JLG Service & Repair Forum
The JLG 1600286 control board is displaying error code E123 and the machine is not responding to any commands. Need urgent assistance to troubleshoot and resolve the issue.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "JLG"
- JLG → Jlg AU3019 1600258 ↗
- JLG → Jlg AU3019 1600286 ↗
- JLG → Jlg 1600346 PROA70481 ↗
- JLG → Jlg SMART SYSTEM AU3019 ↗
If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 491 Comments
Just had a failure on JLG 1600286 control board. Need a replacement ASAP. Heading to next machine now.
—> Purchase or Repair:
—> Purchase or Repair:
I need someone to repair the Control Module on my JLG AU3019 1600289. The industrial unit is not responding or functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, this is a follow-up regarding the JLG AU3019 1600258 Smart System Controller. The unit is still down. Please provide an update
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update or estimate for the repair of JLG AU3019 1600258 - CONTROLLER. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with JLG 1600286 control board, not functioning properly. Need assistance to repair industrial unit. Thank you in advance for your help.
—> Purchase or Repair:
—> Purchase or Repair:
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 control board malfunctioned during the shift. Please address the issue
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the JLG 1600286 went down mid-shift. Issue is with the controller. Please check and fix it during the day. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 controller is not functioning as usual. It is exhibiting abnormal behavior that I have not witnessed before.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600286 is down due to a Smart System drive issue. Please have someone look into it first thing in the morning.
—> Purchase or Repair:
—> Purchase or Repair:
Can the JLG 7013310 631/40038 DC motor controller be repaired or is it better to buy a new one? Just trying to get this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
the JLG Smart System AU3019 controller for Unit 7 went down mid-shift. Please check and fix it during the day shift. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm reaching out on behalf of my client who has a JLG AU3019 1600258 Smart System Controller that needs repair. We are looking for assistance in diagnosing and fixing the issue. Can you please provide us with more information on how we can proceed with getting this repaired? Thank you.—> …Purchase or Repair: 
...
Show More
Show More
Looking for a repair service for my JLG 1600286 control unit. The aerial work platform is not responding to commands. Need immediate assistance to get it back up and running.
—> Purchase or Repair:
—> Purchase or Repair:
I'm currently experiencing an issue with the JLG E300AJP 1600292 machine. The articulator seems to have stopped working. Your attention to this matter would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 control board is displaying error code E123 and the machine is not responding to any commands. Need urgent assistance to troubleshoot and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.
—> Purchase or Repair:
—> Purchase or Repair:
Need assistance with a JLG AU3019 1600286 controller. Unit not functioning properly, require repair service. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
My JLG AU3019 1600258 is not responding to any commands at the control module. Need urgent repair to resume work. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We are still waiting for a response regarding the JLG AU3019 1600289 controller. The unit remains inoperable. Please reply
—> Purchase or Repair:
—> Purchase or Repair:
Please provide information on part number JLG AU3019 1600289 related to a controller issue. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The controler for JLG AU3019 with serial number 1600258 is malfunctioning, affecting the production line. We need urgent repair service to resolve the issue
—> Purchase or Repair:
—> Purchase or Repair:
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.
—> Purchase or Repair:
—> Purchase or Repair:
The control board on JLG 1600286 is behaving abnormally. It is not responding as it typically does, and the unit is not functioning normally.
—> Purchase or Repair:
—> Purchase or Repair:
Hi, do you have a JLG Smart System AU3019 controller available for sale or repair that we can purchase? We need it to keep production running smoothly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600258 control module is behaving erratically, displaying unusual behavior not typically observed.
—> Purchase or Repair:
—> Purchase or Repair:
Controller for JLG AU3019 1600286 just failed. Need immediate diagnosis and replacement.
—> Purchase or Repair:
—> Purchase or Repair:
Drive failure on JLG AU3019 (SN 1600286) with Smart System drive. Need urgent attention from maintenance team.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We encountered an issue with the JLG Smart System 1600258 controller for our aerial work platform earlier today, causing downtime from 230 PM to 345 PM. Could you please provide some insights on what might have caused this malfunction? We need to have this resolved before the next shift. Thank you. …Purchase or Repair: 
...
Show More
Show More
The JLG AU3019 1600286 is showing error code E123 and not responding to any commands. Equipment is completely unresponsive. Please advise on next steps to troubleshoot and repair.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 DC Motor Controller is exhibiting abnormal behavior such as inconsistency in speed, sporadic movements, and unusual sounds. Further investigation is required to determine the root cause of the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a replacement control board available for JLG 1600286 to keep production running?
—> Purchase or Repair:
—> Purchase or Repair:
I believe the DC Motor Controller on your JLG AU1830 631/40038 may be malfunctioning, causing the machine to stop working properly. I recommend having a technician inspect and diagnose the issue to determine the best course of action for repairs. Let me know if you need further assistance. —> …Purchase or Repair: 
...
Show More
Show More
Hello, I am contacting you on behalf of a client who is experiencing issues with part number JLG 1600286, which appears to be the controller. Could you please provide more information on possible repairs or replacements for this part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime with the JLG MOS 60 D 631/40077 due to issues with the DC Motor Controller. The incident occurred today during the morning shift. Your
—> Purchase or Repair:
—> Purchase or Repair:
The control board on the JLG 1600286 seems to be malfunctioning or experiencing some issues. It's causing the equipment to act up, and something has stopped working as expected. It might be best to have a technician take a look to diagnose and resolve the problem.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with JLG AU3019 1600258 Smart System Controller. Need repair service ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing a JLG 59110003 1600292 Power Supply. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, could you please provide assistance with JLG Smart System 1600258? It's a controller for an aerial work platform, and my client is experiencing issues with it. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 is displaying the error code ABC123 repeatedly, and the equipment is not responding to any commands. Please advise on next steps for troubleshooting and resolving this issue
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600258 controler is malfunctioning, causing delays in production. Please address this issue immediately to resume operations smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 59110003 1600292 power supply unit experienced a malfunction earlier today, causing downtime on the shift. Can you provide me with a brief explanation of what went wrong and when it occurred? I need to address this issue before the next shift starts.
—> Purchase or Repair:
—> Purchase or Repair:
The control module for JLG AU3019, serial number 1600258, is malfunctioning and causing a halt in production. It is critical to repair or replace this module swiftly to resume operations immediately.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, could you please provide repair info for our JLG 7013310 631/40038 DC Motor Controller that's stopped working? We need quick assistance. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Can you repair my JLG E300AJP 1600292 or do you have another one available for sale? Production is on hold. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: