JLG Service & Repair Forum

the JLG MOS 60 D 631/40077 DC Motor Controller on unit X went down mid-shift. Needs attention ASAP! Cheers, Night Shift Crew

—> Purchase or Repair: Ticket Image

— Posted by Greg Needham on 2015-08-09

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by md.ali hossain khan on 2013-05-14 13:48
Hi, the JLG 1600286 isn't responding when attempting to raise or lower the platform. No error code is displaying, but the controls seem unresponsive. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#JLG by blannybuS on 2015-08-05 00:20
I'm reporting a downtime incident with the JLG AU3019 1600258 due to an issue with the controller. Can you provide a quick overview of what happened and when? It's crucial to address this before the next shift begins.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by girish vyas on 2016-12-14 22:56
The JLG AU3019 1600289 controller is malfunctioning, causing a halt in the production line. We need immediate repair service to address this issue and get the production moving again swiftly.

—> Purchase or Repair:
#JLG by Winery on 2013-06-21 18:58
Hello, I am reaching out on behalf of a client who is experiencing issues with a JLG part number 1600286, described as a controller. Can you please provide information on troubleshooting steps or repair options for this specific part? Thank you.

—> Purchase or Repair:
#JLG by Rick Blankenship on 2013-04-30 13:33
Hello, I am contacting you on behalf of a client who is experiencing issues with part number JLG 1600286, which appears to be the controller. Could you please provide more information on possible repairs or replacements for this part? Thank you.

—> Purchase or Repair:
#JLG Smart System by KHAN B on 2008-01-24 01:31
The JLG Smart System AU3019 1600258 is displaying error code E203, indicating a communication fault between the controller and the main motor. Equipment is currently not responding to commands. Please advise on troubleshooting steps.

—> Purchase or Repair:
#JLG Smart System by Charles Johnson on 2010-07-24 00:56
The JLG Smart System AU3019 1600286 is not working and may need attention from the maintenance team.

—> Purchase or Repair:
#JLG by Davidiconi on 2014-03-13 12:02
The JLG 1600286 is a controller unit that is currently not functioning as expected. Please have the maintenance team check it out.

—> Purchase or Repair:
#JLG by Jacques Phillips on 2014-08-11 15:05
Hello, I'm interested in purchasing a JLG 59110003 1600292 Power Supply. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by vargas on 2014-05-05 23:20
Hello, I need repair info for a JLG 1600258 controller. It stopped working and we need a replacement. Can you provide details ASAP? Thank you.

—> Purchase or Repair:
#JLG by Kari on 2013-08-04 20:32
We experienced downtime with the JLG 1600286 due to a faulty control board. This caused a disruption in operations yesterday afternoon. Can you provide insight into what caused the control board failure and when we can expect it to be resolved before the next shift?

—> Purchase or Repair:
#JLG by Hristo on 2012-07-03 19:18
Hello, I am reaching out on behalf of a client who needs assistance with a JLG 1600346 PROA70481 power module. Could you please provide information on troubleshooting and repair options for this part? Thank you.

—> Purchase or Repair:
#JLG by Johannes on 2013-07-31 02:32
The JLG Smart System 1600258 controller for the aerial work platform has malfunctioned. Unit is currently down; needs immediate attention. Please address this issue on the next shift.

—> Purchase or Repair:
#JLG by karsana on 2013-02-17 19:49
The JLG 1600286 control unit is not working.

—> Purchase or Repair:
#JLG by Hristo Nikolov on 2014-01-04 22:31
Hello, I'm interested in purchasing a Control Module for a JLG AU3019 with the serial number 1600258. I wanted to confirm if this is the correct unit before proceeding. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Ban on 2015-07-23 16:39
I need repair for my JLG 7013310 631/40038 DC Motor Controller as it is not functioning properly. Looking for someone who can diagnose and fix the issue

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by Luchyk on 2013-08-08 08:32
Hello, we have a JLG Smart System 1600258 controller for an aerial work platform that has stopped working. We need a replacement but cannot find one. Can you provide repair information for this? Thank you.

—> Purchase or Repair:
#JLG by cogley on 2013-08-16 05:32
Hey there, we're having issues with our JLG 1600286 control for the aerial work platform. We're in need of a replacement but couldn't find one. Can you please provide us with repair information or guidance on where we can get a replacement quickly? Any help would be appreciated. Thank you! —> …Purchase or Repair: Ticket Image...
Show More
#JLG by petterson on 2012-12-24 16:24
The JLG Smart System AU3019 controller is displaying error code 404 and preventing the machine from powering on.

—> Purchase or Repair:
#JLG by Pavle on 2012-07-14 18:56
The power module on JLG 1600346 PROA70481 is malfunctioning, causing a halt in production. Urgent repair service is needed to restore operations swiftly.

—> Purchase or Repair:
It seems like there might be an issue with the DC Motor Controller in the JLG 7013310 631/40038 machine. It's not clear what the exact problem is, but something seems to have stopped working as expected. I recommend having a technician check it out to diagnose and fix the issue. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by amir reza on 2013-11-26 22:04
I'm experiencing some issues with the JLG 1600286 controller. It seems like something has stopped working, and I'm not sure what the exact problem is. Your assistance in resolving this would be greatly appreciated.

—> Purchase or Repair:
#JLG by MOINUDDIN on 2012-08-24 11:09
There's an issue with the controller on JLG AU3019 1600286. A drive or board just failed, need to investigate and repair as soon as possible.

—> Purchase or Repair:
#JLG by espindola on 2015-07-06 13:58
I'm experiencing some issues with the JLG MOS 60 D 631/40077. It seems like the DC Motor Controller is not working properly. It might be best to have a technician look into it to determine the exact problem.

—> Purchase or Repair:
#JLG by jose gonçalves on 2014-09-19 02:44
JLG 1600258 Controller is malfunctioning, causing production line downtime. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#JLG by mano on 2013-08-19 18:32
The DC motor controller (JLG 7013310 631/40038) is exhibiting unusual behavior, not performing as it normally does. It requires further inspection to diagnose the issue accurately.

—> Purchase or Repair:
#JLG by Rodney William on 2012-02-01 03:56
just a heads up that the JLG Smart System AU3019 controller went down mid-shift. Please check and troubleshoot it first thing in the morning. Thanks!

—> Purchase or Repair:
#JLG by connell on 2015-08-05 21:20
Hello, do you have a JLG AU3019 1600258 controller available for sale or repair? Our production has been affected, and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by R.S.SRINVIAS on 2015-03-06 07:01
Hi there, I need repair information for a JLG AU3019 1600258 controller. Can you provide details or recommend someone who can help? Thanks!

—> Purchase or Repair:
#JLG by M.Woollacott on 2015-08-05 09:20
JLG AU3019 1600258 controller not responding.

—> Purchase or Repair:
#JLG by donohue on 2013-01-20 22:20
One of the drives or boards on the JLG 1600286 control board just failed. Will investigate further and update.

—> Purchase or Repair:
#JLG by Swartos on 2013-08-13 05:35
I need assistance with JLG part number 1600286, which is a Controller. My client is experiencing issues with it. Please provide information on how to resolve this problem. Thank you.

—> Purchase or Repair:
#JLG by Wingo Kwok on 2012-11-24 03:28
The JLG AU3019 1600286 controller malfunctioned yesterday afternoon around 330 pm, resulting in significant downtime. Could you please provide an update on the situation before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by building on 2013-08-13 00:35
The controller on JLG 1600286 is malfunctioning, causing production downtime. Urgent repair needed to minimize disruption to the line.

—> Purchase or Repair:
#JLG by luc havelange on 2015-07-25 18:20
The JLG 7013310 631/40038 DC Motor Controller unit isn't working.

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by Tim Curran on 2013-05-10 22:45
The JLG Smart System 1600258 controller for an aerial work platform has malfunctioned and needs to be looked at immediately.

—> Purchase or Repair:
#JLG Smart System by carlos ramirez on 2008-03-21 19:53
I'm experiencing an issue with the JLG Smart System AU3019 1600258. It seems like the controller function has stopped working properly. I will need some assistance troubleshooting and fixing this problem.

—> Purchase or Repair:
#JLG by James Moore on 2012-06-19 01:42
I need assistance with JLG part number 1600346 PROA70481, described as a power module. Please provide more information regarding this component. Thank you.

—> Purchase or Repair:
#JLG by rasnake on 2013-07-25 19:32
Please provide an update on the status of the JLG 1600286 control board. It is imperative that we resolve this issue

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by Bhupendra on 2014-05-05 03:20
Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by William Jimenez on 2014-11-21 19:12
JLG AU3019 1600258 control unit not responding, machine unable to function.

—> Purchase or Repair:
#JLG by albertoli on 2013-08-12 18:35
The control board on the JLG 1600286 seems to be malfunctioning or experiencing some issues. It's causing the equipment to act up, and something has stopped working as expected. It might be best to have a technician take a look to diagnose and resolve the problem.

—> Purchase or Repair:
#JLG by Natarajan Subbiah on 2014-12-25 06:06
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module is not functioning properly, causing the machine to act up. I'm unsure about the exact details of this model, but it might need some attention.

—> Purchase or Repair:
#JLG by Kazmi on 2014-05-01 12:20
I'm currently experiencing some issues with the JLG 1600286 controller as it seems to have stopped working. Could you please have a look and see what may be causing this problem? Thank you.

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Audre Chay on 2015-08-01 13:20
Can the JLG AU3019 1600258 CONTROLER be repaired or bought? I'm looking to check this off my to-do list.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.