JLG Service & Repair Forum

: My JLG PROA70481 1600346 controller is experiencing intermittent issues where it intermittently stops working properly, causing the boom to malfunction. I'm seeking information on repair costs and whether a replacement unit would be more cost-effective in this instance. Could you please provide me with an estimate for both options?:

—> Purchase or Repair: Ticket Image

— Posted by Gustavo Diaz on 2025-04-07

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by The on 2013-08-21 20:32
Please advise if the JLG 1600286 is still supported or if replacement parts are available. We are looking for a repair option for this control unit used in an older aerial work platform. Thank you.

—> Purchase or Repair:
#JLG by Matthew Jimenez on 2012-06-07 14:49
The JLG AU3019 1600286 controller is exhibiting unusual behavior in the warehouse. It is not functioning as it normally does.

—> Purchase or Repair:
#JLG by amir reza on 2013-11-26 22:04
I'm experiencing some issues with the JLG 1600286 controller. It seems like something has stopped working, and I'm not sure what the exact problem is. Your assistance in resolving this would be greatly appreciated.

—> Purchase or Repair:
#JLG by End on 2015-03-16 19:25
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by Gerald Harman on 2014-12-20 16:44
The JLG AU3019 1600258 unit is not functioning properly. It is described as a Control Unit. That's all the information I have at the moment.

—> Purchase or Repair:
#JLG by McCall on 2014-05-04 19:20
Hey, the JLG 1600286 is down. Looks like an issue with the controller. Please check it out tomorrow. Thanks!

—> Purchase or Repair:
#JLG by Natarajan Subbiah on 2014-12-25 06:06
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module is not functioning properly, causing the machine to act up. I'm unsure about the exact details of this model, but it might need some attention.

—> Purchase or Repair:
#JLG by Bùi Ti on 2013-07-17 10:44
I have a JLG 1600286 control board that is malfunctioning and needs repair. Looking for a technician who can fix it

—> Purchase or Repair:
#JLG by omar rojas on 2015-07-13 14:20
We experienced downtime today due to an issue with the JLG AU3019 1600258 controller. Can you please provide some insight into what happened and when so we can address it before the next shift arrives? Thank you.

—> Purchase or Repair:
#JLG by amar nath chanda on 2013-08-15 08:32
The JLG 1600286 is a control unit used for an aerial work platform. It's currently not functioning, and the maintenance team needs to address the issue.

—> Purchase or Repair:
#JLG by charles dickson on 2013-08-10 14:32
Can this JLG 1600286 control for the aerial work platform be repaired or replaced? I am trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Ltd., on 2013-08-14 20:32
The JLG 1600286 control for the aerial work platform is malfunctioning and the unit went down mid-shift. Please have someone look into this issue. Thank you!

—> Purchase or Repair:
#JLG by Pakpoom on 2013-07-16 06:44
I need repair service for a JLG 7013310 631/40038 DC motor controller. It seems to be malfunctioning and impacting our operations. Thank you.

—> Purchase or Repair:
#JLG by Glen Blomgren on 2012-05-01 07:34
the JLG 1600346 PROA70481 power module failed during the night shift. Needs attention ASAP. Cheers!

—> Purchase or Repair:
#JLG by espindola on 2015-07-06 13:58
I'm experiencing some issues with the JLG MOS 60 D 631/40077. It seems like the DC Motor Controller is not working properly. It might be best to have a technician look into it to determine the exact problem.

—> Purchase or Repair:
#JLG by McDonald on 2014-05-02 19:20
Hello, we are reaching out regarding JLG part number 1600292 related to a controller issue. Can you provide details on troubleshooting steps or potential solutions for this problem? Thank you.

—> Purchase or Repair:
#JLG Smart System by sakkinen on 2008-02-04 00:33
I need assistance with my JLG Smart System AU3019 1600258 controller. Our unit is down, and I need to keep production running. Do you have one available for repair or sale?

—> Purchase or Repair:
#JLG by Throngpon on 2012-05-28 16:06
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG Smart System by linda benton on 2010-07-22 21:45
JLG Smart System AU3019 1600286 not responding to any commands.

—> Purchase or Repair:
#JLG by bryan on 2008-06-25 09:06
The JLG AU3019 1600258 Smart System Controller unit is not working.

—> Purchase or Repair:
#JLG by QUINTANILLA on 2014-11-02 13:57
Hello, I am inquiring about the JLG AU3019 Control Unit with serial number 1600258. We are looking for information on whether this unit is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG Smart System by Waldyr on 2008-01-24 20:48
Hello, I am inquiring about the JLG Smart System AU3019 1600258. My client is experiencing issues with the controller. Can you please provide more information on repair options and estimated costs? Thank you.

—> Purchase or Repair:
#JLG by saif on 2015-07-11 07:20
Drive failure on JLG AU3019 (SN 1600286) with Smart System drive. Need urgent attention from maintenance team.

—> Purchase or Repair:
#JLG by alberto on 2014-12-31 04:54
Do you have a replacement Control Module available for JLG AU3019 1600258 to keep production running?

—> Purchase or Repair:
#JLG by Karen Lopez on 2014-09-18 19:44
The JLG AU3019 1600258 control module is behaving erratically, displaying unusual behavior not typically observed.

—> Purchase or Repair:
#JLG by Larry Yudkowitz on 2014-05-05 19:20
Hey, the JLG 1600286 unit went down mid-shift. Controller issue. Please check and fix it when you get in. Thank you!

—> Purchase or Repair:
#JLG by igor vujovic on 2013-04-25 13:14
My JLG 7013310 631/40038, a DC motor controller, is malfunctioning and needs repair. Looking for a technician who can fix this industrial unit

—> Purchase or Repair:
#JLG by Lynn Luzzi on 2015-08-06 19:20
I'm currently facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive may not be functioning properly. Your assistance in troubleshooting and fixing this would be greatly appreciated.

—> Purchase or Repair:
#JLG by LymnWaymn on 2015-07-10 09:32
Hello, could you please provide repair info for our JLG 7013310 631/40038 DC Motor Controller that's stopped working? We need quick assistance. Thank you!

—> Purchase or Repair:
#JLG by jiang on 2012-05-03 09:18
The JLG AU3019 1600286 controller is malfunctioning. It is not responding as expected and displaying unusual behavior.

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by David Burgos on 2012-04-27 23:08
Can the JLG Smart System AU3019 Controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Rajagopal Mahesh on 2012-06-22 01:07
The power module labeled JLG 1600346 PROA70481 is exhibiting abnormal behavior in the warehouse. It is not performing its usual functions as expected.

—> Purchase or Repair:
#JLG by Gina King on 2012-04-23 13:21
Hello, I am following up again regarding the JLG 1600346 PROA70481 power module issue. The unit is still down. Please provide an update or resolution

—> Purchase or Repair:
#JLG by mudgil on 2015-08-02 06:20
Hello, I'm interested in purchasing the JLG 7013310 631/40038 DC Motor Controller. Can you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#JLG by Harold Buckhaults on 2013-02-28 13:50
JLG Smart System 1600258 controller displaying error code E123.

—> Purchase or Repair:
#JLG by SHANNON BRUCE on 2012-12-17 22:13
Hello, following up on the previous message regarding the JLG AU3019 1600286 Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by elkin garces on 2014-11-02 16:57
Our JLG AU3019 1600289 Control Module is still down. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by mark corby on 2012-08-05 17:24
Hello, I am interested in purchasing the JLG 1600346 PROA70481 power module for quick sourcing. Could you please provide me with information regarding pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by Grom on 2014-05-03 10:20
The control module on JLG AU3019 1600289 is behaving strangely - it is not functioning as it usually does. Please investigate the issue further.

—> Purchase or Repair:
#JLG by BRYAN FARR on 2014-12-23 23:06
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.

—> Purchase or Repair:
#JLG by Alberto Ruiz on 2014-02-18 20:12
I apologize for the inconvenience you're experiencing with your JLG AU3019 1600258 Control Unit. It seems like there might be an issue with its functionality, preventing it from operating as expected. I recommend contacting our technical support team for further assistance in diagnosing and resolvin…Purchase or Repair: Ticket Image...
Show More
#JLG Smart System by rai on 2025-06-08 15:14
The JLG Smart System AU3019 1600286 controller is displaying error code E123. Equipment is not responding to commands. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:
#JLG by bube on 2013-02-11 04:39
The JLG 1600286 control for one of the aerial work platforms in the warehouse is exhibiting unusual behavior. The unit is not responding as it typically does, and its actions are unpredictable and erratic. Would you be able to have a look and help us analyze the issue? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by Tendam on 2014-11-03 02:57
The JLG AU3019 1600289 experienced downtime due to a faulty Control Module. This occurred on . Looking to resolve the issue

—> Purchase or Repair:
#JLG by Sanket on 2016-11-29 22:02
I'm having trouble with the JLG AU3019 1600289 controller. Something seems to have stopped working, but I'm not exactly sure what the issue is. Could you please take a look and help me troubleshoot this problem? Thank you.

—> Purchase or Repair:
#JLG by Amr Salama on 2013-03-05 01:49
The JLG 7013310 631/40038 equipment is displaying error code E205. The DC motor is not responding and the equipment is unable to move. Please advise on troubleshooting steps or repairs needed to restore functionality.

—> Purchase or Repair:
#JLG by Dennis McCollums on 2012-01-17 13:45
The JLG Smart System AU3019 controller is not working.

—> Purchase or Repair:
#JLG by JOEL LEVIN on 2013-07-10 12:32
Hi there, we're currently in need of repair info for a JLG 1600286 controller. Could you please provide details on where we can find a replacement quickly? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.