Graseby/Goring-Kerr Service & Repair Forum

HelloI need a manual for a Goring Kerr DSP2.Can you help me?Best regardsFrode

— Posted by Frode Arntsen on 2010-01-05

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Graseby/Goring-Kerr"

If you need your Graseby/Goring-Kerr unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110

Recent 85 Comments

#Graseby/Goring-Kerr by Joseph Cooney on 2019-09-25 20:49
Looking for the operational Manuals
➡️ Reply
#Graseby/Goring-Kerr by Orlando antillon muñoz on 2009-10-12 18:47
the reason for my post, is to ask the operations manual for our Graseby / Goring Kerr TEK DSP 21 Thanks in advance! We await your reply Sincerely: Deshidratadora Marata Chihuahua, Chihuahua. Mexico. Monday, 12 October 2009
➡️ Reply
#Graseby/Goring-Kerr by Frode Arntsen on 2010-01-05 09:14
HelloI need a manual for a Goring Kerr DSP2.Can you help me?Best regardsFrode
➡️ Reply
#Graseby/Goring-Kerr by BEN AMEUR SAHBI on 2009-11-13 15:12
DEAR SIR , WE ASK SEND LIST PARTS OF METAL DETECTOR DSP-2 DATE 1997 /BEST REGARDS
➡️ Reply
#Graseby/Goring-Kerr by matthew lamontagne on 2009-12-21 05:27
If you can send me a parts breakdown of dsp-2 goring kerr it will be appreciated greatly. Thanks, Matthew Lamontagne
➡️ Reply
#Graseby/Goring-Kerr by Jeffrey Amick on 2007-12-01 13:59
I need an operating/Installation manual for a Graseby/Goreing-Kerr TEK-DSP Model Metal Detector. There are two numbers associated with this unit, One on the digital readout (R1940607) and the other on a tag inside the metal detector head (51338-5) The unit works, but it is missing some parts. That i…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Tatjana on 2009-05-06 22:39
Hi Could you please provide us with an operational manual for Goring Kerr Tek 21 DSP.We could not locate it in the plant
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:38
Did you get your manual? The Tektamet has 2 main circuit boards, power supply board has 2 LED\'s on it, red and green. Is this right?
➡️ Reply
#Graseby/Goring-Kerr by sachin on 2011-09-20 10:26
Dear sir,we having TEK DSP Metal detector .Please send the calibration procedure of TEK DSP metal detector.Regards,Sachin
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:41
Hi, did you locate a manual?
➡️ Reply
#Graseby/Goring-Kerr by JOE WYNN on 2011-08-18 14:16
I HAVE A GRASEBY GORING KERR DSP 2ON THE BOARD DP7916 (THE BOARD WITH THE BATTERY) I HAVE A PL10 AND A PL11. MY QUESTION IS THE RED AND BLACK WIRE CONNECTOR, I CAN NOT REMEMBER WHICH PL TO INSERT IT INTO? tHANKS FOR YOUR HELPJOE
➡️ Reply
#Graseby/Goring-Kerr by christian on 2011-06-15 18:56
HelloI need a manual for a Goring Kerr DSP2.Can you help me?Best regardsFrode
➡️ Reply
#Graseby/Goring-Kerr by Jozef Granops on 2011-03-04 11:51
Iam looking for the representative in Poland of the Graseby /Goring Kerr metaldetector Type TEK 21
➡️ Reply
#Graseby/Goring-Kerr by Suban Kotrbuppha on 2011-02-22 13:06
We need the manual of metal detector of GRASEBY GORING KERR model : TEK DSP (52528)Thank for your advance
➡️ Reply
#Graseby/Goring-Kerr by SEMRA GÜMÜÞ on 2008-08-25 13:18
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by Isidro Servín on 2009-05-12 15:19
SERIAL : 46779 We need by PDF your instruction operation manual of our Graseby/Goring Kerr TEK DSP .21- Serial 46779Thank you in advance!!We have one units and need your operation manual asap. Preferable in Spanish. But if not, in English is fine.Sincerely,Isidro Servín.Santiago de Querétaro, Mexico…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by VICTOR CHANG on 2011-07-01 10:37
