JLG Service & Repair Forum

The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!

—> Purchase or Repair: Ticket Image

— Posted by Joe Stacy on 2015-08-18

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Wegman on 2015-02-26 14:07
The JLG AU3019 1600258 controler is not functioning properly.

—> Purchase or Repair:
#JLG by Tim Peel on 2015-07-22 10:20
Can you repair my JLG E300AJP 1600292 or do you have another one available for sale? Production is on hold. Thank you.

—> Purchase or Repair:
#JLG by Seje on 2013-08-13 21:32
Control board on JLG 1600286 just went down, drive system affected. Need urgent repair.

—> Purchase or Repair:
#JLG by mano on 2013-08-19 18:32
The DC motor controller (JLG 7013310 631/40038) is exhibiting unusual behavior, not performing as it normally does. It requires further inspection to diagnose the issue accurately.

—> Purchase or Repair:
#JLG by David Strodel on 2012-04-30 09:08
The JLG Smart System AU3019 controller is malfunctioning, causing a halt in production. We need immediate assistance to resolve this issue and get the production line back up and running. Please prioritize this repair to minimize downtime.

—> Purchase or Repair:
#JLG by Colic on 2015-07-16 09:20
Hello, do you have a JLG AU3019 1600286 Smart System drive available for sale or repair? We need to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG Smart System by Andy Bren on 2010-11-16 23:17
The unit isn't functioning, please check and troubleshoot as needed.

—> Purchase or Repair:
#JLG by Amrit Pal Singh on 2013-08-22 23:32
Do you have a JLG 1600286 control board available for sale or repair? We need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by S P Kar on 2008-10-17 09:22
The JLG AU3019 1600258 Smart System Controller is not working.

—> Purchase or Repair:
#JLG by Greg Needham on 2015-08-09 17:20
the JLG MOS 60 D 631/40077 DC Motor Controller on unit X went down mid-shift. Needs attention ASAP! Cheers, Night Shift Crew

—> Purchase or Repair:
#JLG by mudgil on 2015-08-02 06:20
Hello, I'm interested in purchasing the JLG 7013310 631/40038 DC Motor Controller. Can you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#JLG by R.S.SRINVIAS on 2015-03-06 07:01
Hi there, I need repair information for a JLG AU3019 1600258 controller. Can you provide details or recommend someone who can help? Thanks!

—> Purchase or Repair:
#JLG by floyd mora on 2014-02-11 04:04
Please provide the necessary details about the JLG 1600286 Controller. We need to check if it is still supported or if parts are available for replacement or repair options. Thank you.

—> Purchase or Repair:
#JLG by fabiio on 2015-08-27 22:30
Hello, I'm reaching out regarding a JLG AU1830 631/40038 DC Motor Controller that stopped working. We urgently need repair information. Can you please provide details on fixing or replacing this component? Thank you.

—> Purchase or Repair:
#JLG by Hui on 2015-01-06 05:41
I would like to inquire about the pricing and availability of the JLG AU1830 631/40038 DC Motor Controller. We are looking to source one quickly and would appreciate any information you can provide. Thank you.

—> Purchase or Repair:
#JLG by Arvi Raud on 2013-02-07 18:18
My JLG 1600286 control panel is not responding, and we need it operational as soon as possible at our worksite. Please let me know if you can repair it

—> Purchase or Repair:
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by Vepa on 2013-06-07 18:40
Hello, I'm interested in purchasing the JLG 1600286 Controller. I'm trying to confirm if this is the correct model for our needs. Can you please provide details on the pricing and availability? We are eager to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Svein Eirik Olsen on 2014-11-03 04:57
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.

—> Purchase or Repair:
#JLG by Noah J Harrison on 2012-04-03 00:38
Experiencing issues with my JLG Smart System AU3019 controller. It is not responding to commands and seems to be malfunctioning. Looking for a technician to repair it

—> Purchase or Repair:
#JLG Smart System by carlos ramirez on 2008-03-21 19:53
I'm experiencing an issue with the JLG Smart System AU3019 1600258. It seems like the controller function has stopped working properly. I will need some assistance troubleshooting and fixing this problem.

—> Purchase or Repair:
#Jlg Curtis Instruments by bllessinger on 2016-01-06 10:03
Hello, I am in need of a replacement Jlg Curtis Instruments 17400700 joystick for production. Do you have any available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by sergio rojas on 2012-03-19 16:29
The JLG Smart System AU3019 controller is displaying error code E326, preventing the machine from starting up.

—> Purchase or Repair:
#JLG by Sherburn on 2014-11-28 23:16
Hey, the JLG 1600286 went down mid-shift. Issue is with the controller. Please check and fix it during the day. Thanks!

