JLG Service & Repair Forum

The JLG E300AJP with serial number 1600292 is showing unusual behavior in the warehouse. It is an articulating unit that is not functioning as expected.

—> Purchase or Repair: Ticket Image

— Posted by devinder singh rawat on 2015-08-04

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Winburn on 2013-08-14 15:32
Hello, I am reaching out on behalf of a client who is in need of assistance with a JLG 1600286 controller. Could you please provide me with information on how to troubleshoot and repair this part? Thank you.

—> Purchase or Repair:
#JLG by SCIUTTO on 2014-04-05 08:29
Issue detected on JLG 1600258 controller - drive or board failure. Needs immediate attention to avoid downtime. Heading to next machine, will troubleshoot further on return.

—> Purchase or Repair:
#JLG by Harold Buckhaults on 2013-02-28 13:50
JLG Smart System 1600258 controller displaying error code E123.

—> Purchase or Repair:
#JLG by Karen Lopez on 2014-09-18 19:44
The JLG AU3019 1600258 control module is behaving erratically, displaying unusual behavior not typically observed.

—> Purchase or Repair:
#JLG by Bobby Dillard on 2013-04-12 11:15
I'm in need of a replacement JLG 1600286 controller to keep production running smoothly. Do you have any available? Thank you.

—> Purchase or Repair:
#JLG by Loretta Chadwick on 2015-07-22 06:20
Hello, I am reaching out on behalf of my client regarding an issue with a JLG MOS 60 D 631/40077 DC Motor Controller. We are in need of assistance to get this matter resolved

—> Purchase or Repair:
#JLG by George Seje on 2014-12-21 05:44
Hey! The JLG AU3019 1600258 is down. Issue seems to be with the control module. Need someone to check it out in the day shift. Thanks!

—> Purchase or Repair:
#JLG by Al or Lori Hyde on 2015-07-24 20:43
The JLG MOS 60 D 631/40077 is displaying error code 15 indicating a fault in the DC Motor Controller. The equipment is currently down, and we need immediate assistance to diagnose and resolve this issue.

—> Purchase or Repair:
#JLG by Heckley on 2015-07-30 15:20
I'm currently experiencing an issue with the JLG E300AJP 1600292 machine. The articulator seems to have stopped working. Your attention to this matter would be greatly appreciated.

—> Purchase or Repair:
#JLG by Basson on 2014-12-12 00:16
Can the JLG 1600292 controller be repaired or purchased? Checking off my to-do list.

—> Purchase or Repair:
#JLG by saillet sebastien on 2012-10-12 09:15
Please urgently provide an update on the status of the JLG 1600346 PROA70481 power module as the unit is still down. It is crucial that we have a response this time. Thank you.

—> Purchase or Repair:
#JLG by saif on 2015-07-11 07:20
Drive failure on JLG AU3019 (SN 1600286) with Smart System drive. Need urgent attention from maintenance team.

—> Purchase or Repair:
#JLG by ronnie lemon on 2013-04-05 23:57
Hello, I am interested in the JLG 7013310 631/40038 DC motor controller. I would like to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Rafael on 2015-08-05 13:20
The JLG AU1830 631/40038 DC Motor Controller is exhibiting abnormal behavior such as inconsistency in speed, sporadic movements, and unusual sounds. Further investigation is required to determine the root cause of the issue.

—> Purchase or Repair:
#JLG by girish vyas on 2016-12-14 22:56
The JLG AU3019 1600289 controller is malfunctioning, causing a halt in the production line. We need immediate repair service to address this issue and get the production moving again swiftly.

—> Purchase or Repair:
#JLG by SANTOS NICOLAS CELY B on 2013-05-17 13:54
The JLG 7013310 631/40038 DC motor controller experienced an issue causing downtime. Please provide details on what happened and when the incident occurred. Your

—> Purchase or Repair:
#JLG by kit on 2015-01-01 04:54
Please advise if the JLG AU3019 1600258 CONTROLER is still supported or if replacement parts are available. The unit is older, and we are uncertain about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by MINGGU on 2012-03-01 22:14
the JLG 1600346 PROA70481 power module is out. Needs attention ASAP. Cheers.

—> Purchase or Repair:
#JLG Smart System by Andy Bren on 2010-11-16 23:17
The unit isn't functioning, please check and troubleshoot as needed.

—> Purchase or Repair:
#JLG by Kim Hughes on 2008-01-17 10:14
Hello, I'm reaching out on behalf of my client who has a JLG AU3019 1600258 Smart System Controller that needs repair. We are looking for assistance in diagnosing and fixing the issue. Can you please provide us with more information on how we can proceed with getting this repaired? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#JLG Start System by Lemmon on 2016-03-19 21:03
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by ray bellamy on 2015-08-12 00:20
I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern

—> Purchase or Repair:
#JLG by Svein Eirik Olsen on 2014-11-03 04:57
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.

—> Purchase or Repair:
#JLG by Floy Estes on 2012-03-15 02:30
The JLG AU3019 1600286 is down - issue is with the controller. Needs attention first thing in the morning.

—> Purchase or Repair:
#JLG Smart System by sakkinen on 2008-02-04 00:33
I need assistance with my JLG Smart System AU3019 1600258 controller. Our unit is down, and I need to keep production running. Do you have one available for repair or sale?

—> Purchase or Repair:
#JLG by Taborda on 2014-07-30 07:24
Control module of JLG AU3019 1600289 is malfunctioning.

—> Purchase or Repair:
#JLG by omar rojas on 2015-07-13 14:20
We experienced downtime today due to an issue with the JLG AU3019 1600258 controller. Can you please provide some insight into what happened and when so we can address it before the next shift arrives? Thank you.

—> Purchase or Repair:
#JLG by Westcott on 2013-09-24 02:48
Can the JLG 7013310 631/40038 DC motor controller be repaired or is it better to buy a new one? Just trying to get this off my to-do list.

—> Purchase or Repair:
#JLG by End on 2015-03-16 19:25
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG Smart System by LIKUBO on 2008-03-23 10:09
Hello, I'm following up regarding the JLG Smart System controller AU3019 1600258. Can this be repaired or replaced? I'm working on checking this off my to-do list. Thank you.

—> Purchase or Repair:
#JLG by Larry Spleas on 2014-12-27 06:06
Hello, I'm inquiring about part number JLG AU3019 1600289 which is a Control Module. My client is experiencing issues with this part and would like to get more information on repair or replacement options. Thank you.

—> Purchase or Repair:
#JLG by Chad Hulse on 2014-05-06 07:20
Hello, I am following up again regarding the JLG AU3019 1600289 Control Module issue. The unit is still down. Please provide an update at your earliest convenience. Thank you.

—> Purchase or Repair:
#JLG by David Burgos on 2012-04-27 23:08
Can the JLG Smart System AU3019 Controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Solomon on 2013-08-20 23:32
We experienced downtime with JLG 7013310 631/40038, a DC motor controller. It happened earlier during this shift. Could you please provide some insight into what may have caused the issue? Thank you.

—> Purchase or Repair:
#JLG by OSA on 2015-07-29 18:20
Hi team, just a heads up that we experienced downtime with the JLG MOS 60 D 631/40077 (DC Motor Controller) today during our shift. Need to gather more details before the next shift comes in. Thanks!

—> Purchase or Repair:
#JLG by Christian Torres Chilan on 2013-07-24 10:32
Hello, I'm reaching out about JLG part number 1600286, described as a controller. My client is experiencing an issue with it and would like to get more information on troubleshooting or repair options. Can you please provide guidance on this particular part? Thank you.

—> Purchase or Repair:
#JLG by Shahminan on 2015-03-08 21:13
The DC Motor Controller on JLG AU1830 631/40038 is malfunctioning, causing delays in production. Urgent repair service is required to get the line moving again swiftly.

—> Purchase or Repair:
#JLG by SLAVOJKA STRUNJAS on 2010-05-03 00:00
Hello, I need immediate assistance regarding a JLG AU1830 631/40038 DC Motor Controller that has stopped working. We are in urgent need of repair or a replacement part. Can you please provide information on how we can resolve this issue swiftly? Thank you.

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by Bhupendra on 2014-05-05 03:20
Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Chinmaya on 2013-04-12 05:15
One of the drives or boards on the JLG Smart System 1600258 just failed. Need to investigate and replace ASAP to get this machine back up and running.

—> Purchase or Repair:
#JLG by Throngpon on 2012-05-28 16:06
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by Jonathan Albert Ocampo on 2012-12-01 08:22
Hello, please provide an update on the status of the JLG 1600346 PROA70481 power module. It is imperative that we receive a response

—> Purchase or Repair:
#JLG Smart System by VIVEK AGARWAL on 2010-08-19 15:30
Hello, I'm reaching out on behalf of my client regarding JLG Smart System AU3019 (Part Number 1600286). They are experiencing issues with the Aerial Work Platforms Controller and require assistance. Please let me know if you need any further information to help diagnose and repair the problem. Thank…Purchase or Repair: Ticket Image...
Show More
#JLG by hossein yousefi on 2013-07-25 13:32
Hello, could you please provide information or assistance regarding part number JLG 1600286, described as a controller? Thank you.

—> Purchase or Repair:
#JLG by Reid on 2013-10-18 10:11
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Immediate repair is necessary to resume operations.

—> Purchase or Repair:
#JLG Smart System by Charles Johnson on 2010-07-24 00:56
The JLG Smart System AU3019 1600286 is not working and may need attention from the maintenance team.

—> Purchase or Repair:
#JLG by Marc Mallett on 2014-03-21 19:19
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Drouillard on 2012-05-16 21:53
Hello, I'm reaching out on behalf of a client who needs assistance with a JLG 1600346 PROA70481 power module. Could you please provide information on troubleshooting and repairing this part? Thank you.

—> Purchase or Repair:
#JLG by walters on 2012-09-21 18:47
Hello, I am inquiring about part number 1600286 for a JLG AU3019 controller. My client is experiencing issues with this part and may require repair or replacement. Could you provide me with more information on this component and potential solutions? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.