Esa/Gv by Jacob on 2009-09-02 09:39

Hello.I would like to transfer dwg or dxf (autocad 2009) files from my computer to morbidelli u 46 machine with tria6000.Do You offer any software to this? Or are You able to share postprocessor code?

—> Purchase or Repair:

#Esa/Gv by Israel on 2014-05-01 08:20

I need the power supply for the esa tria 250

—> Purchase or Repair:

#Esa/Gv by Gilles on 2011-11-15 02:17

Good morning.Are you still repairing ESA 6000 computer?Can i get help from you?Where are you from?Best regardsGilles

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.