JLG Service & Repair Forum

I noticed that the DC motor controller on the JLG 7013310 631/40038 seems to have stopped working properly. It may be affecting the machine's performance but I'm not entirely sure. I recommend having a technician take a look at it to diagnose and resolve the issue.

—> Purchase or Repair: Ticket Image

— Posted by Gulsah SONMEZ on 2013-02-19

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG Smart System by Volau on 2010-09-03 04:13
Can the JLG Smart System AU3019 1600286 be repaired or replaced? Looking to check this off my to-do list.

—> Purchase or Repair:
#JLG by Sherburn on 2014-11-28 23:16
Hey, the JLG 1600286 went down mid-shift. Issue is with the controller. Please check and fix it during the day. Thanks!

—> Purchase or Repair:
#JLG by greg waters on 2008-11-10 12:10
The JLG AU3019 1600258 Smart System Controller is not working.

—> Purchase or Repair:
#JLG by mast ram on 2014-11-02 15:57
The control module for JLG AU3019, serial number 1600258, is malfunctioning and causing a halt in production. It is critical to repair or replace this module swiftly to resume operations immediately.

—> Purchase or Repair:
#JLG by Luchyk on 2013-08-08 08:32
Hello, we have a JLG Smart System 1600258 controller for an aerial work platform that has stopped working. We need a replacement but cannot find one. Can you provide repair information for this? Thank you.

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by Jamie Dougherty on 2015-04-02 07:34
The JLG AU1830 631/40038 DC Motor Controller malfunctioned mid-shift. Please have someone look into it asap.

—> Purchase or Repair:
#JLG by Larry Spleas on 2014-12-27 06:06
Hello, I'm inquiring about part number JLG AU3019 1600289 which is a Control Module. My client is experiencing issues with this part and would like to get more information on repair or replacement options. Thank you.

—> Purchase or Repair:
#JLG by Jesus Mª Matarranz Leon on 2013-07-29 03:32
Hello, I am interested in the JLG 1600286 control for the aerial work platform. I am trying to purchase this unit quickly but want to confirm if this is the right model. Could you please provide information on pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by marcus vincent on 2014-12-21 21:44
Hello, Could you please provide repair information for a JLG AU3019 Control Module (Part Number 1600258)? It stopped working and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG Smart System by MOHAMMED ALAMGIR on 2008-02-11 23:31
I need immediate assistance with the JLG Smart System AU3019 1600258 controller. The unit is still down. Please respond

—> Purchase or Repair:
#JLG by Slobodan on 2013-01-20 23:20
Hello, I'm interested in purchasing a JLG 1600286 controller. I'm not entirely sure if this is the right model, but I was advised to inquire with you. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Stoll on 2015-07-24 11:43
My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair:
#JLG by mortezazadeh on 2015-08-15 13:20
I believe the DC Motor Controller on your JLG AU1830 631/40038 may be malfunctioning, causing the machine to stop working properly. I recommend having a technician inspect and diagnose the issue to determine the best course of action for repairs. Let me know if you need further assistance. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Syed Mohammed Hussain on 2015-03-14 12:40
Hello, this is a follow-up regarding the JLG AU1830 631/40038 DC Motor Controller. The unit is still down. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Johannes on 2013-07-31 02:32
The JLG Smart System 1600258 controller for the aerial work platform has malfunctioned. Unit is currently down; needs immediate attention. Please address this issue on the next shift.

—> Purchase or Repair:
#JLG by Hui on 2015-01-06 05:41
I would like to inquire about the pricing and availability of the JLG AU1830 631/40038 DC Motor Controller. We are looking to source one quickly and would appreciate any information you can provide. Thank you.

—> Purchase or Repair:
#JLG by carlos rojas on 2014-11-01 08:57
Hello, we're seeking information regarding part number JLG AU3019 1600289, described as a Control Module. Can you provide details on potential repairs or replacements for this part? Thank you.

—> Purchase or Repair:
#JLG by kirankumar on 2014-12-23 05:06
Could you please provide repair information for a JLG AU3019 Control Module with serial number 1600258? We need to get this replaced quickly. Thank you!

—> Purchase or Repair:
#JLG by CORBESCU on 2014-12-17 18:44
Can the JLG AU3019 1600258 Control Unit be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by Lai, Cheuk Kuen on 2013-03-16 15:15
The JLG 1600286 controller in the warehouse is exhibiting unusual behavior. It is not functioning as per its normal operations.

—> Purchase or Repair:
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by Alberto Ruiz on 2014-02-18 20:12
I apologize for the inconvenience you're experiencing with your JLG AU3019 1600258 Control Unit. It seems like there might be an issue with its functionality, preventing it from operating as expected. I recommend contacting our technical support team for further assistance in diagnosing and resolvin…Purchase or Repair: Ticket Image...
Show More
#JLG by saliou ngom on 2014-12-23 04:44
The JLG 1600292 controller has failed on one of the machines drive or board issue. Need to address this ASAP to get the equipment back up and running.

