JLG Service & Repair Forum

The JLG Smart System 1600258 is not functioning properly. Please check and repair as necessary.

—> Purchase or Repair: Ticket Image

— Posted by abdoaakl on 2013-07-18

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Kevin Marx on 2015-07-27 17:20
The JLG E300AJP 1600292 isn't working.

—> Purchase or Repair:
#JLG by Brodar on 2013-07-22 10:32
The DC motor controller (JLG 7013310 631/40038) on the line is malfunctioning, leading to significant production delays. Urgent attention and repair are needed to get operations back on track immediately.

—> Purchase or Repair:
#JLG by Debra Posey on 2012-06-13 02:06
The JLG Smart System AU3019 controller is displaying an error message and preventing the machine from functioning.

—> Purchase or Repair:
#JLG by Silvia on 2012-09-28 00:59
The JLG AU3019 1600286 is showing error code E123 and not responding to any commands. Equipment is completely unresponsive. Please advise on next steps to troubleshoot and repair.

—> Purchase or Repair:
#JLG by Frank D. Forte. on 2013-11-16 21:30
Hello,I am inquiring about a JLG part number 7013310 631/40038, described as a DC motor controller. Can you provide information on repair options for this item? Thank you.

—> Purchase or Repair:
#JLG Smart System by linda benton on 2010-07-22 21:45
JLG Smart System AU3019 1600286 not responding to any commands.

—> Purchase or Repair:
#JLG by Carlos Melo on 2013-05-17 12:54
Please provide a status update on the JLG Smart System 1600258. The unit is still down and we need assistance urgently.

—> Purchase or Repair:
#JLG Smart System by George Katinios on 2010-08-21 16:30
Hello, I am reaching out regarding JLG Smart System AU3019 1600286, an Aerial Work Platforms Controller that requires service. Can you please provide information on troubleshooting and repair options for this specific part number? Thank you.

—> Purchase or Repair:
#JLG by espindola on 2015-07-06 13:58
I'm experiencing some issues with the JLG MOS 60 D 631/40077. It seems like the DC Motor Controller is not working properly. It might be best to have a technician look into it to determine the exact problem.

—> Purchase or Repair:
#JLG by Gina King on 2012-04-23 13:21
Hello, I am following up again regarding the JLG 1600346 PROA70481 power module issue. The unit is still down. Please provide an update or resolution

—> Purchase or Repair:
#JLG by Clifford on 2019-05-02 00:00
The controller on my JLG AU3019 is unresponsive, and the equipment won't operate properly. Need an expert to diagnose and fix this issue

—> Purchase or Repair:
#JLG by Gerald Mansfield on 2013-08-07 05:32
The JLG 1600286 control for our aerial work platform is malfunctioning, inhibiting the unit's functionality. We require immediate repairs to ensure smooth operation at our worksite.

—> Purchase or Repair:
#JLG by Chiranjeevi Raju on 2012-05-03 07:18
Hello, I am interested in acquiring the JLG 1600346 PROA70481 Power Module for our equipment. Could you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#JLG by Simon on 2008-06-07 18:22
Hi, the JLG AU3019 1600258 Smart System Controller is down. Please check and repair it during the day shift. Thanks!

—> Purchase or Repair:
#JLG by V.VIJAYA on 2015-07-12 16:32
The JLG E300AJP 1600292 is down and displaying error code 4342. The articulator is not responding and the platform is not leveling properly. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
#JLG by Tien Pham on 2015-07-12 10:20
Can the Smart System drive on the JLG AU3019 1600286 be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Jlg Curtis Instruments by bllessinger on 2016-01-06 10:03
Hello, I am in need of a replacement Jlg Curtis Instruments 17400700 joystick for production. Do you have any available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by Stefanik on 2015-07-19 13:20
I am following up on my previous message regarding the JLG 7013310 631/40038 DC Motor Controller. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:
#JLG by Terry Shook on 2015-07-23 19:20
JLG MOS 60 D 631/40077 DC Motor Controller not responding, machine offline.

—> Purchase or Repair:
#JLG by SANTOS NICOLAS CELY B on 2013-05-17 13:54
The JLG 7013310 631/40038 DC motor controller experienced an issue causing downtime. Please provide details on what happened and when the incident occurred. Your

—> Purchase or Repair:
#JLG by Nikola on 2015-11-17 20:49
Please provide assistance with JLG E300AJP 1600292, an Articulator. Thank you.

—> Purchase or Repair:
#JLG by tony williams c/o ft on 2014-07-02 10:57
The JLG 1600292 controller is exhibiting unusual behavior in the warehouse unit.

—> Purchase or Repair:
#JLG by Jabes on 2015-07-27 16:20
It seems like there might be an issue with the controller on your JLG AU3019 1600258. It's not working as expected. I recommend having a professional technician take a look to diagnose the problem accurately.

