JLG Service & Repair Forum
The JLG AU3019 1600289 experienced downtime due to a faulty Control Module. This occurred on . Looking to resolve the issue
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "JLG"
- JLG → Jlg AU3019 1600286 ↗
- JLG → Jlg AU3019 1600258 ↗
- JLG → Jlg SMART SYSTEM AU3019 ↗
- JLG → Jlg 1600346 PROA70481 ↗
If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 491 Comments
We encountered an issue with the JLG Smart System 1600258 controller for our aerial work platform earlier today, causing downtime from 230 PM to 345 PM. Could you please provide some insights on what might have caused this malfunction? We need to have this resolved before the next shift. Thank you. …Purchase or Repair: 
...
Show More
Show More
The machine is not functioning properly, and it seems to be related to the control board. It would be best to have a technician look into it to determine the exact issue. Thank you for bringing this to our attention.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my JLG Smart System AU3019 controller. It is not responding to commands and seems to be malfunctioning. Looking for a technician to repair it
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600292 controller has failed on one of the machines drive or board issue. Need to address this ASAP to get the equipment back up and running.
—> Purchase or Repair:
—> Purchase or Repair:
the JLG 1600286 controller went down mid-shift. Kindly check and fix during the day. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Can the JLG AU1830 631/40038 DC Motor Controller be repaired or bought? Just trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Please advise if the JLG AU3019 1600258 CONTROLER is still supported or if replacement parts are available. The unit is older, and we are uncertain about the manufacturer. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I need immediate assistance with the JLG Smart System AU3019 1600258 controller. The unit is still down. Please respond
—> Purchase or Repair:
—> Purchase or Repair:
I'm following up on my previous message regarding the JLG 7013310 631/40038 DC Motor Controller. The unit is still down. I need a response as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
Need assistance with a JLG AU3019 1600286 controller. Unit not functioning properly, require repair service. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm in need of a replacement JLG 1600286 controller to keep production running smoothly. Do you have any available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I hope this message finds you well. I am reaching out regarding the JLG 1600286 control board. Our team is currently looking to locate a replacement or repair option for this unit, but we are unsure of the manufacturer since it's an older model. Could you please confirm if this unit is still …Purchase or Repair: 
...
Show More
Show More
The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime on unit JLG 1600286 due to a control issue for the aerial work platform. It happened during the morning shift today. Can you provide a quick update on the situation before the next shift starts?
—> Purchase or Repair:
—> Purchase or Repair:
Can the JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module has stopped working. I'm unsure about the specific functionality of this model, but it needs attention.
—> Purchase or Repair:
—> Purchase or Repair:
just got a heads up that the power module on JLG 1600346 PROA70481 has failed. Need to address this pronto to keep things up and running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update or estimate for the repair of JLG AU3019 1600258 - CONTROLLER. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm facing an issue with the JLG AU3019 1600286. It seems like the Smart System drive is not functioning properly. I'd appreciate any help in troubleshooting this problem.
—> Purchase or Repair:
—> Purchase or Repair:
There seems to be an issue with the JLG 1600286 Controller. Maintenance team is currently working on it.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600289 is down and showing Error Code 34. Control Module appears faulty as the platform will not raise/lower properly. Please advise on troubleshooting steps or repair options.
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the JLG 7013310 631/40038 DC motor controller went down mid-shift. Please check it out asap tomorrow. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The Control Module on JLG AU3019 1600258 is malfunctioning, causing a production line halt. Urgent repair is needed to resume operations swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a replacement control board available for JLG 1600286 to keep production running?
—> Purchase or Repair:
—> Purchase or Repair:
I'm reporting that the JLG AU3019 1600258 control module malfunctioned, causing downtime at 845 AM today. Need a quick resolution before the next shift begins. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Please prioritize fixing the JLG Smart System AU3019 controller as it is still down. Your
—> Purchase or Repair:
—> Purchase or Repair:
The JLG E300AJP 1600292 is currently showing error code 1014 and is unable to articulate. Please advise on troubleshooting steps or repair needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG AU3019 1600258 experienced downtime due to a malfunction in the Control Module. The issue occurred today during the morning shift. Can you provide a quick overview of what happened before the next shift arrives? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 1600286 is the control board for the unit that is currently not working. That's the information I have.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG Smart System 1600258 controller is malfunctioning, causing a halt in the aerial work platform production line. We need urgent repair service to address this issue
—> Purchase or Repair:
—> Purchase or Repair:
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Urgent repair service needed to resume operations immediately.
—> Purchase or Repair:
—> Purchase or Repair:
The control module on JLG AU3019 1600289 is behaving strangely - it is not functioning as it usually does. Please investigate the issue further.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, could you please provide repair info for our JLG 7013310 631/40038 DC Motor Controller that's stopped working? We need quick assistance. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, Could you please provide repair information for a JLG AU3019 Control Module (Part Number 1600258)? It stopped working and we need a replacement urgently. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in the JLG 7013310 631/40038 DC motor controller. I would like to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: