JLG Service & Repair Forum

Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.

—> Purchase or Repair: Ticket Image

— Posted by Latsch on 2014-05-01

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by SeekersISeek on 2013-08-17 01:01
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by Sherburn on 2014-11-28 23:16
Hey, the JLG 1600286 went down mid-shift. Issue is with the controller. Please check and fix it during the day. Thanks!

—> Purchase or Repair:
#JLG Smart System by linda benton on 2010-07-22 21:45
JLG Smart System AU3019 1600286 not responding to any commands.

—> Purchase or Repair:
#JLG by End on 2015-03-16 19:25
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by ray bellamy on 2015-08-12 00:20
I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern

—> Purchase or Repair:
#JLG by QUINONEZ on 2013-05-29 07:02
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.

—> Purchase or Repair:
#JLG by Cheong on 2013-03-21 12:40
Experiencing issues with my JLG 1600286 control for aerial work platform, looking for repair service as it's not functioning properly and affecting productivity on-site. Need someone reliable to fix this unit

—> Purchase or Repair:
#JLG by Natarajan Subbiah on 2014-12-25 06:06
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module is not functioning properly, causing the machine to act up. I'm unsure about the exact details of this model, but it might need some attention.

—> Purchase or Repair:
#JLG by Jonathan Albert Ocampo on 2012-12-01 08:22
Hello, please provide an update on the status of the JLG 1600346 PROA70481 power module. It is imperative that we receive a response

—> Purchase or Repair:
#JLG by greg waters on 2008-11-10 12:10
The JLG AU3019 1600258 Smart System Controller is not working.

—> Purchase or Repair:
#JLG by gomes on 2014-02-13 06:58
Do you have a JLG 1600258 controller available for sale or repair? Production is on hold and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by MOINUDDIN on 2012-08-24 11:09
There's an issue with the controller on JLG AU3019 1600286. A drive or board just failed, need to investigate and repair as soon as possible.

—> Purchase or Repair:
#JLG by JITENDRA on 2015-03-07 09:15
I was informed that the JLG MOS 60 D 631/40077 is a DC Motor Controller unit that is currently not working.

—> Purchase or Repair:
#JLG by Fox on 2013-11-22 17:51
Hi, the JLG 1600286 controller malfunctioned earlier today, causing machine downtime from 930 AM to 1145 AM. Can you provide a quick update on the issue before the next shift comes in?

—> Purchase or Repair:
#JLG by Bela on 2012-04-13 08:38
Could you please confirm if the JLG Smart System AU3019 Controller is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Larry Spleas on 2014-12-27 06:06
Hello, I'm inquiring about part number JLG AU3019 1600289 which is a Control Module. My client is experiencing issues with this part and would like to get more information on repair or replacement options. Thank you.

—> Purchase or Repair:
#JLG by James on 2009-12-04 00:00
Experiencing motor control issues with the JLG AU3019 1600289. Need assistance from a reliable technician for repairs.

—> Purchase or Repair:
#JLG by nicholas bohn on 2012-02-18 06:17
Can the JLG 1600346 PROA70481 power module be repaired or purchased? I'm hoping to check this off my to-do list.

—> Purchase or Repair:
#JLG by Bhupendra on 2014-05-05 03:20
Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by GATTI, on 2015-07-10 01:06
JLG AU3019 1600258 controller not responding to any input commands.

—> Purchase or Repair:
#JLG by Rajagopal Mahesh on 2012-06-22 01:07
The power module labeled JLG 1600346 PROA70481 is exhibiting abnormal behavior in the warehouse. It is not performing its usual functions as expected.

—> Purchase or Repair:
#JLG by Cumings on 2014-12-31 06:54
Please advise if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by Amr Salama on 2013-03-05 01:49
The JLG 7013310 631/40038 equipment is displaying error code E205. The DC motor is not responding and the equipment is unable to move. Please advise on troubleshooting steps or repairs needed to restore functionality.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by pedram on 2015-08-03 21:20
The JLG AU3019 1600258 controler is malfunctioning, causing delays in production. Please address this issue immediately to resume operations smoothly.

—> Purchase or Repair:
#JLG by Gary Mrosko on 2008-06-23 07:52
Experiencing issues with JLG AU3019 1600258 Smart System Controller. Need repair service ASAP.

—> Purchase or Repair:
#JLG by Al Moloo on 2015-07-11 17:20
We experienced downtime due to an issue with the JLG MOS 60 D 631/40077 DC Motor Controller. Can you provide insight on what happened and when it occurred before the next shift starts? Thank you.

—> Purchase or Repair:
#JLG by alberto on 2014-12-31 04:54
Do you have a replacement Control Module available for JLG AU3019 1600258 to keep production running?

—> Purchase or Repair:
#JLG by Tom Spence on 2012-09-20 02:15
The JLG AU3019 1600286 controller is not working.

—> Purchase or Repair:
#JLG by ronnie lemon on 2013-04-05 23:57
Hello, I am interested in the JLG 7013310 631/40038 DC motor controller. I would like to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Francisco Faus on 2014-12-24 05:06
the JLG AU3019 1600289 unit went down mid-shift. Issue is with the Control Module. Need someone to check it out during the day. Thanks!

—> Purchase or Repair:
#JLG by R.S.SRINVIAS on 2015-03-06 07:01
Hi there, I need repair information for a JLG AU3019 1600258 controller. Can you provide details or recommend someone who can help? Thanks!

—> Purchase or Repair:
#JLG by Sanket on 2016-11-29 22:02
I'm having trouble with the JLG AU3019 1600289 controller. Something seems to have stopped working, but I'm not exactly sure what the issue is. Could you please take a look and help me troubleshoot this problem? Thank you.

—> Purchase or Repair:
#JLG by SHANNON BRUCE on 2012-12-17 22:13
Hello, following up on the previous message regarding the JLG AU3019 1600286 Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by Cody Gillean on 2015-07-11 10:20
The JLG AU3019 1600286 is showing the error code 345. The Smart System drive is not responding, and the equipment is currently down. Please advise on next steps to troubleshoot and resolve the issue

—> Purchase or Repair:
#JLG by Scott Anctil on 2012-06-07 23:32
JLG AU3019 1600286 controller not responding.

—> Purchase or Repair:
#JLG by NISAR on 2012-08-03 20:24
The JLG AU3019 1600286 controller is not working.

—> Purchase or Repair:
#JLG by DIESEL ELECTRIC on 2015-07-19 05:20
We experienced unexpected downtime with the JLG AU1830 (Serial Number 631/40038) due to issues with the DC Motor Controller. This occurred earlier today during the morning shift. Could you provide some insight before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by madan kumar .A on 2012-02-14 19:09
The JLG 1600346 PROA70481 power module is still malfunctioning and in need of urgent attention. Please provide an update or send a technician

—> Purchase or Repair:
#JLG by rasnake on 2013-07-25 19:32
Please provide an update on the status of the JLG 1600286 control board. It is imperative that we resolve this issue

—> Purchase or Repair:
#JLG by Nooprasit on 2013-08-17 06:32
My JLG Smart System 1600258 controller is malfunctioning, and I need to find a technician who can repair it as soon as possible. The unit is not responding to any commands, causing delays in our work.

—> Purchase or Repair:
#JLG by Pakpoom on 2013-07-16 06:44
I need repair service for a JLG 7013310 631/40038 DC motor controller. It seems to be malfunctioning and impacting our operations. Thank you.

—> Purchase or Repair:
#JLG by Anhishek Agarwal on 2013-07-22 20:32
Need assistance with JLG Smart System 1600258 for an aerial work platform. The controller seems unresponsive, and we require urgent repairs. Please reach out if you can help.

—> Purchase or Repair:
#JLG by Rekman on 2013-05-02 18:50
There seems to be an issue with the JLG 1600286 Controller. Maintenance team is currently working on it.

—> Purchase or Repair:
#JLG by GERRALD on 2014-12-15 20:44
The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.

—> Purchase or Repair:
#JLG Smart System by Lieb on 2008-08-21 10:05
The JLG Smart System AU3019 1600258 controller is not working properly.

—> Purchase or Repair:
#JLG by tony williams c/o ft on 2014-07-02 10:57
The JLG 1600292 controller is exhibiting unusual behavior in the warehouse unit.

—> Purchase or Repair:
#JLG by Bodengien on 2012-09-06 03:59
Hi there, we have a JLG Smart System AU3019 controller that stopped working and we need repair info ASAP. Can you please provide repair options and availability? Thanks!

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.