Graseby/Goring-Kerr Service & Repair Forum

Srs. Graseby/Goring KerrI´m Laura Machin from Solvay pharma company. We are looking for the TSK DSP metal detector oparating manual. Maybe you can help us.Thank you.

— Posted by Laura Machin on 2009-01-13

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Graseby/Goring-Kerr"

If you need your Graseby/Goring-Kerr unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110

Recent 85 Comments

#Graseby/Goring-Kerr by mario valente on 2009-03-31 14:37
I bought a used metal detector but have no manual, can you please find and send one to me. tks, regards,
➡️ Reply
#Graseby/Goring-Kerr by Serkan ACAR on 2009-06-26 07:24
We have second hand Goring Kerr metal detector (but we dont know which model is this) with serial no 55358 Now we want to set it up for a new product,we met problems to let it learn itself because nobady here know the password it.Could you please tell me the password of each level so I can access th…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by geffery on 2008-11-14 03:23
We have one Goring Kerr DSP2 metal detector with serial no 56467-1,we didn\'t use it for a long time.Now we want to set it up for a new product,we met problems to let it learn itself because nobady here know the password it.Could you please tell me the password of each level so I can access the sett…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Orlando antillon muñoz on 2009-10-12 18:47
the reason for my post, is to ask the operations manual for our Graseby / Goring Kerr TEK DSP 21 Thanks in advance! We await your reply Sincerely: Deshidratadora Marata Chihuahua, Chihuahua. Mexico. Monday, 12 October 2009
➡️ Reply
#Graseby/Goring-Kerr by rob on 2011-06-30 17:59
Call Malcolm at DRM Weighparts on 44 (0)1527 558899 tell him Rob passed on his contact details. I n the meantime I have a few bits and pieces myself having been in th egame for a number of years e-mail me if you have any requirements I will check out what I have got.
➡️ Reply
#Graseby/Goring-Kerr by Terri Beach on 2009-03-12 14:17
I am trying to get a manufacture spec sheet on a goring kerr tek dsp
➡️ Reply
#Graseby/Goring-Kerr by Chris Grabarkievtz on 2010-01-27 17:20
My company had purchased 2 dsp2 metal detectors from an auction. We ordered the Operating and Instruction Manual. I need several parts just to get one of them working. I need the belt drive motor, a 7 pin harness from the motor to the control board, belting for the conveyor, also a wiring diagram wo…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:38
Did you get your manual? The Tektamet has 2 main circuit boards, power supply board has 2 LED\'s on it, red and green. Is this right?
➡️ Reply
#Graseby/Goring-Kerr by vic chiavola on 2008-06-13 15:26
I need an operating/Installation manual for a Graseby/Goreing-Kerr TEK-21 DSP Model Metal Detector.
➡️ Reply
#Graseby/Goring-Kerr by SWITU PATEL on 2009-04-05 05:26
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by Juan Briseno on 2008-11-04 20:21
Hello, my name is Juan Briseno and I am a seller on Ebay (OB20_2). I got a hold of the following eqipment, and I was wondering if you were interested in buying them.3 Goring kerr TK7905 power supply board2 Goring Kerr DSP 1 control panel2 Goring Kerr DSP 2 control panel3 Goring Kerr DSP 3 control pa…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Charles Fultz on 2009-03-19 15:51
I have a few Goring Kerr boards for sale. I have some xt 7905, xt 7907 and xt 8908 if anyone is interesed in them. I would be willing to sell all for around the price of one board. There are about eight boards in all. We no longer have the machines and found boards left over. Respond to cfultz@chart…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by DARLENE CARTER on 2011-03-01 12:37
AM NEEDING MANUAL FOR MODEL 300 GORING-KERR. SER#17913/3tHANK YOU
➡️ Reply
#Graseby/Goring-Kerr by Carlos Ortiz on 2006-08-05 14:36
Hi, We need new parts TK7951ISS.F rev. 1993 Display Board and TK7950 R.F. to Digital Board. What I need to do?
➡️ Reply
#Graseby/Goring-Kerr by John Beddard on 2011-06-21 13:58
Can you supply a contact number in the uk so that we can get one of your technical people to look at our machineType 2022Serial number 56798-3Best regardsJohn Beddard
➡️ Reply
#Graseby/Goring-Kerr by Cristobal Perez on 2011-04-01 00:00
In my factory, I have a metal detector Graseby/Goring-Kerr, wihich Ican not to calibrate, because I don\'t have the password.I don\'t have the manual.Please, send the manual and the password to my email.Regards
➡️ Reply
#Graseby/Goring-Kerr by Edson Soares on 2009-03-02 16:35
I Need an operating manual for a Goring kerr DSP-2 to, Please answer me.
➡️ Reply
#Graseby/Goring-Kerr by Tatjana on 2009-05-06 22:39
Hi Could you please provide us with an operational manual for Goring Kerr Tek 21 DSP.We could not locate it in the plant
➡️ Reply
#Graseby/Goring-Kerr by nazeer ahmed on 2008-09-06 08:48
WE are leading manufacturers of biscuits in pakistan. we are facing problem at one of the units of mode s7683 metal detector machine as the touch panel has turned scrambled and no menu ia thus being shown on the screen.can you please advise at earliest to resolve this fatal problem.
➡️ Reply
#Graseby/Goring-Kerr by Byron Moran on 2012-11-06 15:36
DearsWe need price of metal detector with belt conveyor for cartons of frozen strawberries (-20°C) (10 kg). boxes measures are:500 mm X 500 mmThe metal detector will be at 18 °CBest regardsByron MoránSEVIND
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:22
I don\'t know of a Model 300 unless it is a new one an Apex 300. With that number you have it sounds like an old Model called a Tektamet.
➡️ Reply
#Graseby/Goring-Kerr by Dennis Dahle on 2011-07-19 15:14
Good morning we have a TEK21DSP metal detector Is there anyway I could get some information on it. It has run beautifully for years and years but there is an issue right now (there is no signal) We changed the fuses. We just don\'t know what else to do. Thank you for your help Dennis
➡️ Reply
#Graseby/Goring-Kerr by tho on 2009-11-17 19:23
We have second hand Goring Kerr metal detector DSP 2. Now we want to set it up for a new product,we met problems to let it learn itself because nobady here know the password it.Could you please tell me the password of each level ?Seed number : service : 45678123We wish receive your answerBest regard…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:17
Try ( Z B Z B ) for the password. This may get you into the program so you can change it.
➡️ Reply
#Graseby/Goring-Kerr by Jeffrey Amick on 2007-12-01 13:59
I need an operating/Installation manual for a Graseby/Goreing-Kerr TEK-DSP Model Metal Detector. There are two numbers associated with this unit, One on the digital readout (R1940607) and the other on a tag inside the metal detector head (51338-5) The unit works, but it is missing some parts. That i…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Edson Soares on 2009-03-02 16:45
Hello Giorgio, can you help me?I need an operating manual for Metal Detector Goring Kerr DSP-2 to, you have?Please contact me.
➡️ Reply
#Graseby/Goring-Kerr by Frode Arntsen on 2010-01-05 09:14
HelloI need a manual for a Goring Kerr DSP2.Can you help me?Best regardsFrode
➡️ Reply
#Graseby/Goring-Kerr by Doug Thompson on 2012-09-06 02:59
Hi Joe, did you ever get a response to your query on this or figure it out? I currently have the same problem. Any help would be much appreciated.Kind RegardsDoug
➡️ Reply
#Graseby/Goring-Kerr by Todd Flood on 2008-11-20 05:53
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by Brian Large on 2009-01-21 15:54
I have a Graseby Goring Kerr metal detectorMD: 60ALINTKSer: 10531/3046I am looking for any manuals that are available for this machine.Thank you,Brian LargePacific Foods19480 SW 97th Ave.Tualatin, OR 97062503 692-9666 ext. 1417Cell 971 218-5147
➡️ Reply
#Graseby/Goring-Kerr by timothy winkelkotter on 2008-03-04 23:42
I need a operation/maintenance manuel for a Goring Kerr DSP 2 metal detector. Where can I find one?
➡️ Reply
#Graseby/Goring-Kerr by Nasir hamalawey on 2009-07-01 06:40
i have a fault in metal detector DSP2 serial No:58464-1i need operation manual (english).i am ready to pay money for the manualThanksNasir
➡️ Reply
#Graseby/Goring-Kerr by javier rivera on 2016-11-03 00:20
necesito comprar el manual de usuario del detector goring kerr tek dsp
➡️ Reply
#Graseby/Goring-Kerr by sachin on 2011-09-20 10:26
Dear sir,we having TEK DSP Metal detector .Please send the calibration procedure of TEK DSP metal detector.Regards,Sachin
➡️ Reply
#Graseby/Goring-Kerr by greg waters on 2010-01-23 14:02
NEED TECHNICAL MANUAL
➡️ Reply
#Graseby/Goring-Kerr by SEMRA GÜMÜÞ on 2008-08-25 13:18
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by Edmundo Loyer on 2010-01-26 18:22
Dear Sirs:We own a goring metal detector but it has lost sensibility, so what I wantto know is were is the nearest place in south america that we can send itto be repaired. Thankyou in advance for your promt answer.Edmundo Loyer
➡️ Reply
#Graseby/Goring-Kerr by BEN AMEUR SAHBI on 2009-11-13 15:12
DEAR SIR , WE ASK SEND LIST PARTS OF METAL DETECTOR DSP-2 DATE 1997 /BEST REGARDS
➡️ Reply
#Graseby/Goring-Kerr by Bushra Latif on 2008-08-13 10:49
We has a Metal Dedector of Grasbey Goring KerrModel ....DSP 2 S.no .....56928-2110 v s/phase 50 HZ Full load 0.4Akindly inform us if you have its operating and instruction manual..Thanks And Regards Bushra Latif Asian Foods Industries Ltd
➡️ Reply
#Graseby/Goring-Kerr by christian on 2011-06-15 18:56
HelloI need a manual for a Goring Kerr DSP2.Can you help me?Best regardsFrode
➡️ Reply
#Graseby/Goring-Kerr by Kornelia Degorska on 2012-09-05 10:11
I\'ve lost password of DSP2, metal detectorpassword seed number:Operator: 12345678Supervisor:23456781Engineer: 34567812Service: 45678123Please send me the passwordsBest regardsKornelia.
➡️ Reply
#Graseby/Goring-Kerr by Derek McDonald on 2009-02-05 09:39
Do you know of an agent in the UK that can assist us in locating an operating manual for our checkweigher serial# 12739707
➡️ Reply
#Graseby/Goring-Kerr by Ron Giesbrecht on 2009-06-24 22:07
I recently bought a used GK DSP 2. Do you know where i could get an owners manual?Thanks
➡️ Reply
#Graseby/Goring-Kerr by Irfan on 2009-12-29 08:17
We would like to have some technical details of Best checkweigher D30.
➡️ Reply
#Graseby/Goring-Kerr by Steve Brady on 2008-09-24 16:39
I am interested in purchasing manuals for a Greaseby/Goring Kerr metal detector. Model# DSP-2, Serial #22519, If you can help with this please respond. Thank you S. Brady
➡️ Reply
#Graseby/Goring-Kerr by Delon Ogle on 2008-01-29 11:10
I am trying to locate an operating manual for a tek 21 dsp metal detecting device, serial no. 48796. I do have one but its in German
➡️ Reply
#Graseby/Goring-Kerr by matthew lamontagne on 2009-12-21 05:27
If you can send me a parts breakdown of dsp-2 goring kerr it will be appreciated greatly. Thanks, Matthew Lamontagne
➡️ Reply
#Graseby/Goring-Kerr by Jesus on 2010-09-09 21:31
There is a fault in a metalcheck goring kerr tek 21, the fault is \"search head\" I can\'t not enable this problem
➡️ Reply
#Graseby/Goring-Kerr by Mayank Agarwal on 2009-04-13 10:05
Hi, This is Mayank from India(Makson\'s Nutrition),We posses a metal detactor by you,request you to send a manual for its operation. As it is not working properly.Serial No:4833RegardsMayank00919302611867
➡️ Reply
#Graseby/Goring-Kerr by RANDY P LAFORTEZA on 2011-06-16 19:46
i need a parts list for local start-stop button(the whole unit including box) for dsp3 metal detector.
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.