Graseby/Goring-Kerr Service & Repair Forum

I am trying to locate an operating manual for a tek 21 dsp metal detecting device, serial no. 48796. I do have one but its in German

— Posted by Delon Ogle on 2008-01-29

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Graseby/Goring-Kerr"

If you need your Graseby/Goring-Kerr unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 85 Comments

#Graseby/Goring-Kerr by vic chiavola on 2008-06-13 15:26
I need an operating/Installation manual for a Graseby/Goreing-Kerr TEK-21 DSP Model Metal Detector.
➡️ Reply
#Graseby/Goring-Kerr by DARLENE CARTER on 2011-03-01 12:37
AM NEEDING MANUAL FOR MODEL 300 GORING-KERR. SER#17913/3tHANK YOU
➡️ Reply
#Graseby/Goring-Kerr by Dennis Dahle on 2011-07-19 15:14
Good morning we have a TEK21DSP metal detector Is there anyway I could get some information on it. It has run beautifully for years and years but there is an issue right now (there is no signal) We changed the fuses. We just don\'t know what else to do. Thank you for your help Dennis
➡️ Reply
#Graseby/Goring-Kerr by Carsten on 2009-07-14 18:52
We have recently purchased a second hand Graseby Goring-Kerr Metal Detector, model DSP2. We did not receive an operating manual with the machine. It has been inspected, so we know it is functional, but we cannot have the computer programmed without the manual.Please advise if a manual is available o…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Jose Luis Perez Contreras on 2011-11-25 19:34
Serian tan amables de venderme manual de usuario y o servicios del detector de metales Graseby/Goring-Kerr Tek DSP.Gracias por su atencion.Jose Luis Perez Contreras
➡️ Reply
#Graseby/Goring-Kerr by SWITU PATEL on 2009-04-05 05:26
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by Ron Giesbrecht on 2009-06-24 22:07
I recently bought a used GK DSP 2. Do you know where i could get an owners manual?Thanks
➡️ Reply
#Graseby/Goring-Kerr by Bushra Latif on 2008-08-13 10:49
We has a Metal Dedector of Grasbey Goring KerrModel ....DSP 2 S.no .....56928-2110 v s/phase 50 HZ Full load 0.4Akindly inform us if you have its operating and instruction manual..Thanks And Regards Bushra Latif Asian Foods Industries Ltd
➡️ Reply
#Graseby/Goring-Kerr by Mayank Agarwal on 2009-04-13 10:05
Hi, This is Mayank from India(Makson\'s Nutrition),We posses a metal detactor by you,request you to send a manual for its operation. As it is not working properly.Serial No:4833RegardsMayank00919302611867
➡️ Reply
#Graseby/Goring-Kerr by Adrian on 2009-10-08 10:22
I was wondering if you ever got a copy of this manual? I very am interested in the maintenance manual.I understand that the Anritsu KD7000 is the same machine?
➡️ Reply
#Graseby/Goring-Kerr by timothy winkelkotter on 2008-03-04 23:42
I need a operation/maintenance manuel for a Goring Kerr DSP 2 metal detector. Where can I find one?
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:38
Did you get your manual? The Tektamet has 2 main circuit boards, power supply board has 2 LED\'s on it, red and green. Is this right?
➡️ Reply
#Graseby/Goring-Kerr by Brian Large on 2009-01-21 15:54
I have a Graseby Goring Kerr metal detectorMD: 60ALINTKSer: 10531/3046I am looking for any manuals that are available for this machine.Thank you,Brian LargePacific Foods19480 SW 97th Ave.Tualatin, OR 97062503 692-9666 ext. 1417Cell 971 218-5147
➡️ Reply
#Graseby/Goring-Kerr by BEN AMEUR SAHBI on 2009-11-13 15:12
DEAR SIR , WE ASK SEND LIST PARTS OF METAL DETECTOR DSP-2 DATE 1997 /BEST REGARDS
➡️ Reply
#Graseby/Goring-Kerr by Carlos Ortiz on 2006-08-05 14:36
Hi, We need new parts TK7951ISS.F rev. 1993 Display Board and TK7950 R.F. to Digital Board. What I need to do?
➡️ Reply
#Graseby/Goring-Kerr by Ken Melech on 2008-10-23 23:24
We have recently purchased a second hand Graseby Goring-Kerr Metal Detector, model DSP2. We did not receive an operating manual with the machine. It has been inspected, so we know it is functional, but we cannot have the computer programmed without the manual.Please advise if a manual is available o…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Lisa on 2008-11-14 19:56
I need an operatin gmanual for a Graseby/Goring-Kerr DSP-2 CONTROL. Do you have one available? PLease advise.
➡️ Reply
#Graseby/Goring-Kerr by Mark on 2011-05-25 16:00
Does anybody know the special password required for the system config ?
➡️ Reply
#Graseby/Goring-Kerr by Nguyen Hung on 2008-04-21 03:17
I forgot password of DSP2, metal detectorpassword seed number:Operator: 12345678Supervisor:23456781Engineer: 34567812Service: 45678123Pls send me th passwordsBest regards
➡️ Reply
#Graseby/Goring-Kerr by John Beddard on 2011-06-21 13:58
Can you supply a contact number in the uk so that we can get one of your technical people to look at our machineType 2022Serial number 56798-3Best regardsJohn Beddard
➡️ Reply
#Graseby/Goring-Kerr by Edmundo Loyer on 2010-01-26 18:22
Dear Sirs:We own a goring metal detector but it has lost sensibility, so what I wantto know is were is the nearest place in south america that we can send itto be repaired. Thankyou in advance for your promt answer.Edmundo Loyer
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:17
Try ( Z B Z B ) for the password. This may get you into the program so you can change it.
➡️ Reply
#Graseby/Goring-Kerr by Jesus on 2010-09-09 21:31
There is a fault in a metalcheck goring kerr tek 21, the fault is \"search head\" I can\'t not enable this problem
➡️ Reply
#Graseby/Goring-Kerr by Jesus Lamas on 2010-09-10 14:17
there is a fault \"search head\" I can not enable this fault.
➡️ Reply
#Graseby/Goring-Kerr by Rupender Rana on 2009-01-08 14:10
I have a problem with machine that is with calibrationwhen calibrate it in full calibration goes okay load cell gives proper output signal but again when try to do dynamic calibration its not gives any signal or value,,nothing happen on screen turn to weigh mode its shows the fault weigh plate is no…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Todd Flood on 2008-11-20 05:53
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:41
Hi, did you locate a manual?
➡️ Reply
#Graseby/Goring-Kerr by matthew lamontagne on 2009-12-21 05:27
If you can send me a parts breakdown of dsp-2 goring kerr it will be appreciated greatly. Thanks, Matthew Lamontagne
➡️ Reply
#Graseby/Goring-Kerr by Felix Bozo on 2009-04-13 15:04
Necesito Manual de operacion del Detector para metal Graseby - Goring Kerr \"TEC DSP\"
➡️ Reply
#Graseby/Goring-Kerr by Terri Beach on 2009-03-12 14:17
I am trying to get a manufacture spec sheet on a goring kerr tek dsp
➡️ Reply
#Graseby/Goring-Kerr by John Lindquist on 2010-04-14 16:43
I need a quote (price and delivery) on the drive and idler sprockets for the mattop belt on your unit # 72CS20INT, serial # 12873/3358. They have square bores and there are 15 0f them.Thank you.
➡️ Reply
#Graseby/Goring-Kerr by serkan acar on 2009-06-26 07:16
We have 55358 serial metal dedectorsGraseby/Goring Kerr we need operation manuel and test partsBest regardsSultar Agriculture ProductsSerkan ACAR
➡️ Reply
#Graseby/Goring-Kerr by dean curbishley on 2007-07-28 15:29
we have TK7950 boards available, what frequency do you require?
➡️ Reply
#Graseby/Goring-Kerr by Delon Ogle on 2008-01-29 11:10
I am trying to locate an operating manual for a tek 21 dsp metal detecting device, serial no. 48796. I do have one but its in German
➡️ Reply
