JLG Service & Repair Forum

We experienced downtime with the JLG MOS 60 D 631/40077 due to issues with the DC Motor Controller. The incident occurred today during the morning shift. Your

—> Purchase or Repair: Ticket Image

— Posted by CATHY KANALEY on 2015-08-07

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by keaggy on 2012-12-27 23:33
Hello, could you please provide repair information for the JLG AU3019 Controller with serial number 1600286? It has stopped working, and we need a replacement. Thank you.

—> Purchase or Repair:
#JLG by SACHIN JOHN on 2012-03-12 11:55
The JLG Smart System AU3019 controller is malfunctioning, causing downtime on the production line. It urgently needs repair to restore operations

—> Purchase or Repair:
#JLG by Marc Poisson on 2014-10-27 07:18
Can the JLG AU3019 1600258 Control Module be repaired or purchased? I'm trying to get this checked off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Close on 2013-07-04 00:39
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#JLG by Jinwhoe on 2013-04-06 09:57
The JLG 1600286 control panel is displaying error code 452. The platform is not responding to any commands. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:
#JLG by mast ram on 2014-11-02 15:57
The control module for JLG AU3019, serial number 1600258, is malfunctioning and causing a halt in production. It is critical to repair or replace this module swiftly to resume operations immediately.

—> Purchase or Repair:
#JLG by omar rojas on 2015-07-13 14:20
We experienced downtime today due to an issue with the JLG AU3019 1600258 controller. Can you please provide some insight into what happened and when so we can address it before the next shift arrives? Thank you.

—> Purchase or Repair:
#JLG by SHANE STOCKTON on 2015-07-15 23:20
The JLG AU3019 1600286 experienced a drive or board failure in the Smart System. Diagnostics and repair are required.

—> Purchase or Repair:
#JLG by William Cathey on 2013-11-02 10:52
Hello, I am reaching out on behalf of a client in need of assistance with a JLG 7013310 631/40038, which is a DC motor controller. Can you please provide information on repair services or troubleshooting steps for this part? Thank you.

—> Purchase or Repair:
#Jlg Curtis Instruments by bllessinger on 2016-01-06 10:03
Hello, I am in need of a replacement Jlg Curtis Instruments 17400700 joystick for production. Do you have any available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by PRABHAKARA on 2013-08-09 01:32
Do you have a replacement control board available for JLG 1600286 to keep production running?

—> Purchase or Repair:
#JLG Smart System by Lieb on 2008-08-21 10:05
The JLG Smart System AU3019 1600258 controller is not working properly.

—> Purchase or Repair:
#JLG by Aurelio B. Tormes on 2013-07-18 20:55
I'm following up again regarding the JLG Smart System 1600258. The unit is still down. Please provide an update or arrange for necessary repairs immediately. Thank you.

—> Purchase or Repair:
#JLG by cogley on 2013-08-16 05:32
Hey there, we're having issues with our JLG 1600286 control for the aerial work platform. We're in need of a replacement but couldn't find one. Can you please provide us with repair information or guidance on where we can get a replacement quickly? Any help would be appreciated. Thank you! —> …Purchase or Repair: Ticket Image...
Show More
#JLG by SUMEET on 2015-07-24 21:43
Can the JLG AU1830 631/40038 DC Motor Controller be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Jonathan Albert Ocampo on 2012-12-01 08:22
Hello, please provide an update on the status of the JLG 1600346 PROA70481 power module. It is imperative that we receive a response

—> Purchase or Repair:
#JLG by Karen Hess on 2014-09-30 11:12
I need help with my JLG 1600258 controller. We are looking for a replacement or repair option, but we're not sure who manufactured it. Could you please let us know if it's still supported or if parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Heenan on 2012-04-26 10:48
The controller on my JLG AU3019 1600286 is malfunctioning, and I need it repaired

—> Purchase or Repair:
#JLG by felipe m. cruz on 2014-09-06 16:20
The JLG 1600286 controller is not responding to any commands.

—> Purchase or Repair:
#JLG by Don Wood on 2015-07-28 23:20
Hi, can the JLG MOS 60 D 631/40077 DC Motor Controller be repaired or replaced? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#JLG by Mihael on 2008-11-10 18:10
Hello, this is a follow-up regarding the JLG AU3019 1600258 Smart System Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by Mark Adam on 2014-05-07 04:20
Hi there, I'm reaching out regarding part number 1600258 for a JLG AU3019 with a description as a Control Module. Can you provide more information about this part and potential repair options? Thank you.

—> Purchase or Repair:
#JLG by saif on 2015-07-11 07:20
Drive failure on JLG AU3019 (SN 1600286) with Smart System drive. Need urgent attention from maintenance team.

—> Purchase or Repair:
#JLG by Shaji on 2014-01-18 09:45
Do you have a JLG 1600258 controller available for sale or repair? Need to keep production running, let me know, thanks.

—> Purchase or Repair:
#JLG by blannybuS on 2015-08-05 00:20
I'm reporting a downtime incident with the JLG AU3019 1600258 due to an issue with the controller. Can you provide a quick overview of what happened and when? It's crucial to address this before the next shift begins.

—> Purchase or Repair:
#JLG by Svein Eirik Olsen on 2014-11-03 04:57
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.

—> Purchase or Repair:
#JLG by Soto on 2012-02-22 03:22
The JLG AU3019 1600286 unit is still down and requires immediate attention. Please provide an update

—> Purchase or Repair:
#JLG by Karen Lopez on 2014-09-18 19:44
The JLG AU3019 1600258 control module is behaving erratically, displaying unusual behavior not typically observed.

—> Purchase or Repair:
#JLG by AMIT on 2015-01-11 17:41
The JLG AU3019 1600286 is down due to a Smart System drive issue. Please have someone look into it first thing in the morning.

—> Purchase or Repair:
#JLG by Yasuhiro on 2025-06-09 15:26
The JLG 1600292 is displaying error code E322. Equipment is not responding to controls and showing intermittent power loss. Need assistance troubleshooting and repairing as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Grom on 2014-05-03 10:20
The control module on JLG AU3019 1600289 is behaving strangely - it is not functioning as it usually does. Please investigate the issue further.

—> Purchase or Repair:
#JLG by Loretta Chadwick on 2015-07-22 06:20
Hello, I am reaching out on behalf of my client regarding an issue with a JLG MOS 60 D 631/40077 DC Motor Controller. We are in need of assistance to get this matter resolved

—> Purchase or Repair:
#JLG by julien on 2012-06-14 02:48
the JLG Smart System AU3019 controller on unit #123 went down mid-shift. Please look into it first thing in the morning to prevent any disruptions. Thanks!

—> Purchase or Repair:
#JLG by Scott Sovocool on 2012-12-05 01:44
Hi, do you have a JLG Smart System AU3019 controller available for sale or repair that we can purchase? We need it to keep production running smoothly. Thank you.

—> Purchase or Repair:
#JLG by Mohmed Salim Yusuf S on 2014-10-31 11:57
I need someone to repair the Control Module on my JLG AU3019 1600289. The industrial unit is not responding or functioning properly.

—> Purchase or Repair:
#JLG by Jesus Mª Matarranz Leon on 2013-07-29 03:32
Hello, I am interested in the JLG 1600286 control for the aerial work platform. I am trying to purchase this unit quickly but want to confirm if this is the right model. Could you please provide information on pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by LOUIS on 2014-09-06 18:20
Hi team, I wanted to quickly report an issue with the JLG 1600286 controller. It malfunctioned yesterday at 300 PM, causing downtime on the production line. Could you please look into it and provide feedback before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by David Strodel on 2012-04-30 09:08
The JLG Smart System AU3019 controller is malfunctioning, causing a halt in production. We need immediate assistance to resolve this issue and get the production line back up and running. Please prioritize this repair to minimize downtime.

—> Purchase or Repair:
#JLG by Dennis McCollums on 2012-01-17 13:45
The JLG Smart System AU3019 controller is not working.

—> Purchase or Repair:
#JLG by Salter on 2014-11-26 13:14
Could you please confirm if the JLG 59110003 1600292 Power Supply model is still supported or if replacement parts are available? We need to determine the best course of action for repair or replacement. Thank you.

—> Purchase or Repair:
#JLG by ENG AHMED MARZOUK on 2013-12-06 06:48
Do you have a JLG 7013310 631/40038 DC motor controller available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by SCIUTTO on 2014-04-05 08:29
Issue detected on JLG 1600258 controller - drive or board failure. Needs immediate attention to avoid downtime. Heading to next machine, will troubleshoot further on return.

—> Purchase or Repair:
#JLG by Garth on 2015-07-24 17:43
Hello, I'm reaching out regarding the JLG AU1830 631/40038 DC Motor Controller. We are looking for information on whether this unit is still supported or if replacement parts are available. Your assistance in identifying repair options or providing guidance on the availability of parts would be grea…Purchase or Repair: Ticket Image...
Show More
#JLG by ASHIS MANDAL on 2013-10-11 11:42
The JLG 1600286 control board is not working and needs attention.

—> Purchase or Repair:
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by scott smith on 2013-02-25 10:48
We experienced downtime on unit JLG 1600286 due to a control issue for the aerial work platform. It happened during the morning shift today. Can you provide a quick update on the situation before the next shift starts?

—> Purchase or Repair:
#JLG by mohammed gomaa on 2015-08-03 08:20
Hello, I'm reaching out on behalf of my client regarding an issue with JLG part number 7013310 631/40038, described as a DC Motor Controller. Could you please provide more information or assistance with this matter? Thank you.

—> Purchase or Repair:
#JLG by Matthew Doyle on 2014-02-20 00:12
Hello, we have a JLG 59110003 1600292 Power Supply that needs replacement. Can you provide repair information or a replacement part? Thank you.

—> Purchase or Repair:
#JLG by espindola on 2015-07-06 13:58
I'm experiencing some issues with the JLG MOS 60 D 631/40077. It seems like the DC Motor Controller is not working properly. It might be best to have a technician look into it to determine the exact problem.

—> Purchase or Repair:
#JLG by Larry Spleas on 2014-12-27 06:06
Hello, I'm inquiring about part number JLG AU3019 1600289 which is a Control Module. My client is experiencing issues with this part and would like to get more information on repair or replacement options. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.