JLG Service & Repair Forum

The JLG Smart System AU3019 controller is malfunctioning, causing downtime on the production line. It urgently needs repair to restore operations

—> Purchase or Repair: Ticket Image

— Posted by SACHIN JOHN on 2012-03-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Ltd., on 2013-08-14 20:32
The JLG 1600286 control for the aerial work platform is malfunctioning and the unit went down mid-shift. Please have someone look into this issue. Thank you!

—> Purchase or Repair:
#JLG by Fox on 2013-11-22 17:51
Hi, the JLG 1600286 controller malfunctioned earlier today, causing machine downtime from 930 AM to 1145 AM. Can you provide a quick update on the issue before the next shift comes in?

—> Purchase or Repair:
#JLG by reza ramezani on 2008-01-29 13:10
the JLG AU3019 1600258 Smart System Controller went down mid-shift. Needs attention ASAP. Let's troubleshoot first thing in the morning.

—> Purchase or Repair:
#JLG by Heckley on 2015-07-30 15:20
I'm currently experiencing an issue with the JLG E300AJP 1600292 machine. The articulator seems to have stopped working. Your attention to this matter would be greatly appreciated.

—> Purchase or Repair:
#JLG by bube on 2013-02-11 04:39
The JLG 1600286 control for one of the aerial work platforms in the warehouse is exhibiting unusual behavior. The unit is not responding as it typically does, and its actions are unpredictable and erratic. Would you be able to have a look and help us analyze the issue? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Luchyk on 2013-08-08 08:32
Hello, we have a JLG Smart System 1600258 controller for an aerial work platform that has stopped working. We need a replacement but cannot find one. Can you provide repair information for this? Thank you.

—> Purchase or Repair:
#JLG by floyd mora on 2014-02-11 04:04
Please provide the necessary details about the JLG 1600286 Controller. We need to check if it is still supported or if parts are available for replacement or repair options. Thank you.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by Terry Shook on 2015-07-23 19:20
JLG MOS 60 D 631/40077 DC Motor Controller not responding, machine offline.

—> Purchase or Repair:
#JLG by Wolff on 2014-03-15 17:43
Hello, I am interested in purchasing the JLG AU3019 1600258 Control Unit. Could you please confirm the pricing and availability for this model? I am looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Kathleen Kosman on 2014-12-22 17:06
Could you please confirm if the JLG 1600292 controller can be repaired or if it needs to be replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by John Vegh on 2015-01-09 19:41
Hi there, could you please provide repair info for a JLG AU1830 631/40038 DC Motor Controller? We need a replacement part urgently. Thanks!

—> Purchase or Repair:
#JLG by SHANNON BRUCE on 2012-12-17 22:13
Hello, following up on the previous message regarding the JLG AU3019 1600286 Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#Jlg Curtis Instruments by bllessinger on 2016-01-06 10:03
Hello, I am in need of a replacement Jlg Curtis Instruments 17400700 joystick for production. Do you have any available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by aureliano suarez cal on 2008-09-15 14:01
JLG AU3019 1600258 Smart System Controller Machine displaying error code E203, preventing operation.

—> Purchase or Repair:
#JLG by S P Kar on 2008-10-17 09:22
The JLG AU3019 1600258 Smart System Controller is not working.

—> Purchase or Repair:
#JLG by IPSEN on 2014-07-25 17:51
The JLG 1600286 is a controller unit that is not functioning correctly according to the maintenance team.

—> Purchase or Repair:
#JLG by William Cathey on 2013-11-02 10:52
Hello, I am reaching out on behalf of a client in need of assistance with a JLG 7013310 631/40038, which is a DC motor controller. Can you please provide information on repair services or troubleshooting steps for this part? Thank you.

—> Purchase or Repair:
#JLG by jose gonçalves on 2014-09-19 02:44
JLG 1600258 Controller is malfunctioning, causing production line downtime. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#JLG by felipe m. cruz on 2014-09-06 16:20
The JLG 1600286 controller is not responding to any commands.

—> Purchase or Repair:
#JLG by Jonathan Albert Ocampo on 2012-12-01 08:22
Hello, please provide an update on the status of the JLG 1600346 PROA70481 power module. It is imperative that we receive a response

—> Purchase or Repair:
#JLG by SeekersISeek on 2013-08-17 01:01
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by Stoll on 2015-07-24 11:43
My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair:
#JLG Smart System by Leo Poitras on 2008-04-11 12:35
I'm experiencing some issues with my JLG Smart System AU3019 1600258 controller. It seems like something has stopped working properly. Any guidance or advice on how to troubleshoot this would be greatly appreciated.

—> Purchase or Repair:
#JLG by Damandeep singh on 2005-12-21 00:00
The JLG 17400700 controller is not responding to any commands. Production is stalled until the controller issue is resolved.

—> Purchase or Repair:
#JLG by Palmer on 2012-11-30 07:39
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.