#Graseby/Goring-Kerr by Christian Torres Chilan on 2007-01-05 20:48
Good AfternoonSrs. Graseby/Goring KerrWe are the Company Farmayala. S.A. - Ecuador - Duran.We need to know and have instruction operation manual of your Graseby/Goring Kerr TEK DSP - Serial 50464Its commentaries awaiting Thanks so muchChristian Torres Chilan.Corporation Farmayala S.A.Engineer of Pro…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Frode Arntsen on 2010-01-05 09:14
HelloI need a manual for a Goring Kerr DSP2.Can you help me?Best regardsFrode
➡️ Reply
#Graseby/Goring-Kerr by Giorgio Araujo on 2008-06-23 15:46
SERIAL : 48886 We need by PDF your instruction operation manual of your Graseby/Goring Kerr TEK DSP - Serial 48 886 110 volts.Thank you in advance!!We have two units and need your operation manual asap. Preferable in Spanish. But if not, in English is fine.Sincerely,Giorgio Araujo.Miami, FLA.
➡️ Reply
#Graseby/Goring-Kerr by Dominic Patry on 2009-09-02 18:21
Hello,I\'m looking for a manual of a Graseby Goring/Kerr CDX 240 X-Ray machine. If you can sell me a copy of this manual.Thank you!
➡️ Reply
#Graseby/Goring-Kerr by RANDY P LAFORTEZA on 2011-06-16 19:46
i need a parts list for local start-stop button(the whole unit including box) for dsp3 metal detector.
➡️ Reply
#Graseby/Goring-Kerr by javier rivera on 2016-11-03 00:20
necesito comprar el manual de usuario del detector goring kerr tek dsp
➡️ Reply
#Graseby/Goring-Kerr by Jeffrey Amick on 2007-12-01 13:59
I need an operating/Installation manual for a Graseby/Goreing-Kerr TEK-DSP Model Metal Detector. There are two numbers associated with this unit, One on the digital readout (R1940607) and the other on a tag inside the metal detector head (51338-5) The unit works, but it is missing some parts. That i…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Byron Moran on 2012-11-06 15:36
DearsWe need price of metal detector with belt conveyor for cartons of frozen strawberries (-20°C) (10 kg). boxes measures are:500 mm X 500 mmThe metal detector will be at 18 °CBest regardsByron MoránSEVIND
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:33
Graseby G K no longer exists. The company that purchased them is Thermo Fisher Scientific. May be you could try that name in Poland. Good luck.
➡️ Reply
#Graseby/Goring-Kerr by Jozef Granops on 2011-03-04 11:51
Iam looking for the representative in Poland of the Graseby /Goring Kerr metaldetector Type TEK 21
➡️ Reply
#Graseby/Goring-Kerr by Suban Kotrbuppha on 2011-02-22 13:06
We need the manual of metal detector of GRASEBY GORING KERR model : TEK DSP (52528)Thank for your advance
➡️ Reply
#Graseby/Goring-Kerr by sameera abeysinghe on 2010-12-07 18:45
can you get me oparating manual of TEK21 machine.thanks.
➡️ Reply
#Graseby/Goring-Kerr by VICTOR CHANG on 2011-07-01 10:37
Dear sir : We are Corner Corporation in Taiwan. We moved our Parmasol aerosol can line to Mainland China and found problems of E-30 checkweigher as follows : 1. The reading of weiight of single product goes up and down,is unstable. 2. When trim calibraton , there were some weight reading of product …...
Show More
➡️ Reply
#Graseby/Goring-Kerr by JOHN PUCELLA on 2008-06-01 20:37
I need an operating/illustration manual for Goring Kerr metal detector with band and nuematic reject system
➡️ Reply
#Graseby/Goring-Kerr by Nasir hamalawey on 2009-07-01 06:40
i have a fault in metal detector DSP2 serial No:58464-1i need operation manual (english).i am ready to pay money for the manualThanksNasir
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:22
I don\'t know of a Model 300 unless it is a new one an Apex 300. With that number you have it sounds like an old Model called a Tektamet.
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.