—> Purchase or Repair:
#JLG by bart hinesly on 2013-05-11 04:45
JLG 1600286 controller displaying error code E355.

—> Purchase or Repair:
#JLG by A. W. Smith Consulting on 2012-03-28 16:01
The unit that controls the equipment in our warehouse seems to be malfunctioning. It's not responding as usual and behaving erratically. Please help check and fix the issue with the JLG Smart System AU3019 controller. Thank you!

—> Purchase or Repair:
#JLG by Grom on 2014-05-03 10:20
The control module on JLG AU3019 1600289 is behaving strangely - it is not functioning as it usually does. Please investigate the issue further.

—> Purchase or Repair:
#JLG by yang on 2012-03-21 11:32
Hi, our JLG 1600346 PROA70481 is showing error code 1234 and not powering up despite repeated attempts. We suspect a power module issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#JLG by Connerly on 2025-05-27 03:23
The JLG AU3019 1600289 controller is behaving abnormally in the warehouse.

—> Purchase or Repair:
#JLG by SHANE STOCKTON on 2015-07-15 23:20
The JLG AU3019 1600286 experienced a drive or board failure in the Smart System. Diagnostics and repair are required.

—> Purchase or Repair:
#JLG by Mohmed Salim Yusuf S on 2014-10-31 11:57
I need someone to repair the Control Module on my JLG AU3019 1600289. The industrial unit is not responding or functioning properly.

—> Purchase or Repair:
#JLG by BRYAN FARR on 2014-12-23 23:06
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.

—> Purchase or Repair:
#JLG by Yogesh on 2016-02-03 04:15
Hi, I need assistance with the JLG AU3019 1600289 Controller. This unit caused downtime. Please provide a brief explanation of what went wrong and when it occurred. I need to address this before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG Start System by Lemmon on 2016-03-19 21:03
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Ian Graves on 2013-11-02 01:52
The JLG 1600286 is not functioning. Please check and repair as needed.

—> Purchase or Repair:
#JLG by Abby on 2015-04-14 23:18
I'm experiencing an issue with the JLG AU1830 631/40038, specifically with the DC Motor Controller. It seems like something has stopped working, but I'm not sure exactly what the problem is. I would appreciate any assistance or advice you can provide to help troubleshoot and resolve this issue. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by LOUIS on 2014-09-06 18:20
Hi team, I wanted to quickly report an issue with the JLG 1600286 controller. It malfunctioned yesterday at 300 PM, causing downtime on the production line. Could you please look into it and provide feedback before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by Casella on 2014-02-18 10:12
I'm sorry to hear that your JLG AU3019 1600258 Control Module is not working properly. It seems like something may have malfunctioned. It might be best to consult a professional technician for a proper diagnosis and fix.

—> Purchase or Repair:
#JLG by DIESEL on 2015-07-10 07:21
The JLG E300AJP 1600292 is still down. Urgent response required.

—> Purchase or Repair:
#JLG by Compton on 2012-06-02 13:20
Need assistance with a JLG AU3019 1600286 controller. Unit not functioning properly, require repair service. Thank you.

—> Purchase or Repair:
#JLG by Cumings on 2012-03-24 12:17
Hey, the JLG Smart System AU3019 controller is malfunctioning, halting production on the line. Need urgent repair service to address the issue immediately.

—> Purchase or Repair:
#JLG by Nooprasit on 2013-08-17 06:32
My JLG Smart System 1600258 controller is malfunctioning, and I need to find a technician who can repair it as soon as possible. The unit is not responding to any commands, causing delays in our work.

—> Purchase or Repair:
#JLG by Bela on 2012-04-13 08:38
Could you please confirm if the JLG Smart System AU3019 Controller is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by SHEET on 2013-06-02 16:27
Please provide an update on the status of the JLG 1600286 control for the aerial work platform. It remains inoperable, and we urgently require assistance. Your

—> Purchase or Repair:
#JLG by Solomon on 2013-08-20 23:32
We experienced downtime with JLG 7013310 631/40038, a DC motor controller. It happened earlier during this shift. Could you please provide some insight into what may have caused the issue? Thank you.

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by Mario Hemond on 2014-12-05 06:23
Hello, our client is experiencing issues with their JLG 1600258 Controller. Can you please provide details on troubleshooting and repair options? Thank you.

—> Purchase or Repair:
#JLG by Pavle on 2012-07-14 18:56
The power module on JLG 1600346 PROA70481 is malfunctioning, causing a halt in production. Urgent repair service is needed to restore operations swiftly.

—> Purchase or Repair:
#JLG by vyas on 2016-06-01 16:22
Please provide information on part number JLG AU3019 1600289 related to a controller issue. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.