JLG Service & Repair Forum

Hey, the JLG 1600286 went down mid-shift. Issue is with the controller. Please check and fix it during the day. Thanks!

—> Purchase or Repair: Ticket Image

— Posted by Sherburn on 2014-11-28

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by saillet sebastien on 2012-10-12 09:15
Please urgently provide an update on the status of the JLG 1600346 PROA70481 power module as the unit is still down. It is crucial that we have a response this time. Thank you.

—> Purchase or Repair:
#JLG Smart System by Elwin on 2010-11-13 03:34
Can the JLG Smart System AU3019 1600286 be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by K.M.MADHAN on 2012-07-25 18:59
Please provide an update on the status of the JLG 1600346 PROA70481 power module. It is still not functioning, and we require assistance immediately.

—> Purchase or Repair:
#JLG by QSM on 2015-08-08 02:20
Hello, we have a JLG MOS 60 D 631/40077 with a DC Motor Controller that stopped working. Can you provide repair info or where we can find a replacement? Thank you.

—> Purchase or Repair:
#JLG by Chung on 2015-07-25 16:20
I'm facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive is not functioning properly. I'd appreciate any help in troubleshooting this problem.

—> Purchase or Repair:
#JLG by Chlela on 2013-07-16 01:44
The JLG 1600286 controller has malfunctioned; need to replace a drive or board. Will troubleshoot thoroughly once back at the workshop.

—> Purchase or Repair:
#JLG by HMAZ on 2015-02-18 04:24
Hi there, Need repair info for JLG AU3019 1600258 controller - can you assist? Thanks!

—> Purchase or Repair:
#JLG by Sherburn on 2014-11-28 23:16
Hey, the JLG 1600286 went down mid-shift. Issue is with the controller. Please check and fix it during the day. Thanks!

—> Purchase or Repair:
#JLG by Dave McDonald on 2013-08-11 23:32
Hello, I'm reaching out on behalf of my client regarding JLG part number 1600286, which is a controller. They are experiencing some issues with it and would like to get more information on potential solutions or repairs. Thank you for your assistance.

—> Purchase or Repair:
#JLG by Rafal on 2014-12-26 15:06
We still have an unresolved issue with the JLG 1600286 controller. Please provide an update or action plan

—> Purchase or Repair:
#JLG by SANTOS NICOLAS CELY B on 2013-05-17 13:54
The JLG 7013310 631/40038 DC motor controller experienced an issue causing downtime. Please provide details on what happened and when the incident occurred. Your

—> Purchase or Repair:
#JLG by Tendam on 2014-11-03 02:57
The JLG AU3019 1600289 experienced downtime due to a faulty Control Module. This occurred on . Looking to resolve the issue

—> Purchase or Repair:
#JLG by Franky on 2013-08-12 14:35
The JLG 1600286 controller malfunctioned today at 1130 AM, causing unexpected downtime. We need to address this issue

—> Purchase or Repair:
#JLG by Salter on 2014-11-26 13:14
Could you please confirm if the JLG 59110003 1600292 Power Supply model is still supported or if replacement parts are available? We need to determine the best course of action for repair or replacement. Thank you.

—> Purchase or Repair:
#JLG by Sanket on 2016-11-29 22:02
I'm having trouble with the JLG AU3019 1600289 controller. Something seems to have stopped working, but I'm not exactly sure what the issue is. Could you please take a look and help me troubleshoot this problem? Thank you.

—> Purchase or Repair:
#JLG by DIESEL ELECTRIC on 2015-07-19 05:20
We experienced unexpected downtime with the JLG AU1830 (Serial Number 631/40038) due to issues with the DC Motor Controller. This occurred earlier today during the morning shift. Could you provide some insight before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by Jamessaw on 2014-12-26 05:27
The JLG 1600258 controller unit is not working.

—> Purchase or Repair:
#JLG by walters on 2012-09-21 18:47
Hello, I am inquiring about part number 1600286 for a JLG AU3019 controller. My client is experiencing issues with this part and may require repair or replacement. Could you provide me with more information on this component and potential solutions? Thank you.

—> Purchase or Repair:
#JLG by William Cathey on 2013-11-02 10:52
Hello, I am reaching out on behalf of a client in need of assistance with a JLG 7013310 631/40038, which is a DC motor controller. Can you please provide information on repair services or troubleshooting steps for this part? Thank you.

—> Purchase or Repair:
#JLG by David VanKirk on 2014-12-24 00:44
Hello, we have a client in need of information regarding the JLG part number 59110003 1600292, described as a Power Supply. Can you please provide details on availability, pricing, and estimated repair time? Thank you.

—> Purchase or Repair:
#JLG by igor vujovic on 2013-04-25 13:14
My JLG 7013310 631/40038, a DC motor controller, is malfunctioning and needs repair. Looking for a technician who can fix this industrial unit

—> Purchase or Repair:
#JLG by M HASSAN on 2015-01-06 02:41
The JLG E300AJP 1600292 articulator is not moving smoothly and is making strange noises while in operation.

—> Purchase or Repair:
#JLG by Tim Peel on 2015-07-22 10:20
Can you repair my JLG E300AJP 1600292 or do you have another one available for sale? Production is on hold. Thank you.

—> Purchase or Repair:
#JLG by kit on 2015-01-01 04:54
Please advise if the JLG AU3019 1600258 CONTROLER is still supported or if replacement parts are available. The unit is older, and we are uncertain about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by moss on 2014-02-12 01:58
The JLG 1600286 controller is malfunctioning, leading to critical downtime on the production line. Urgent repair is needed to ensure operations resume

—> Purchase or Repair:
#JLG by hossein yousefi on 2013-07-25 13:32
Hello, could you please provide information or assistance regarding part number JLG 1600286, described as a controller? Thank you.

—> Purchase or Repair:
#JLG by SCIUTTO on 2014-04-05 08:29
Issue detected on JLG 1600258 controller - drive or board failure. Needs immediate attention to avoid downtime. Heading to next machine, will troubleshoot further on return.

—> Purchase or Repair:
#JLG by CATHY KANALEY on 2015-08-07 16:20
We experienced downtime with the JLG MOS 60 D 631/40077 due to issues with the DC Motor Controller. The incident occurred today during the morning shift. Your

—> Purchase or Repair:
#JLG by Ashkenazi on 2012-08-03 18:24
just a heads up that the controller on JLG AU3019 1600286 seems to have failed. I'll investigate further during the next round.

—> Purchase or Repair:
#JLG by Nate on 2012-05-14 20:30
My JLG AU3019 1600286 controller is malfunctioning, and I need it fixed urgently to resume operations. Looking for a reliable repair service to address the issue

—> Purchase or Repair:
#JLG by pierre valiquette on 2013-04-14 05:31
The JLG 1600286 controller is not functioning as usual. It is exhibiting abnormal behavior that I have not witnessed before.

—> Purchase or Repair:
#JLG by Lynn Luzzi on 2015-08-06 19:20
I'm currently facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive may not be functioning properly. Your assistance in troubleshooting and fixing this would be greatly appreciated.

—> Purchase or Repair:
#JLG by Panos Doukas on 2014-12-13 00:16
Our JLG 59110003 1600292 Power Supply unit is still down. Please respond

—> Purchase or Repair:
#JLG Smart System by CALGARO on 2010-07-14 05:25
Hello, I am interested in purchasing the JLG Smart System AU3019 1600286 Aerial Work Platforms Controller. I am unsure if this is the correct model, but my team recommended that I reach out to inquire. Could you please provide information on pricing and availability? I am looking to source one quick…Purchase or Repair: Ticket Image...
Show More
#JLG by AMERICA on 2014-11-01 11:57
Hi there, I'm interested in purchasing a JLG AU3019 1600258 Control Module. I wanted to check with you about the pricing and availability as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by MEHRABAN on 2015-07-24 01:20
The JLG AU1830 631/40038, which is a DC Motor Controller, experienced a failure causing downtime. This issue occurred at leading to disruptions in operations. Please provide a quick overview of what happened before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by Kari on 2013-08-04 20:32
We experienced downtime with the JLG 1600286 due to a faulty control board. This caused a disruption in operations yesterday afternoon. Can you provide insight into what caused the control board failure and when we can expect it to be resolved before the next shift?

—> Purchase or Repair:
#JLG by karsana on 2013-02-17 19:49
The JLG 1600286 control unit is not working.

—> Purchase or Repair:
#JLG by SHEET on 2013-06-02 16:27
Please provide an update on the status of the JLG 1600286 control for the aerial work platform. It remains inoperable, and we urgently require assistance. Your

—> Purchase or Repair:
#JLG by Ron Wilson on 2015-08-09 21:20
Could you please provide details or an update on the repair status for part number AU1830 631/40038, which is a DC Motor Controller? Thank you!

—> Purchase or Repair:
#JLG by Johannes on 2013-07-31 02:32
The JLG Smart System 1600258 controller for the aerial work platform has malfunctioned. Unit is currently down; needs immediate attention. Please address this issue on the next shift.

—> Purchase or Repair:
#JLG by Heckley on 2015-07-30 15:20
I'm currently experiencing an issue with the JLG E300AJP 1600292 machine. The articulator seems to have stopped working. Your attention to this matter would be greatly appreciated.

—> Purchase or Repair:
#JLG by Fábio on 2013-04-18 12:48
The JLG 1600286 controller unit is not functioning properly. Maintenance team needs to check and possibly repair it.

—> Purchase or Repair:
#JLG by Davidiconi on 2014-03-13 12:02
The JLG 1600286 is a controller unit that is currently not functioning as expected. Please have the maintenance team check it out.

—> Purchase or Repair:
#JLG by Hosawi on 2014-03-25 04:30
The JLG AU3019 1600289 is down due to a faulty Control Module. Needs to be checked and replaced as soon as possible. Thanks!

—> Purchase or Repair:
#JLG by Alberto Ruiz on 2014-02-18 20:12
I apologize for the inconvenience you're experiencing with your JLG AU3019 1600258 Control Unit. It seems like there might be an issue with its functionality, preventing it from operating as expected. I recommend contacting our technical support team for further assistance in diagnosing and resolvin…Purchase or Repair: Ticket Image...
Show More
#JLG by Kim Hughes on 2008-01-17 10:14
Hello, I'm reaching out on behalf of my client who has a JLG AU3019 1600258 Smart System Controller that needs repair. We are looking for assistance in diagnosing and fixing the issue. Can you please provide us with more information on how we can proceed with getting this repaired? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#JLG by akram on 2014-01-03 04:00
Hello, I'm looking for assistance with a JLG AU3019 part number 1600289 described as a Control Module. Can you provide information regarding troubleshooting or potential solutions for this item? Thank you.

—> Purchase or Repair:
#JLG by Gruhl on 2013-08-18 00:32
We encountered an issue with the JLG Smart System 1600258 controller for our aerial work platform earlier today, causing downtime from 230 PM to 345 PM. Could you please provide some insights on what might have caused this malfunction? We need to have this resolved before the next shift. Thank you. …Purchase or Repair: Ticket Image...
Show More
#JLG by pasha on 2013-08-05 03:32
We have a critical issue with JLG 1600286 Controller affecting the production line. It's failing to provide necessary commands, halting our operations. Urgent repair is needed to avoid further downtime.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.