—> Purchase or Repair:
#JLG by Casella on 2014-02-18 10:12
I'm sorry to hear that your JLG AU3019 1600258 Control Module is not working properly. It seems like something may have malfunctioned. It might be best to consult a professional technician for a proper diagnosis and fix.

—> Purchase or Repair:
#JLG by Stephen Warren on 2013-08-22 15:32
The JLG 1600286 control board is displaying error code E123 and the machine is not responding to any commands. Need urgent assistance to troubleshoot and resolve the issue.

—> Purchase or Repair:
#JLG by bonner on 2012-12-11 17:53
Power module failure on JLG 1600346 PROA70481, drive or board issue. Investigating further.

—> Purchase or Repair:
#JLG by Latsch on 2014-05-01 10:20
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.

—> Purchase or Repair:
#JLG by Lazaros Papazoglou on 2025-06-07 07:00
I'm currently facing an issue with the JLG 1600267 machine something seems to have stopped working. I believe it has to do with the joystick controller, but I'm uncertain about the specifics. Would appreciate assistance in diagnosing and resolving the problem.

—> Purchase or Repair:
#JLG by PRABHAKARA on 2013-08-09 01:32
Do you have a replacement control board available for JLG 1600286 to keep production running?

—> Purchase or Repair:
#JLG by DIESEL ELECTRIC on 2015-07-19 05:20
We experienced unexpected downtime with the JLG AU1830 (Serial Number 631/40038) due to issues with the DC Motor Controller. This occurred earlier today during the morning shift. Could you provide some insight before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by fabiio on 2015-08-27 22:30
Hello, I'm reaching out regarding a JLG AU1830 631/40038 DC Motor Controller that stopped working. We urgently need repair information. Can you please provide details on fixing or replacing this component? Thank you.

—> Purchase or Repair:
#JLG by Aaronson on 2015-03-09 05:13
The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:
#JLG by jawaid on 2013-02-11 07:39
Control board on JLG 1600286 just failed. Needs immediate attention.

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by BRYAN FARR on 2014-12-23 23:06
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.

—> Purchase or Repair:
#JLG by Kari on 2013-08-04 20:32
We experienced downtime with the JLG 1600286 due to a faulty control board. This caused a disruption in operations yesterday afternoon. Can you provide insight into what caused the control board failure and when we can expect it to be resolved before the next shift?

—> Purchase or Repair:
#JLG by Pakpoom on 2013-07-16 06:44
I need repair service for a JLG 7013310 631/40038 DC motor controller. It seems to be malfunctioning and impacting our operations. Thank you.

—> Purchase or Repair:
#JLG by Syed Mohammed Hussain on 2015-03-14 12:40
Hello, this is a follow-up regarding the JLG AU1830 631/40038 DC Motor Controller. The unit is still down. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by albertoli on 2013-08-12 18:35
The control board on the JLG 1600286 seems to be malfunctioning or experiencing some issues. It's causing the equipment to act up, and something has stopped working as expected. It might be best to have a technician take a look to diagnose and resolve the problem.

—> Purchase or Repair:
#JLG by Hosawi on 2014-03-25 04:30
The JLG AU3019 1600289 is down due to a faulty Control Module. Needs to be checked and replaced as soon as possible. Thanks!

—> Purchase or Repair:
#JLG by luc havelange on 2015-07-25 18:20
The JLG 7013310 631/40038 DC Motor Controller unit isn't working.

—> Purchase or Repair:
#JLG by kirankumar on 2014-12-23 05:06
Could you please provide repair information for a JLG AU3019 Control Module with serial number 1600258? We need to get this replaced quickly. Thank you!

—> Purchase or Repair:
#JLG by Mai Tuan Giang on 2013-08-21 02:32
Experiencing issues with JLG 1600286 control unit, impacting aerial work platform operations. Looking for repair service to fix the malfunction

—> Purchase or Repair:
#JLG by Ed Gutierrez on 2012-01-04 01:41
the JLG Smart System AU3019 controller for Unit 7 went down mid-shift. Please check and fix it during the day shift. Thanks!

—> Purchase or Repair:
#JLG by ENG AHMED MARZOUK on 2013-12-06 06:48
Do you have a JLG 7013310 631/40038 DC motor controller available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by nicholas bohn on 2012-02-18 06:17
Can the JLG 1600346 PROA70481 power module be repaired or purchased? I'm hoping to check this off my to-do list.

—> Purchase or Repair:
#JLG by alberto on 2014-12-31 04:54
Do you have a replacement Control Module available for JLG AU3019 1600258 to keep production running?

—> Purchase or Repair:
#JLG by Palmer on 2012-11-30 07:39
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.

—> Purchase or Repair:
#JLG by bryan on 2008-06-25 09:06
The JLG AU3019 1600258 Smart System Controller unit is not working.

—> Purchase or Repair:
#JLG by QUINONEZ on 2013-05-29 07:02
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.