Dear sir : We are Corner Corporation in Taiwan. We moved our Parmasol aerosol can line to Mainland China and found problems of E-30 checkweigher as follows : 1. The reading of weiight of single product goes up and down,is unstable. 2. When trim calibraton , there were some weight reading of product …...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Edmundo Loyer on 2010-01-26 18:22
Dear Sirs:We own a goring metal detector but it has lost sensibility, so what I wantto know is were is the nearest place in south america that we can send itto be repaired. Thankyou in advance for your promt answer.Edmundo Loyer
➡️ Reply
#Graseby/Goring-Kerr by Melissa Frelka on 2012-06-11 18:46
I need a Goring Kerr Tek 21 manual.
➡️ Reply
#Graseby/Goring-Kerr by Rupender Rana on 2009-01-08 14:10
I have a problem with machine that is with calibrationwhen calibrate it in full calibration goes okay load cell gives proper output signal but again when try to do dynamic calibration its not gives any signal or value,,nothing happen on screen turn to weigh mode its shows the fault weigh plate is no…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Jesus Lamas on 2010-09-10 14:17
there is a fault \"search head\" I can not enable this fault.
➡️ Reply
#Graseby/Goring-Kerr by Delon Ogle on 2008-01-29 11:10
I am trying to locate an operating manual for a tek 21 dsp metal detecting device, serial no. 48796. I do have one but its in German
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:22
I don\'t know of a Model 300 unless it is a new one an Apex 300. With that number you have it sounds like an old Model called a Tektamet.
➡️ Reply
#Graseby/Goring-Kerr by mario valente on 2009-03-31 14:37
I bought a used metal detector but have no manual, can you please find and send one to me. tks, regards,
➡️ Reply
#Graseby/Goring-Kerr by Irfan on 2009-12-29 08:17
We would like to have some technical details of Best checkweigher D30.
➡️ Reply
#Graseby/Goring-Kerr by Ken Melech on 2008-10-23 23:24
We have recently purchased a second hand Graseby Goring-Kerr Metal Detector, model DSP2. We did not receive an operating manual with the machine. It has been inspected, so we know it is functional, but we cannot have the computer programmed without the manual.Please advise if a manual is available o…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:17
Try ( Z B Z B ) for the password. This may get you into the program so you can change it.
➡️ Reply
#Graseby/Goring-Kerr by Serkan ACAR on 2009-06-26 07:24
We have second hand Goring Kerr metal detector (but we dont know which model is this) with serial no 55358 Now we want to set it up for a new product,we met problems to let it learn itself because nobady here know the password it.Could you please tell me the password of each level so I can access th…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Todd Flood on 2008-11-20 05:53
We need TEK DSP MODEL OPERATING MANUEL OF GORING KERR METAL DEDECTOR
➡️ Reply
#Graseby/Goring-Kerr by nazeer ahmed on 2008-09-06 08:48
WE are leading manufacturers of biscuits in pakistan. we are facing problem at one of the units of mode s7683 metal detector machine as the touch panel has turned scrambled and no menu ia thus being shown on the screen.can you please advise at earliest to resolve this fatal problem.
➡️ Reply
#Graseby/Goring-Kerr by Carsten on 2009-07-14 18:52
We have recently purchased a second hand Graseby Goring-Kerr Metal Detector, model DSP2. We did not receive an operating manual with the machine. It has been inspected, so we know it is functional, but we cannot have the computer programmed without the manual.Please advise if a manual is available o…...
Show More
➡️ Reply
#Graseby/Goring-Kerr by Nasir hamalawey on 2009-07-01 06:40
i have a fault in metal detector DSP2 serial No:58464-1i need operation manual (english).i am ready to pay money for the manualThanksNasir
