F for Service call 1-336-969-0110 at Industrial Electronics Repair

F Service & Repair Forum

If you need your F tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

If you need your F unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 296 Comments

#Foxboro/Jordan by Jay Rees on 2011-01-05 15:46

Hi, I am an integrator and will be visiting a new client regarding a JordanControls Dancer Pot. They gave me a part number:PF1010-E-2.89-0-Z-0.I\'d like to make a good impression during my first visit with the client, would you mind answering a few questions?- Is this a valid part number?- Can you r…...
Show More

#Firetrol by Eddie Sim on 2017-08-21 00:12

Please do quote us 2 units of KAS-2001 Battery Charger. Thanks.Thanks & Regards,Eddie SimUltech Engineering Sdn. Bhd.Lot 1493, Piasau Industrial Estate,98000 Miri, SarawakTel: +6085-654133 Fax: +6085-491150Mobile : +6013-8113733www.ultech-engineering.com

—> Purchase or Repair:

#Fg Elektronik by Gilliam on 2013-08-07 16:32

Hey, the Fg Elektronik SNT5-20 V PSU5/4 is down. Need someone to check it out during the day shift.

—> Purchase or Repair:

#Fenwall by Daoust on 2016-02-08 00:00

Of course! Please provide me with a detailed description of the abnormal behavior you noticed on the Fenwall 5701 N/A unit in the warehouse. Any specific noises, lights, or functions that are different from its usual operation would be helpful in diagnosing the issue. Thank you!

#Fanuc by whitaker on 2017-11-28 09:11

Hello, I am contacting you on behalf of a client who is experiencing issues with a Fanuc A20B-1000-0800 10/11 Series 9" MDI/CRT Interface board. Can you please provide details on repair services available for this part? Thank you.

—> Purchase or Repair:

#Ferrocontrol by Aldo G. Quilang on 2006-12-01 12:16

Hello, I'm interested in purchasing a Ferrocontrol D-32049 s18-00-06 servo unit. I'm not entirely certain if this is the correct model, but my team recommended I contact you. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.—> …Purchase or Repair:

#Fieldpiece by Benjamin F Graves on 2009-09-18 17:19

Hi i\'ve tried several times to cailbrate my Fieldpiece HS26. I can only get it to go down to 200V and thats as far as the pot screw goes. should I send it in to you? Or is there something else I can do. Thank you Ben F Graves. Senior Lab Tech-Earthsytems South West, Bermuda Dunes California92203 US…Purchase or Repair:

#Fire-Lite by Imtiaz on 2011-12-01 13:37

Hey team, the Fire-Lite CPU-2000 15081 control board unit went down mid-shift. Needs attention ASAP! Someone needs to check it out in the morning. Thanks!

—> Purchase or Repair:

#Firetrol by Luis Lerman Agudelo Bermudez on 2008-06-17 12:23

not present pulse PWM on TP 18 for converser DC-DC

—> Purchase or Repair:

#Fanuc by Mike Gibbs on 2010-05-06 20:48

I believe there may be an issue with the power unit on the Fanuc A14B-0067-B002-01 A20B-1000-0410/03A machine. It seems like something has stopped working, but I'm not entirely sure what the problem is. We may need to have a technician look into it to determine the exact issue. —> …Purchase or Repair:

#Ferrocontrol by John H Smith on 2007-12-07 15:47

I need cables (encoder and motor) to connect a DARC S12(35-060800) to a AC servomotor(HD142e6-130, 35161701).The cable part number are:70-25060070-251500

—> Purchase or Repair:

#FFS-Messkarte by aslam hassan vk on 2021-11-01 19:01

Hello, I am inquiring about FFS-Messkarte KYH00-FFS-MESSKARTE, which is an Interface Unit. My client is experiencing some issues with it and would like to get more information on the repairs needed. Can you please provide details on the services you offer for this specific part? Thank you.

#Firetrol by PHIL RUSH on 2016-01-15 21:00

NEED TO GET PRICING AND AVAILABILITY ON THESE CHARGERS. wE HAVE A CHEMICAL COMPANY THAT IS IN NEED ASAP!!!!THANKS,PHIL

—> Purchase or Repair:

#Futaba by Samuela Volau on 2011-07-13 21:24

Hello, I am interested in purchasing the Futaba PCG-011 E4305502001 AC servo driver pulscale. Could you please provide information on pricing and availability? I am looking to source this unit urgently. Thank you!

—> Purchase or Repair:

#Firetrol by Steven Kwok on 2010-10-11 07:34

want to inquiry an quotation with Battery charger.AS-2001H;200AH capacity;; Manufacture :Firetrol ,QTY:4 EA Please offer your price ASAP. Thanks or please provide the email address of your correct contact person to us! Thanks and Best regards ¹ù´Ó¸¦ Steven Kwok ÉîÛÚÊÐÖÐçù»úÐµ°²È«Éè±¸ÓÐÏ…Purchase or Repair:

#Foxboro/Jordan by Randy Van Wyngarden on 2005-06-28 17:29

I need to purchase a rotary poisition sensor make by Foxboro/Jordan. Model # PF1010 Code # 1010-.25 Do you have know where I can purchase one? It is nothing more than a potentiometer mounted in an explosion proof housing and geared so .25 turns of the input shaft turns the pot 340 degrees.

