JLG for Service call 1-336-969-0110 at Industrial Electronics Repair

JLG Service & Repair Forum

Hello, my JLG Smart System 1600258 is displaying error code E450. The platform is not extending properly, and there is a constant beeping alarm. Please advise on how to resolve this issue. Thank you.

—> Purchase or Repair:

— Posted by Felipe on 2013-08-11

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 491 Comments

#JLG by Maximo on 2013-02-07 15:18

The control panel on JLG 1600286 is unresponsive, preventing operators from adjusting platform height and movement. This is impacting production as work is delayed. Please prioritize this repair to minimize downtime and resume operations

—> Purchase or Repair:

#JLG by Lazar on 2015-07-22 07:20

The JLG 7013310 631/40038 DC Motor Controller is not working as reported.

—> Purchase or Repair:

#JLG by Franky on 2013-08-12 14:35

The JLG 1600286 controller malfunctioned today at 1130 AM, causing unexpected downtime. We need to address this issue

—> Purchase or Repair:

#JLG by Tom philp on 2015-08-12 13:20

The JLG MOS 60 D 631/40077 DC Motor Controller is not working.

—> Purchase or Repair:

#JLG Smart System by brusselle on 2010-11-20 08:54

Do you have a JLG Smart System AU3019 1600286 available for sale or repair? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:

#JLG by bonner on 2012-12-11 17:53

Power module failure on JLG 1600346 PROA70481, drive or board issue. Investigating further.

—> Purchase or Repair:

#JLG by Arnie van der Est on 2015-08-03 20:20

The JLG E300AJP 1600292 is currently showing error code 1014 and is unable to articulate. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:

#JLG by Suliman on 2012-02-21 08:12

I need repairs for my JLG AU3019 1600286 controller. It's not powering up when I try to operate the equipment. Need help ASAP to get it back up and running.

—> Purchase or Repair:

#JLG by nicholas kosloski on 2013-04-05 11:46

Can the JLG 7013310 631/40038 DC motor controller be repaired or purchased as a replacement? Trying to check this off my to-do list.

—> Purchase or Repair:

#JLG by George Seje on 2014-12-21 05:44

Hey! The JLG AU3019 1600258 is down. Issue seems to be with the control module. Need someone to check it out in the day shift. Thanks!

—> Purchase or Repair:

#JLG by He on 2015-08-08 20:20

The JLG AU1830 631/40038 is displaying the error code ABC123 repeatedly, and the equipment is not responding to any commands. Please advise on next steps for troubleshooting and resolving this issue

—> Purchase or Repair:

#JLG by Rob / PSI Printing on 2016-12-05 12:03

need a quick heads-up. JLG AU3019 1600289 controller issue impacting drive or board. Urgent attention needed ASAP.

—> Purchase or Repair:

#JLG by rami izhaky on 2013-05-24 15:05

JLG 1600286 controller not responding.

—> Purchase or Repair:

#JLG by Alberto Ruiz on 2014-02-18 20:12

I apologize for the inconvenience you're experiencing with your JLG AU3019 1600258 Control Unit. It seems like there might be an issue with its functionality, preventing it from operating as expected. I recommend contacting our technical support team for further assistance in diagnosing and resolvin…Purchase or Repair:

#JLG by Natarajan Subbiah on 2014-12-25 06:06

I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module is not functioning properly, causing the machine to act up. I'm unsure about the exact details of this model, but it might need some attention.

—> Purchase or Repair:

#JLG by SeekersISeek on 2013-08-17 01:01

The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:

#JLG by Connerly on 2025-05-27 03:23

The JLG AU3019 1600289 controller is behaving abnormally in the warehouse.

—> Purchase or Repair:

#JLG by charles dickson on 2013-08-10 14:32

Can this JLG 1600286 control for the aerial work platform be repaired or replaced? I am trying to check this off my to-do list. Thank you!

—> Purchase or Repair:

#JLG by saliou ngom on 2014-12-23 04:44

The JLG 1600292 controller has failed on one of the machines drive or board issue. Need to address this ASAP to get the equipment back up and running.

—> Purchase or Repair:

#JLG by SWAIN on 2013-06-11 20:43

Can this JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#JLG by Cumings on 2012-03-24 12:17

Hey, the JLG Smart System AU3019 controller is malfunctioning, halting production on the line. Need urgent repair service to address the issue immediately.

—> Purchase or Repair:

#JLG by End on 2015-03-16 19:25

JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:

#JLG by James Moore on 2012-06-19 01:42

I need assistance with JLG part number 1600346 PROA70481, described as a power module. Please provide more information regarding this component. Thank you.

—> Purchase or Repair:

#JLG by Debra Posey on 2012-06-13 02:06

The JLG Smart System AU3019 controller is displaying an error message and preventing the machine from functioning.

—> Purchase or Repair:

#JLG by Reid on 2013-10-18 10:11

The control board on JLG 1600286 is malfunctioning, causing a halt in production. Immediate repair is necessary to resume operations.

—> Purchase or Repair:

#JLG by Hristo on 2012-07-03 19:18

Hello, I am reaching out on behalf of a client who needs assistance with a JLG 1600346 PROA70481 power module. Could you please provide information on troubleshooting and repair options for this part? Thank you.

—> Purchase or Repair:

#JLG by TP SINGH on 2015-07-13 04:20

Our JLG MOS 60 D 631/40077 experienced downtime due to an issue with the DC Motor Controller. Please provide an update on what happened and when it occurred. Thank you!

—> Purchase or Repair:

#JLG by kirankumar on 2014-12-23 05:06

Could you please provide repair information for a JLG AU3019 Control Module with serial number 1600258? We need to get this replaced quickly. Thank you!

—> Purchase or Repair:

#JLG by Shahminan on 2015-03-08 21:13

The DC Motor Controller on JLG AU1830 631/40038 is malfunctioning, causing delays in production. Urgent repair service is required to get the line moving again swiftly.

—> Purchase or Repair:

#JLG by SANTOS on 2012-06-02 12:20

Hi there, we are currently on-site and in need of urgent repair information for a JLG AU3019 controller (Part Number 1600286). Could you please provide guidance on where we can purchase a replacement part? Your

—> Purchase or Repair:

#JLG by Helvie on 2013-08-16 08:32

Hello, I'm interested in purchasing the JLG 1600286 controller for a project. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:

#JLG by Aaronson on 2015-03-09 05:13

The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:

#JLG Smart System by CALGARO on 2010-07-14 05:25

Hello, I am interested in purchasing the JLG Smart System AU3019 1600286 Aerial Work Platforms Controller. I am unsure if this is the correct model, but my team recommended that I reach out to inquire. Could you please provide information on pricing and availability? I am looking to source one quick…Purchase or Repair:

#JLG by Don Wood on 2015-07-28 23:20

Hi, can the JLG MOS 60 D 631/40077 DC Motor Controller be repaired or replaced? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:

#JLG by building on 2013-08-13 00:35

The controller on JLG 1600286 is malfunctioning, causing production downtime. Urgent repair needed to minimize disruption to the line.

—> Purchase or Repair:

#JLG by Andrew Walford on 2013-08-01 14:32

The control board on JLG 1600286 is behaving abnormally. It is not responding as it typically does, and the unit is not functioning normally.

—> Purchase or Repair:

#JLG by MINGGU on 2012-03-01 22:14

the JLG 1600346 PROA70481 power module is out. Needs attention ASAP. Cheers.

—> Purchase or Repair:

#JLG by Colin Crown on 2014-07-29 11:24

The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:

#JLG Smart System by rai on 2025-06-08 15:14

The JLG Smart System AU3019 1600286 controller is displaying error code E123. Equipment is not responding to commands. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:

#JLG by Wegman on 2015-02-26 14:07

The JLG AU3019 1600258 controler is not functioning properly.

—> Purchase or Repair:

#JLG by Mario Hemond on 2014-12-05 06:23

Hello, our client is experiencing issues with their JLG 1600258 Controller. Can you please provide details on troubleshooting and repair options? Thank you.

—> Purchase or Repair:

#JLG by John Ryu on 2012-12-21 22:40

The power module unit with serial number JLG 1600346 PROA70481 is not working and needs maintenance attention.

—> Purchase or Repair:

#JLG by Fox on 2013-11-22 17:51

Hi, the JLG 1600286 controller malfunctioned earlier today, causing machine downtime from 930 AM to 1145 AM. Can you provide a quick update on the issue before the next shift comes in?

—> Purchase or Repair:

#JLG by SCIUTTO on 2014-04-05 08:29

Issue detected on JLG 1600258 controller - drive or board failure. Needs immediate attention to avoid downtime. Heading to next machine, will troubleshoot further on return.

—> Purchase or Repair:

#JLG by Yasuhiro on 2025-06-09 15:26

The JLG 1600292 is displaying error code E322. Equipment is not responding to controls and showing intermittent power loss. Need assistance troubleshooting and repairing as soon as possible. Thank you.

—> Purchase or Repair:

#JLG by NISAR on 2012-08-03 20:24

The JLG AU3019 1600286 controller is not working.

—> Purchase or Repair:

#JLG by Alsaadon on 2014-08-10 08:10

Control Module on JLG AU3019 1600258 not responding, halting all operations.

—> Purchase or Repair:

#JLG by Rafal on 2014-12-26 15:06

We still have an unresolved issue with the JLG 1600286 controller. Please provide an update or action plan

—> Purchase or Repair:

#JLG Smart System by Baig on 2008-11-29 13:47

The JLG Smart System AU3019 1600258 controller unit is not working.

—> Purchase or Repair:

#JLG by Bhupendra on 2014-05-05 03:20

Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.