➡️ Reply
#Graseby/Goring-Kerr by Jim on 2011-04-19 20:33
Graseby G K no longer exists. The company that purchased them is Thermo Fisher Scientific. May be you could try that name in Poland. Good luck.
➡️ Reply
#Graseby/Goring-Kerr by greg waters on 2010-01-23 14:02
NEED TECHNICAL MANUAL
➡️ Reply
#Graseby/Goring-Kerr by Lisa on 2008-11-14 19:56
I need an operatin gmanual for a Graseby/Goring-Kerr DSP-2 CONTROL. Do you have one available? PLease advise.
➡️ Reply
#Graseby/Goring-Kerr by Jesus on 2010-09-09 21:31
There is a fault in a metalcheck goring kerr tek 21, the fault is \"search head\" I can\'t not enable this problem
➡️ Reply
#Graseby/Goring-Kerr by John Lindquist on 2010-04-14 16:43
I need a quote (price and delivery) on the drive and idler sprockets for the mattop belt on your unit # 72CS20INT, serial # 12873/3358. They have square bores and there are 15 0f them.Thank you.
➡️ Reply
#Graseby/Goring-Kerr by Dennis Dahle on 2011-07-19 15:14
Good morning we have a TEK21DSP metal detector Is there anyway I could get some information on it. It has run beautifully for years and years but there is an issue right now (there is no signal) We changed the fuses. We just don\'t know what else to do. Thank you for your help Dennis
➡️ Reply
#Graseby/Goring-Kerr by Nguyen Hung on 2008-04-21 03:17
I forgot password of DSP2, metal detectorpassword seed number:Operator: 12345678Supervisor:23456781Engineer: 34567812Service: 45678123Pls send me th passwordsBest regards
➡️ Reply
#Graseby/Goring-Kerr by RANDY P LAFORTEZA on 2011-06-16 19:46
i need a parts list for local start-stop button(the whole unit including box) for dsp3 metal detector.
➡️ Reply
#Graseby/Goring-Kerr by dean curbishley on 2007-07-28 15:29
we have TK7950 boards available, what frequency do you require?
➡️ Reply
#Graseby/Goring-Kerr by Adrian on 2009-10-08 10:22
I was wondering if you ever got a copy of this manual? I very am interested in the maintenance manual.I understand that the Anritsu KD7000 is the same machine?
➡️ Reply
#Graseby/Goring-Kerr by Cristobal Perez on 2011-04-01 00:00
In my factory, I have a metal detector Graseby/Goring-Kerr, wihich Ican not to calibrate, because I don\'t have the password.I don\'t have the manual.Please, send the manual and the password to my email.Regards
➡️ Reply
#Graseby/Goring-Kerr by serkan acar on 2009-06-26 07:16
We have 55358 serial metal dedectorsGraseby/Goring Kerr we need operation manuel and test partsBest regardsSultar Agriculture ProductsSerkan ACAR
➡️ Reply
#Graseby/Goring-Kerr by JOHN PUCELLA on 2008-06-01 20:37
I need an operating/illustration manual for Goring Kerr metal detector with band and nuematic reject system
➡️ Reply
#Graseby/Goring-Kerr by Edson Soares on 2009-03-02 16:45
Hello Giorgio, can you help me?I need an operating manual for Metal Detector Goring Kerr DSP-2 to, you have?Please contact me.
➡️ Reply
#Graseby/Goring-Kerr by Edson Soares on 2009-03-02 16:35
I Need an operating manual for a Goring kerr DSP-2 to, Please answer me.
➡️ Reply
#Graseby/Goring-Kerr by Steve Brady on 2008-09-24 16:39
I am interested in purchasing manuals for a Greaseby/Goring Kerr metal detector. Model# DSP-2, Serial #22519, If you can help with this please respond. Thank you S. Brady
➡️ Reply
#Graseby/Goring-Kerr by mario cardona on 2007-12-20 17:07
I have a problem with a graseby goring-ker dsp 2s, when I turned it on it makes a noise (alarm) and i can not quit this alarmI want to know if you know something about this problem because I do not have a manual to rapair this machine
➡️ Reply
#Graseby/Goring-Kerr by DARLENE CARTER on 2011-03-01 12:37
AM NEEDING MANUAL FOR MODEL 300 GORING-KERR. SER#17913/3tHANK YOU
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.