—> Purchase or Repair:
#JLG by Arnie van der Est on 2015-08-03 20:20
The JLG E300AJP 1600292 is currently showing error code 1014 and is unable to articulate. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:
#JLG by Hristo Nikolov on 2014-01-04 22:31
Hello, I'm interested in purchasing a Control Module for a JLG AU3019 with the serial number 1600258. I wanted to confirm if this is the correct unit before proceeding. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Yogesh on 2016-02-03 04:15
Hi, I need assistance with the JLG AU3019 1600289 Controller. This unit caused downtime. Please provide a brief explanation of what went wrong and when it occurred. I need to address this before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by A. W. Smith Consulting on 2012-03-28 16:01
The unit that controls the equipment in our warehouse seems to be malfunctioning. It's not responding as usual and behaving erratically. Please help check and fix the issue with the JLG Smart System AU3019 controller. Thank you!

—> Purchase or Repair:
#JLG by Ing Francisco Montero Gutierrez on 2012-12-18 00:13
My JLG Smart System AU3019 controller is malfunctioning and needs repair. It's not responding properly, causing a delay in our industrial operations. Need immediate assistance to get it fixed.

—> Purchase or Repair:
#JLG by Lynn Luzzi on 2015-08-06 19:20
I'm currently facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive may not be functioning properly. Your assistance in troubleshooting and fixing this would be greatly appreciated.

—> Purchase or Repair:
#JLG by LymnWaymn on 2015-07-10 09:32
Hello, could you please provide repair info for our JLG 7013310 631/40038 DC Motor Controller that's stopped working? We need quick assistance. Thank you!

—> Purchase or Repair:
#JLG by stephen kaiteris on 2014-12-18 22:44
Hello, I am interested in purchasing the JLG control module AU3019 1600258 for my equipment. I am not 100% certain if this is the correct model, but my team suggested I reach out to inquire about pricing and availability. I need to source one quickly. Could you please provide information regarding t…Purchase or Repair: Ticket Image...
Show More
#JLG by Latsch on 2014-05-01 10:20
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.

—> Purchase or Repair:
#JLG by ravshan / I.M.Enterprises on 2014-02-14 22:58
Could you please provide information about pricing and availability for the JLG 1600258 Controller? I am looking to source one quickly and would appreciate any assistance you can provide. Thank you!

—> Purchase or Repair:
#JLG by Chinmaya on 2013-04-12 05:15
One of the drives or boards on the JLG Smart System 1600258 just failed. Need to investigate and replace ASAP to get this machine back up and running.

—> Purchase or Repair:
#JLG by Weldon Rop on 2015-08-08 19:20
The JLG AU1830 631/40038 DC Motor Controller is not working as reported.

—> Purchase or Repair:
#JLG Smart System by Grant Neeley on 2008-02-11 20:31
Hello, I'm interested in purchasing a JLG Smart System AU3019 1600258 controller. I'm not entirely sure if this is the exact model I need, but my team suggested reaching out to inquire about pricing and availability. We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by James on 2009-12-04 00:00
Experiencing motor control issues with the JLG AU3019 1600289. Need assistance from a reliable technician for repairs.

—> Purchase or Repair:
#JLG by felipe m. cruz on 2014-09-06 16:20
The JLG 1600286 controller is not responding to any commands.

—> Purchase or Repair:
#JLG by AMIT on 2015-01-11 17:41
The JLG AU3019 1600286 is down due to a Smart System drive issue. Please have someone look into it first thing in the morning.

—> Purchase or Repair:
#JLG by post on 2015-05-27 00:54
Hi, the JLG AU1830 631/40038 is displaying error code E123. Equipment is not responding to controller input. Please advise on next steps to troubleshoot and resolve the issue.

—> Purchase or Repair:
#JLG by John Casper on 2013-07-26 00:32
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.

—> Purchase or Repair:
#JLG by Svein Eirik Olsen on 2014-11-03 04:57
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.

—> Purchase or Repair:
#JLG by David Strodel on 2012-04-30 09:08
The JLG Smart System AU3019 controller is malfunctioning, causing a halt in production. We need immediate assistance to resolve this issue and get the production line back up and running. Please prioritize this repair to minimize downtime.

—> Purchase or Repair:
#JLG by petterson on 2012-12-24 16:24
The JLG Smart System AU3019 controller is displaying error code 404 and preventing the machine from powering on.

—> Purchase or Repair:
#JLG by Christian Torres Chilan on 2013-07-24 10:32
Hello, I'm reaching out about JLG part number 1600286, described as a controller. My client is experiencing an issue with it and would like to get more information on troubleshooting or repair options. Can you please provide guidance on this particular part? Thank you.

—> Purchase or Repair:
#JLG by Aaronson on 2015-03-09 05:13
The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:
#JLG by Chad Hulse on 2014-05-06 07:20
Hello, I am following up again regarding the JLG AU3019 1600289 Control Module issue. The unit is still down. Please provide an update at your earliest convenience. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.