—> Purchase or Repair:
#JLG by md.ali hossain khan on 2013-05-14 13:48
Hi, the JLG 1600286 isn't responding when attempting to raise or lower the platform. No error code is displaying, but the controls seem unresponsive. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#JLG by Matthew Jimenez on 2012-06-07 14:49
The JLG AU3019 1600286 controller is exhibiting unusual behavior in the warehouse. It is not functioning as it normally does.

—> Purchase or Repair:
#JLG by MEHRABAN on 2015-07-24 01:20
The JLG AU1830 631/40038, which is a DC Motor Controller, experienced a failure causing downtime. This issue occurred at leading to disruptions in operations. Please provide a quick overview of what happened before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by Tanyadol Worawut on 2015-01-07 05:41
Could you please provide me with the pricing and availability of the JLG MOS 60 D 631/40077 DC Motor Controller? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Tsimivony Jean de la Croix on 2013-08-09 17:35
The JLG 1600286 control board malfunctioned during the shift. Please address the issue

—> Purchase or Repair:
#JLG by donohue on 2013-01-20 22:20
One of the drives or boards on the JLG 1600286 control board just failed. Will investigate further and update.

—> Purchase or Repair:
#JLG by Hristo on 2012-07-03 19:18
Hello, I am reaching out on behalf of a client who needs assistance with a JLG 1600346 PROA70481 power module. Could you please provide information on troubleshooting and repair options for this part? Thank you.

—> Purchase or Repair:
#JLG by ali ahmed ali toni on 2021-12-03 00:00
I'm having trouble with the JLG 1600292 controller. It seems like something has stopped working, but I'm not exactly sure what the issue is. Any assistance would be greatly appreciated.

—> Purchase or Repair:
#JLG by Lynda on 2013-01-27 17:47
The JLG 1600286 is the control board for the unit that is currently not working. That's the information I have.

—> Purchase or Repair:
#JLG by amir reza on 2013-11-26 22:04
I'm experiencing some issues with the JLG 1600286 controller. It seems like something has stopped working, and I'm not sure what the exact problem is. Your assistance in resolving this would be greatly appreciated.

—> Purchase or Repair:
#JLG by Shotts on 2013-05-02 10:50
We are still experiencing issues with the JLG 1600286 control board. Urgent action is required. Please provide an update immediately.

—> Purchase or Repair:
#JLG by Khalid on 2013-02-24 22:40
Hello, I hope this message finds you well. I am reaching out regarding the JLG 1600286 control board. Our team is currently looking to locate a replacement or repair option for this unit, but we are unsure of the manufacturer since it's an older model. Could you please confirm if this unit is still …Purchase or Repair: Ticket Image...
Show More
#JLG by GATTI, on 2015-07-10 01:06
JLG AU3019 1600258 controller not responding to any input commands.

—> Purchase or Repair:
#JLG by keivan on 2014-12-12 11:16
Hi there, I hope you're doing well. I'm interested in purchasing the JLG AU3019 1600258 Control Module for a unit we have. Can you please provide information on the pricing and availability? We are looking to source this part quickly. Thank you.

—> Purchase or Repair:
#JLG by çäîðîâüå on 2015-07-09 11:14
The JLG AU1830 631/40038 is showing Error Code 123. Need immediate assistance to diagnose and fix the issue. Equipment is currently down, and production is stalled.

—> Purchase or Repair:
#JLG by GERRALD on 2014-12-15 20:44
The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.

—> Purchase or Repair:
#JLG by reidar on 2014-01-03 10:07
Could you please provide pricing and availability for the JLG AU3019 1600258 control unit? We are looking to source one quickly and would appreciate your assistance. Thank you!

—> Purchase or Repair:
#JLG by Mark Krohn on 2014-02-16 21:58
JLG 1600258 controller not responding.\

—> Purchase or Repair:
#JLG by Kazmi on 2014-05-01 12:20
I'm currently experiencing some issues with the JLG 1600286 controller as it seems to have stopped working. Could you please have a look and see what may be causing this problem? Thank you.

—> Purchase or Repair:
#JLG by Taborda on 2014-07-30 07:24
Control module of JLG AU3019 1600289 is malfunctioning.

—> Purchase or Repair:
#JLG by Pakpoom on 2013-07-16 06:44
I need repair service for a JLG 7013310 631/40038 DC motor controller. It seems to be malfunctioning and impacting our operations. Thank you.

—> Purchase or Repair:
#JLG by Casey worcester on 2014-12-15 17:44
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module has stopped working. I'm unsure about the specific functionality of this model, but it needs attention.

—> Purchase or Repair:
#JLG by Kendall Bailey, Nnor on 2013-08-11 08:32
Can the JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by OSA on 2015-07-29 18:20
Hi team, just a heads up that we experienced downtime with the JLG MOS 60 D 631/40077 (DC Motor Controller) today during our shift. Need to gather more details before the next shift comes in. Thanks!

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.