#Fanuc by mypiko on 2017-01-15 00:38

The Spindle Module on Fanuc A06B-6111-H002#550 failed mid-shift. Needs attention ASAP.

—> Purchase or Repair:

#Formax by Willie Downey on 2022-12-01 00:00

Machine Issue Formax c34692 not powering on despite multiple attempts.

—> Purchase or Repair:

#Firetrol by LAFENDRI on 2011-08-10 03:05

Please quote your price for the following itemsBATTERY CHARGER MANUFACTURE:FIRETROL, 24VDC,BATTERY CHARGER MODEL:KAS-2001-003, FTA1100-EN 24N,C/W TRANSFORMER AND CABLELEAD CONTROLLER QTY: 4EaDimensi and weight ..?For you prompt reply willbe appreciated

—> Purchase or Repair:

#Ferrcontrol by Clanton on 2016-06-01 03:22

Hi, I'm reaching out on behalf of a client who needs assistance with a Ferrcontrol S04-00-2Q 675 Darc Card. Can you please provide more information on potential repairs or replacement options? Thank you.

—> Purchase or Repair:

#Firetrol by Hamed mohtarami on 2012-05-01 12:27

Please send us price and delivery time for one set of above type of battery chargey .best regard MOHTARAMI

—> Purchase or Repair:

#FANUC LTD by Tyler Reynolds on 2014-07-16 22:00

The unit AO6B-6072-H322#0003 ES3Z00027 B that you mentioned appears to be a SPINDLE DRIVE. It's not fully certain as I'm new, but this is what I was told.

—> Purchase or Repair:

#Firetrol by Mohammad Naseem on 2012-02-12 15:14

Sowing 17.4 dc volt and alarm high battery voltage

—> Purchase or Repair:

#FANUC LTD by Yeung on 2014-04-04 06:29

Hey team, the FANUC LTD AO6B-6072-H322#0003 ES3Z00027 B spindle drive on one of the units went down mid-shift. Needs attention before next use. Take a look in the morning. Thanks!

—> Purchase or Repair:

#Futaba by mark hatcher on 2011-12-28 22:30

Hello, I am interested in purchasing a Futaba PCG-011 E4305502001 AC servo driver pulscale. I would like to inquire about the pricing and availability of this unit. We are trying to source one quickly for our project. Thank you.

—> Purchase or Repair:

#Fanuc by Dennis L. Brasington on 2010-01-01 08:13

My Fanuc A14B-0067-B002-01 A20B-1000-0410/03A power unit is malfunctioning, and I need it repaired quickly to avoid production delays. Looking for a reliable technician who can fix the issue efficiently. Thank you.

—> Purchase or Repair:

#Fanuc by Brian Hill on 2008-06-19 12:14

I have four of these units that need to be diagnosed and then repaired. One of them somebody plugged a connector into the wrong socket and now the screen just flickers white and then black and never boots up. Please let me know by email or at the telephone number approximately how much you charge to…Purchase or Repair:

#Ferrocontrol by Stahl on 2016-04-22 10:44

Ferrocontrol S06-00-1E IssueHi,I was informed that the Ferrocontrol S06-00-1E DC Servo Drive is not working.Thank you.

—> Purchase or Repair:

#FANUC LTD by dave swetnam on 2014-04-15 03:32

Hello, could you please provide information on repairing a FANUC LTD AO6B-6072-H322#0003 ES3Z00027 B Spindle Drive? It stopped working and we need a replacement. Thank you.

—> Purchase or Repair:

#Futaba by Essak on 2011-04-26 16:16

The Futaba PCG-011 E4305502001 unit in the shop is not working as reported.

—> Purchase or Repair:

#Furnas by sabahat on 2025-05-23 22:25

The Furnas 96JE60JA machine on our production line is experiencing a fault that is causing delays and affecting our productivity. It appears to be an internal issue that is beyond our team's capability to resolve. We need your expertise and urgent intervention to get the equipment up and running as …...
Show More

#Foxboro/Jordan by Lee McClune on 2007-07-19 18:25

I worked with Randy in yrs before retiring, now need some info, looking for self contained \'sonac\', not sure of the name, want 0-10v output, we used them in our 3M plant,,Thanks, LFM=================

#Fecken-Kirfel by Bjorn Karlsen on 2011-04-06 08:59

What is this:10:33 (1)-> SWRestart: Reboot = 0, Powerfail = 0 10:33 (2)-> SWRestart: Reboot = 0, Powerfail = 0 10:33 (2)Emergency: Data transfer card 1 - card 2 is interrupted 10:33 (2)Emergency: Data transfer card 1 - card 2 is interrupted 10:33 (1)-> PB-Status = Reboot: 0 PF: 0 HW-SN:1019 Var.: 25…...
Show More

#Firetrol by Alexey on 2017-12-01 13:39

Please help me solve the problem of the battery charger firetrol, the "fault" is on, do not charge the batteries, without voltage in the charger's output, batteries were changed a month ago and another time they are downloaded.

