JLG Service & Repair Forum
Hello, I'm looking for assistance with a JLG AU3019 part number 1600289 described as a Control Module. Can you provide information regarding troubleshooting or potential solutions for this item? Thank you.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "JLG"
- JLG → Jlg SMART SYSTEM AU3019 ↗
- JLG → Jlg AU3019 1600258 ↗
- JLG → Jlg AU3019 1600286 ↗
- JLG → Jlg 1600346 PROA70481 ↗
If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110
Recent 491 Comments
The JLG 1600286 control board malfunctioned during the shift. Please address the issue
—> Purchase or Repair:
—> Purchase or Repair:
The JLG Start System AU3019 1600258 is not functioning properly. Maintenance team needs assistance with the controller.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The power module labeled JLG 1600346 PROA70481 is exhibiting abnormal behavior in the warehouse. It is not performing its usual functions as expected.
—> Purchase or Repair:
—> Purchase or Repair:
The DC Motor Controller on JLG AU1830 631/40038 is malfunctioning, causing delays in production. Urgent repair service is required to get the line moving again swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime due to an issue with the JLG MOS 60 D 631/40077 DC Motor Controller. Can you provide insight on what happened and when it occurred before the next shift starts? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG Smart System 1600258 controller is malfunctioning, causing a halt in the aerial work platform production line. We need urgent repair service to address this issue
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600286 controller malfunctioned yesterday afternoon around 330 pm, resulting in significant downtime. Could you please provide an update on the situation before the next shift begins? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600286 unit is still down and requires immediate attention. Please provide an update
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 controller in the warehouse is exhibiting unusual behavior. It is not functioning as per its normal operations.
—> Purchase or Repair:
—> Purchase or Repair:
Currently experiencing a malfunction on the production line attributed to a faulty JLG 1600258 controller. Urgent attention and repair needed to resume operations
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime today due to an issue with the JLG AU3019 1600258 controller. Can you please provide some insight into what happened and when so we can address it before the next shift arrives? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The controler for JLG AU3019 with serial number 1600258 is malfunctioning, affecting the production line. We need urgent repair service to resolve the issue
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 control panel is displaying error code 452. The platform is not responding to any commands. Please advise on troubleshooting steps or repair needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I noticed that the DC motor controller on the JLG 7013310 631/40038 seems to have stopped working properly. It may be affecting the machine's performance but I'm not entirely sure. I recommend having a technician take a look at it to diagnose and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please provide details or an update on the repair status for part number AU1830 631/40038, which is a DC Motor Controller? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
I'm sorry to hear that your JLG AU3019 1600258 Control Module is not working properly. It seems like something may have malfunctioned. It might be best to consult a professional technician for a proper diagnosis and fix.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the JLG Smart System AU3019 Controller is still supported and if replacement parts are available for this unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 control board is displaying error code E123 and the machine is not responding to any commands. Need urgent assistance to troubleshoot and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 is displaying the error code ABC123 repeatedly, and the equipment is not responding to any commands. Please advise on next steps for troubleshooting and resolving this issue
—> Purchase or Repair:
—> Purchase or Repair:
Can the JLG 7013310 631/40038 DC motor controller be repaired or is it better to buy a new one? Just trying to get this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.
—> Purchase or Repair:
—> Purchase or Repair:
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module has stopped working. I'm unsure about the specific functionality of this model, but it needs attention.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm following up regarding the JLG Smart System controller AU3019 1600258. Can this be repaired or replaced? I'm working on checking this off my to-do list. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
There's an issue with the controller on JLG AU3019 1600286. A drive or board just failed, need to investigate and repair as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a replacement JLG AU3019 1600258 Control Module available for sale or repair? Need it urgently to keep production running. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 control for the aerial work platform is malfunctioning and the unit went down mid-shift. Please have someone look into this issue. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG Smart System AU3019 1600286 controller is displaying error code E123. Equipment is not responding to commands. Please advise on troubleshooting steps or repair options.
—> Purchase or Repair:
—> Purchase or Repair:
The Control Module on JLG AU3019 1600258 is malfunctioning, impacting the production line. Urgent repair service is needed to restore operations
—> Purchase or Repair:
—> Purchase or Repair:
I'm facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive is not functioning properly. I'd appreciate any help in troubleshooting this problem.
—> Purchase or Repair:
—> Purchase or Repair:
Are you able to repair or provide a replacement power module for JLG part number 1600346 PROA70481? We need to keep production running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
Machine displaying error code "E-Stop Activated" and not responding to any commands.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 7013310 631/40038, a DC motor controller, led to downtime. Need quick clarification before the next shift.
—> Purchase or Repair:
—> Purchase or Repair:
I need help with my JLG 1600258 controller. We are looking for a replacement or repair option, but we're not sure who manufactured it. Could you please let us know if it's still supported or if parts are available for this unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I need support with a JLG 1600346 PROA70481 power module that is not functioning. Looking for a skilled technician to repair this industrial unit
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update on the status of the JLG 1600286 control board. It is imperative that we resolve this issue
—> Purchase or Repair:
—> Purchase or Repair:
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: 
...
Show More
Show More
The JLG 1600286 controller malfunctioned today at 1130 AM, causing unexpected downtime. We need to address this issue
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 is showing Error Code 123. Need immediate assistance to diagnose and fix the issue. Equipment is currently down, and production is stalled.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: