JLG Service & Repair Forum

I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern

—> Purchase or Repair: Ticket Image

— Posted by ray bellamy on 2015-08-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Jamil Ahmed on 2012-08-30 17:31
Controller for JLG AU3019 1600286 just failed. Need immediate diagnosis and replacement.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by Adan Martin on 2013-07-31 06:32
The machine is not functioning properly, and it seems to be related to the control board. It would be best to have a technician look into it to determine the exact issue. Thank you for bringing this to our attention.

—> Purchase or Repair:
#JLG by Ahmad Omidi on 2013-09-11 05:28
Hey, the JLG 7013310 631/40038 DC motor controller went down mid-shift. Please check it out asap tomorrow. Thanks!

—> Purchase or Repair:
#JLG by Latsch on 2014-05-01 10:20
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.

—> Purchase or Repair:
#JLG by Throngpon on 2012-05-28 16:06
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by marcus vincent on 2014-12-21 21:44
Hello, Could you please provide repair information for a JLG AU3019 Control Module (Part Number 1600258)? It stopped working and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG by Kari on 2013-08-04 20:32
We experienced downtime with the JLG 1600286 due to a faulty control board. This caused a disruption in operations yesterday afternoon. Can you provide insight into what caused the control board failure and when we can expect it to be resolved before the next shift?

—> Purchase or Repair:
#JLG by Tendam on 2014-11-03 02:57
The JLG AU3019 1600289 experienced downtime due to a faulty Control Module. This occurred on . Looking to resolve the issue

—> Purchase or Repair:
#JLG by DveriPrard on 2013-08-03 07:32
The JLG 7013310 631/40038 DC motor controller unit is displaying abnormal behavior.

—> Purchase or Repair:
#JLG by William Cathey on 2013-11-02 10:52
Hello, I am reaching out on behalf of a client in need of assistance with a JLG 7013310 631/40038, which is a DC motor controller. Can you please provide information on repair services or troubleshooting steps for this part? Thank you.

—> Purchase or Repair:
#JLG by Nikola on 2015-11-17 20:49
Please provide assistance with JLG E300AJP 1600292, an Articulator. Thank you.

—> Purchase or Repair:
#JLG by Potter on 2015-01-07 09:41
The JLG 7013310 631/40038 appears to be a DC Motor Controller that is currently not functioning.

—> Purchase or Repair:
#JLG by Loretta Chadwick on 2015-07-22 06:20
Hello, I am reaching out on behalf of my client regarding an issue with a JLG MOS 60 D 631/40077 DC Motor Controller. We are in need of assistance to get this matter resolved

—> Purchase or Repair:
#JLG by MOINUDDIN on 2012-08-24 11:09
There's an issue with the controller on JLG AU3019 1600286. A drive or board just failed, need to investigate and repair as soon as possible.

—> Purchase or Repair:
#JLG by M HASSAN on 2015-01-06 02:41
The JLG E300AJP 1600292 articulator is not moving smoothly and is making strange noises while in operation.

—> Purchase or Repair:
#JLG by shirlee caputo on 2012-08-05 02:24
Do you have a JLG AU3019 1600286 controller available for sale or repair? Production is down and we need to keep things running.

—> Purchase or Repair:
#JLG by Jamessaw on 2014-12-26 05:27
The JLG 1600258 controller unit is not working.

—> Purchase or Repair:
#JLG by Strickland on 2014-05-05 20:20
Do you have a replacement JLG AU3019 1600258 Control Module available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Jeiner Jhampier Riofrio Zapata on 2015-07-22 21:43
Hi team, the JLG AU3019 1600286 is down due to a Smart System drive issue. Needs attention ASAP. Thanks!

—> Purchase or Repair:
#JLG by End on 2015-03-16 19:25
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by Garay on 2013-08-19 01:32
The JLG Smart System 1600258 controller is malfunctioning, causing a halt in the aerial work platform production line. We need urgent repair service to address this issue

—> Purchase or Repair:
#JLG by David Burgos on 2012-04-27 23:08
Can the JLG Smart System AU3019 Controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by bagheri on 2016-02-18 10:03
I've noticed that the JLG AU3019 1600289 is having an issue with its controller. It seems like something has stopped working properly. Would you be able to take a look at it and see what might be causing the problem?

—> Purchase or Repair:
#JLG by AMERICA on 2014-11-01 11:57
Hi there, I'm interested in purchasing a JLG AU3019 1600258 Control Module. I wanted to check with you about the pricing and availability as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by McCall on 2014-05-04 19:20
Hey, the JLG 1600286 is down. Looks like an issue with the controller. Please check it out tomorrow. Thanks!

—> Purchase or Repair:
#JLG by Aurelio B. Tormes on 2013-07-18 20:55
I'm following up again regarding the JLG Smart System 1600258. The unit is still down. Please provide an update or arrange for necessary repairs immediately. Thank you.

—> Purchase or Repair:
#JLG by Canavan on 2015-01-12 14:41
Do you have a JLG AU3019 1600286 Smart System drive available for either repair or purchase to keep our production running?

—> Purchase or Repair:
#JLG by The on 2013-08-21 20:32
Please advise if the JLG 1600286 is still supported or if replacement parts are available. We are looking for a repair option for this control unit used in an older aerial work platform. Thank you.

—> Purchase or Repair:
#JLG by JOSE VALDES on 2014-11-03 03:57
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by connell on 2015-08-05 21:20
Hello, do you have a JLG AU3019 1600258 controller available for sale or repair? Our production has been affected, and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Cheri on 2013-09-12 09:28
Hey, the JLG 1600286 control board went out mid-shift. Needs attention ASAP. Please check it first thing in the morning. Thanks!

—> Purchase or Repair:
#JLG by SeekersISeek on 2013-08-17 01:01
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by Suliman on 2012-02-21 08:12
I need repairs for my JLG AU3019 1600286 controller. It's not powering up when I try to operate the equipment. Need help ASAP to get it back up and running.

—> Purchase or Repair:
#JLG Smart System by MOHAMMED ALAMGIR on 2008-02-11 23:31
I need immediate assistance with the JLG Smart System AU3019 1600258 controller. The unit is still down. Please respond

—> Purchase or Repair:
#JLG by Winery on 2013-06-21 18:58
Hello, I am reaching out on behalf of a client who is experiencing issues with a JLG part number 1600286, described as a controller. Can you please provide information on troubleshooting steps or repair options for this specific part? Thank you.

—> Purchase or Repair:
#JLG by barry lee on 2012-05-02 09:25
Do you have a JLG AU3019 1600286 controller available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by Aaronson on 2015-03-09 05:13
The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:
#JLG by moss on 2014-02-12 01:58
The JLG 1600286 controller is malfunctioning, leading to critical downtime on the production line. Urgent repair is needed to ensure operations resume

—> Purchase or Repair:
#JLG by John Vegh on 2015-01-09 19:41
Hi there, could you please provide repair info for a JLG AU1830 631/40038 DC Motor Controller? We need a replacement part urgently. Thanks!

—> Purchase or Repair:
#JLG by George Seje on 2014-12-21 05:44
Hey! The JLG AU3019 1600258 is down. Issue seems to be with the control module. Need someone to check it out in the day shift. Thanks!

—> Purchase or Repair:
#JLG by Valentin Cardona on 2014-12-05 23:23
The JLG AU3019 1600258 Control Module malfunctioned today, causing unexpected downtime for our operations. This occurred at approximately 1030 AM during the morning shift. Could you please investigate the issue and provide a quick resolution before the next shift starts? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Harold Buckhaults on 2013-02-28 13:50
JLG Smart System 1600258 controller displaying error code E123.

—> Purchase or Repair:
#JLG by elkin garces on 2014-11-02 16:57
Our JLG AU3019 1600289 Control Module is still down. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:
#JLG Smart System by Lieb on 2008-08-21 10:05
The JLG Smart System AU3019 1600258 controller is not working properly.

—> Purchase or Repair:
#JLG by reza ramezani on 2008-01-29 13:10
the JLG AU3019 1600258 Smart System Controller went down mid-shift. Needs attention ASAP. Let's troubleshoot first thing in the morning.

—> Purchase or Repair:
#JLG by Brodersen on 2014-12-23 17:44
the JLG 1600286 controller went down mid-shift. Kindly check and fix during the day. Thanks!

—> Purchase or Repair:
#JLG Smart System by George Katinios on 2010-08-21 16:30
Hello, I am reaching out regarding JLG Smart System AU3019 1600286, an Aerial Work Platforms Controller that requires service. Can you please provide information on troubleshooting and repair options for this specific part number? Thank you.

—> Purchase or Repair:
#JLG by PRABHAKARA on 2013-08-09 01:32
Do you have a replacement control board available for JLG 1600286 to keep production running?

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.