—> Purchase or Repair:

#Forma Scientific by Christopher J. Misseri / Polymeric Converting LLC. on 2009-05-26 18:19

Industrial Electronic Repair, We are looking for a company that can evaluate, test and repair a Forma Scientific Temperature Control Module @ a reasonable price .The Temperature Control Module part number was 231083 and is superceded by part 231883 per factory.This module fits a Forma Scientific Mod…Purchase or Repair:

#Fales by Larry Hurst on 2009-08-16 17:00

I am the maintenance director at an amusement park called worlds of fun.We are located in Kansas City Mo.I have a Fales power supply that that is bad.It is 480v to 24v dc.It is 4.5kw. sn is 0082/0113m.Would you be able to help us or have a replacement? Thanks, Larry hurst

#Frastan by Rodney Burke on 2005-06-25 20:47

Do you work on this type of winder. We just got this and can not get it started out of adjustment. Thanks

#Fg Elektronik by taiq on 2013-02-15 10:36

Please address the issue with the Fg Elektronik SNT5-20 V PSU5/4 unit

—> Purchase or Repair:

#Fire-Lite by daniel hunt on 2011-12-28 07:46

The Fire-Lite CPU-2000 15081 is not functioning properly. Maintenance team needs assistance with this Control Board unit.

—> Purchase or Repair:

#Feller Engineering by nathan newbern on 2011-07-12 00:02

IF intersted:Have DRO for replacement of spair parts.Unit came from a Major Aricraft Company sparts invitory.Looks to be in excelent condition, could be a new unit?Please call any time if intersted.Nathan817 994 4864

—> Purchase or Repair:

#Fuji by Pedro Duart on 2020-12-30 00:00

Received an urgent alert for a failed FUJI FCS-4I/O-2416P I/O CARD. Need to troubleshoot and replace it ASAP to prevent any production downtime.

—> Purchase or Repair:

#Fadis by ON OFODILE on 2007-03-12 17:13

I urgently need some quantity of a transducer for a CNC machine as follows: Manufacturer: Fadis s.p.aType/Make: Lic. Construz. Patent No 12201/16 Please send to me the unit price, shipping and other charges.

#Firetrol by Crispin Asumu Obama on 2011-05-25 15:13

I have a FIRETROL Battery charger 200Amp hour Capacity,is giving me, fast charge message all the time , i want to repair it, i don\'t know what \'s wrong , batteries or charge itself. Please , i need help on that.Thak youCrispin

—> Purchase or Repair:

#Fanuc by guru on 2022-10-10 16:51

Hey, one of the Fanuc A06B-6062-H226 servo drives just failed. Need to get in there ASAP to troubleshoot and replace it. Let's minimize downtime!

—> Purchase or Repair:

#Firetrol by mr.siwaporn palatkong on 2008-08-18 04:28

NEED YOUR ASSISTANCE TO GET MANUAL OF BATTERY CHARGER ABOVE.

—> Purchase or Repair:

#Fanuc by Juan Martinez on 2020-09-03 14:15

I am following up again regarding the Fanuc 0019420660000SX A16B-1212-0100-01 Power Supply issue. The unit is still down. We urgently need assistance to resolve this matter. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:

#Ford Power Products by Al-wakil on 2025-05-29 10:21

The Ford Power Products F8JL-12A650-LB Electronic Engine Management System experienced a critical malfunction yesterday during the afternoon shift, causing significant downtime. Could you provide a quick explanation of what went wrong and when? We need to address this issue urgently before the next …Purchase or Repair:

#Fishercontrols by Eva on 2017-11-04 20:29

Hi, can you please provide repair information for a Fisher Controls CD6201X1-EB2? Need quick assistance. Thank you.

#Futaba by RIGOBERTO BENITEZ on 2011-12-19 00:08

LEFT STICK ONLY GOES ONE WAY IT DOES NOT HAVE SPRING TO THE OTHER...... AND I WANT A REFURNISHED

—> Purchase or Repair:

#Fadal by MAGDY SOLIMAN on 2009-12-20 11:59

CE VERSION V96.1A2-3 JOG AXES TO HOME POSITION THEN ENTER THE CS COMANDNO ENTER NEXTCOMAND DISPLY ON SCREEN AND I SEE LEDS ON BOARDS ON COPUTER FLASHING BACKUP BATTERY ON CPU1400-5 IS GOOD INEED TO SLOVED PROPLEM

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.