JLG Service & Repair Forum

Please provide an update regarding the repair status of the JLG 7013310 631/40038 DC motor controller. It is crucial that we receive a

—> Purchase or Repair: Ticket Image

— Posted by Marin Graur on 2013-08-21

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Close on 2013-07-04 00:39
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#JLG by ray bellamy on 2015-08-12 00:20
I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern

—> Purchase or Repair:
#JLG by Questo on 2015-07-09 10:31
JLG E300AJP 1600292 showing error message "Platform Controls Fail" and not responding to any commands.

—> Purchase or Repair:
#JLG by igor vujovic on 2013-04-25 13:14
My JLG 7013310 631/40038, a DC motor controller, is malfunctioning and needs repair. Looking for a technician who can fix this industrial unit

—> Purchase or Repair:
#JLG by Robin Mohns on 2008-11-12 14:59
Hello, I'm interested in purchasing the JLG AU3019 1600258 Smart System Controller. I'd like to inquire about pricing and availability. Also, if possible, I need to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Slobodan on 2013-01-20 23:20
Hello, I'm interested in purchasing a JLG 1600286 controller. I'm not entirely sure if this is the right model, but I was advised to inquire with you. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by Grom on 2014-05-03 10:20
The control module on JLG AU3019 1600289 is behaving strangely - it is not functioning as it usually does. Please investigate the issue further.

—> Purchase or Repair:
#JLG by scott smith on 2013-02-25 10:48
We experienced downtime on unit JLG 1600286 due to a control issue for the aerial work platform. It happened during the morning shift today. Can you provide a quick update on the situation before the next shift starts?

—> Purchase or Repair:
#JLG by David VanKirk on 2014-12-24 00:44
Hello, we have a client in need of information regarding the JLG part number 59110003 1600292, described as a Power Supply. Can you please provide details on availability, pricing, and estimated repair time? Thank you.

—> Purchase or Repair:
#JLG by Heenan on 2012-04-26 10:48
The controller on my JLG AU3019 1600286 is malfunctioning, and I need it repaired

—> Purchase or Repair:
#JLG by mohammed gomaa on 2015-08-03 08:20
Hello, I'm reaching out on behalf of my client regarding an issue with JLG part number 7013310 631/40038, described as a DC Motor Controller. Could you please provide more information or assistance with this matter? Thank you.

—> Purchase or Repair:
#JLG by haidy albert on 2015-08-11 06:20
I need an update on the status of the JGL AU1830 631/40038 DC Motor Controller. The unit is still not working, and I require assistance as soon as possible. Please respond

—> Purchase or Repair:
#JLG by Valeria Sharova on 2014-12-17 19:44
Hi, we have a JLG 59110003 1600292 power supply that stopped working. Can you please provide repair info or a replacement? Your quick response is appreciated. Thanks!

—> Purchase or Repair:
#JLG by BRYAN FARR on 2014-12-23 23:06
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.

—> Purchase or Repair:
#JLG by ali ahmed ali toni on 2021-12-03 00:00
I'm having trouble with the JLG 1600292 controller. It seems like something has stopped working, but I'm not exactly sure what the issue is. Any assistance would be greatly appreciated.

—> Purchase or Repair:
#JLG by Stoll on 2015-07-24 11:43
My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair:
#JLG by gaston Petion on 2014-11-21 11:12
The Control Module on JLG AU3019 1600258 is malfunctioning, causing a production line halt. Urgent repair is needed to resume operations swiftly.

—> Purchase or Repair:
#JLG Smart System by Baig on 2008-11-29 13:47
The JLG Smart System AU3019 1600258 controller unit is not working.

—> Purchase or Repair:
#JLG by William Bacon on 2016-06-01 11:22
There's an issue with the DC Motor Controller in JLG MOS 90C 631/40234. This is affecting the production line and we need immediate repair to resume operations

—> Purchase or Repair:
#JLG by LOUIS on 2014-09-06 18:20
Hi team, I wanted to quickly report an issue with the JLG 1600286 controller. It malfunctioned yesterday at 300 PM, causing downtime on the production line. Could you please look into it and provide feedback before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by Rekman on 2013-05-02 18:50
There seems to be an issue with the JLG 1600286 Controller. Maintenance team is currently working on it.

—> Purchase or Repair:
#JLG by yang on 2012-03-21 11:32
Hi, our JLG 1600346 PROA70481 is showing error code 1234 and not powering up despite repeated attempts. We suspect a power module issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#JLG by Qualheim on 2014-12-21 11:44
just a heads up JLG 1600258 controller has crapped out. Need to fix it before next shift.

—> Purchase or Repair:
#JLG by QUINTANILLA on 2014-11-02 13:57
Hello, I am inquiring about the JLG AU3019 Control Unit with serial number 1600258. We are looking for information on whether this unit is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Khalid on 2013-02-24 22:40
Hello, I hope this message finds you well. I am reaching out regarding the JLG 1600286 control board. Our team is currently looking to locate a replacement or repair option for this unit, but we are unsure of the manufacturer since it's an older model. Could you please confirm if this unit is still …Purchase or Repair: Ticket Image...
Show More
#JLG by mano on 2013-08-19 18:32
The DC motor controller (JLG 7013310 631/40038) is exhibiting unusual behavior, not performing as it normally does. It requires further inspection to diagnose the issue accurately.

—> Purchase or Repair:
#JLG by Jonathan Tomlinson on 2015-06-22 19:12
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.

—> Purchase or Repair:
#JLG by Tanyadol on 2012-10-12 11:15
JLG AU3019 1600286 controller not responding, preventing machine operation.

—> Purchase or Repair:
#JLG by EDOZIE on 2015-03-16 18:25
I'm following up on my previous message regarding the JLG 7013310 631/40038 DC Motor Controller. The unit is still down. I need a response as soon as possible.

—> Purchase or Repair:
#JLG by Connerly on 2025-05-27 03:23
The JLG AU3019 1600289 controller is behaving abnormally in the warehouse.

—> Purchase or Repair:
#JLG by Callaghan on 2013-05-16 17:54
Can this JLG 1600286 control board be repaired or purchased? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by rosemary ortiz on 2012-09-20 22:49
I would recommend reaching out to JLG directly to inquire about support and replacement parts availability for the AU3019 Smart System Controller.

—> Purchase or Repair:
#JLG by SHANE STOCKTON on 2015-07-15 23:20
The JLG AU3019 1600286 experienced a drive or board failure in the Smart System. Diagnostics and repair are required.

—> Purchase or Repair:
#JLG by Abby on 2015-04-14 23:18
I'm experiencing an issue with the JLG AU1830 631/40038, specifically with the DC Motor Controller. It seems like something has stopped working, but I'm not sure exactly what the problem is. I would appreciate any assistance or advice you can provide to help troubleshoot and resolve this issue. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Canavan on 2015-01-12 14:41
Do you have a JLG AU3019 1600286 Smart System drive available for either repair or purchase to keep our production running?

—> Purchase or Repair:
#JLG by Sheila Del Padre on 2012-11-02 08:45
The JLG Smart System AU3019 controller in the warehouse is not functioning normally. It is exhibiting erratic behavior and not responding as expected.

—> Purchase or Repair:
#JLG by Audre Chay on 2015-08-01 13:20
Can the JLG AU3019 1600258 CONTROLER be repaired or bought? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#JLG by Strickland on 2014-05-05 20:20
Do you have a replacement JLG AU3019 1600258 Control Module available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Steven Anderson on 2014-03-25 13:30
Hello, I'm reaching out about a JLG AU3019 1600258 Control Unit that stopped working. We need a replacement ASAP but are having trouble finding one. Can you provide repair information or guide us to where we can find the part quickly? Thank you.

—> Purchase or Repair:
#JLG by Marc Mallett on 2014-03-21 19:19
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by cogley on 2013-08-16 05:32
Hey there, we're having issues with our JLG 1600286 control for the aerial work platform. We're in need of a replacement but couldn't find one. Can you please provide us with repair information or guidance on where we can get a replacement quickly? Any help would be appreciated. Thank you! —> …Purchase or Repair: Ticket Image...
Show More
#JLG by stephen kaiteris on 2014-12-18 22:44
Hello, I am interested in purchasing the JLG control module AU3019 1600258 for my equipment. I am not 100% certain if this is the correct model, but my team suggested I reach out to inquire about pricing and availability. I need to source one quickly. Could you please provide information regarding t…Purchase or Repair: Ticket Image...
Show More
#JLG by Hegyi on 2015-01-08 18:41
Experiencing issues with JLG AU3019 1600258 due to a problem with the controller. The unit went down earlier today during the morning shift. Need quick assistance before the next shift starts.

—> Purchase or Repair:
#JLG by karsana on 2013-02-17 19:49
The JLG 1600286 control unit is not working.

—> Purchase or Repair:
#JLG Smart System by sakkinen on 2008-02-04 00:33
I need assistance with my JLG Smart System AU3019 1600258 controller. Our unit is down, and I need to keep production running. Do you have one available for repair or sale?

—> Purchase or Repair:
#JLG by Felipe on 2013-08-11 08:35
Hello, my JLG Smart System 1600258 is displaying error code E450. The platform is not extending properly, and there is a constant beeping alarm. Please advise on how to resolve this issue. Thank you.

—> Purchase or Repair:
#JLG by MONTGOMERY on 2013-07-17 08:44
Experiencing issues with JLG 1600286 control board, not functioning properly. Need assistance to repair industrial unit. Thank you in advance for your help.

—> Purchase or Repair:
#JLG by roland MIRANDA on 2014-11-28 21:16
I'm experiencing an issue with the JLG 1600292 controller. It seems that something may have stopped working. I will need assistance to troubleshoot and resolve the problem.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.