JLG Service & Repair Forum
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "JLG"
- JLG → Jlg AU3019 1600258 ↗
- JLG → Jlg SMART SYSTEM AU3019 ↗
- JLG → Jlg 1600346 PROA70481 ↗
- JLG → Jlg AU3019 1600286 ↗
If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 491 Comments
The JLG Smart System AU3019 controller is displaying error code E326, preventing the machine from starting up.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, the JLG 1600286 isn't responding when attempting to raise or lower the platform. No error code is displaying, but the controls seem unresponsive. Please advise on troubleshooting steps. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I was informed that the JLG MOS 60 D 631/40077 is a DC Motor Controller unit that is currently not working.
—> Purchase or Repair:
—> Purchase or Repair:
Unit JLG 59110003 with serial number 1600292 is down due to power supply issue. Needs attention ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Need assistance with a JLG AU3019 1600286 controller. Unit not functioning properly, require repair service. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update regarding the repair status of the JLG 7013310 631/40038 DC motor controller. It is crucial that we receive a
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 control for the aerial work platform is malfunctioning and the unit went down mid-shift. Please have someone look into this issue. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The DC motor controller (JLG 7013310 631/40038) is exhibiting unusual behavior, not performing as it normally does. It requires further inspection to diagnose the issue accurately.
—> Purchase or Repair:
—> Purchase or Repair:
the JLG Smart System AU3019 controller for Unit 7 went down mid-shift. Please check and fix it during the day shift. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the JLG Smart System AU3019 controller is malfunctioning, halting production on the line. Need urgent repair service to address the issue immediately.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern
—> Purchase or Repair:
—> Purchase or Repair:
the JLG AU3019 1600289 unit went down mid-shift. Issue is with the Control Module. Need someone to check it out during the day. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
I believe the DC Motor Controller on your JLG AU1830 631/40038 may be malfunctioning, causing the machine to stop working properly. I recommend having a technician inspect and diagnose the issue to determine the best course of action for repairs. Let me know if you need further assistance. —> …Purchase or Repair: 
...
Show More
Show More
Hi there, I hope you're doing well. I'm interested in purchasing the JLG AU3019 1600258 Control Module for a unit we have. Can you please provide information on the pricing and availability? We are looking to source this part quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we have a client in need of information regarding the JLG part number 59110003 1600292, described as a Power Supply. Can you please provide details on availability, pricing, and estimated repair time? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600292 is displaying error code E322. Equipment is not responding to controls and showing intermittent power loss. Need assistance troubleshooting and repairing as soon as possible. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am representing a client who is in need of assistance with a JLG 7013310 631/40038, which is a DC motor controller. Could you please provide information on troubleshooting and repair options for this part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I need urgent assistance with JLG 1600286 control for the aerial work platform. The unit is still down. Please reply
—> Purchase or Repair:
—> Purchase or Repair:
I need help with my JLG 1600258 controller. We are looking for a replacement or repair option, but we're not sure who manufactured it. Could you please let us know if it's still supported or if parts are available for this unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm looking for assistance with a JLG AU3019 part number 1600289 described as a Control Module. Can you provide information regarding troubleshooting or potential solutions for this item? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi team, just a heads up that we experienced downtime with the JLG MOS 60 D 631/40077 (DC Motor Controller) today during our shift. Need to gather more details before the next shift comes in. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the JLG 1600286 control board went out mid-shift. Needs attention ASAP. Please check it first thing in the morning. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 DC Motor Controller malfunctioned mid-shift. Please have someone look into it asap.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 is showing error code E002 on the control board, causing the equipment to be non-operational. Please advise on troubleshooting steps or repairs needed to get it back up and running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the JLG MOS 60 D 631/40077. It seems like the DC Motor Controller is not working properly. It might be best to have a technician look into it to determine the exact problem.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.
—> Purchase or Repair:
—> Purchase or Repair:
We encountered an issue with the JLG Smart System 1600258 controller for our aerial work platform earlier today, causing downtime from 230 PM to 345 PM. Could you please provide some insights on what might have caused this malfunction? We need to have this resolved before the next shift. Thank you. …Purchase or Repair: 
...
Show More
Show More
We experienced downtime with the JLG MOS 60 D 631/40077 due to issues with the DC Motor Controller. The incident occurred today during the morning shift. Your
—> Purchase or Repair:
—> Purchase or Repair:
The controler for JLG AU3019 with serial number 1600258 is malfunctioning, affecting the production line. We need urgent repair service to resolve the issue
—> Purchase or Repair:
—> Purchase or Repair:
We are still waiting for a response regarding the JLG AU3019 1600289 controller. The unit remains inoperable. Please reply
—> Purchase or Repair:
—> Purchase or Repair:
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The DC Motor Controller on JLG AU1830 631/40038 is malfunctioning, causing delays in production. Urgent repair service is required to get the line moving again swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600289 Smart System Controller unit is malfunctioning. It is displaying unusual behavior and not operating as expected. Please provide more details about the specific issues you are observing.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the JLG 59110003 1600292 Power Supply is still supported, or if replacement parts are available for this unit? It is an older model, and our team is unsure of the manufacturer. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing the JLG 7013310 631/40038 DC Motor Controller. Can you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I have a JLG 1600286 control board that is malfunctioning and needs repair. Looking for a technician who can fix it
—> Purchase or Repair:
—> Purchase or Repair:
The Smart System Control on JLG 1600286 is malfunctioning, causing a complete halt in production. This issue needs immediate attention from your repair service to get the line up and running again as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Immediate repair is necessary to resume operations.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, the JLG AU3019 1600258 Smart System Controller is down. Please check and repair it during the day shift. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.
—> Purchase or Repair:
—> Purchase or Repair:
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 59110003 1600292 power supply unit experienced a malfunction earlier today, causing downtime on the shift. Can you provide me with a brief explanation of what went wrong and when it occurred? I need to address this issue before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with JLG AU3019 1600258 due to a problem with the controller. The unit went down earlier today during the morning shift. Need quick assistance before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, could you please provide repair information for JLG 1600286 control for aerial work platform? Our equipment is down, and we need a replacement urgently. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: