JLG Service & Repair Forum

The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.

—> Purchase or Repair: Ticket Image

— Posted by GERRALD on 2014-12-15

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by AMIT on 2015-01-11 17:41
The JLG AU3019 1600286 is down due to a Smart System drive issue. Please have someone look into it first thing in the morning.

—> Purchase or Repair:
#JLG by Robertson on 2014-01-05 04:53
The JLG AU3019 1600258 Control Unit is still down. Please reply at your earliest convenience to address this issue. Thank you.

—> Purchase or Repair:
#JLG by Darshak Kothari on 2013-07-17 23:55
the JLG Smart System 1600258 on one of the AWP units went down mid-shift. Please troubleshoot and repair it first thing in the morning to avoid further delays. Thanks!

—> Purchase or Repair:
#JLG by chandran on 2013-08-18 04:32
Can the JLG 1600286 controller be repaired or bought? Trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by felipe m. cruz on 2014-09-06 16:20
The JLG 1600286 controller is not responding to any commands.

—> Purchase or Repair:
#JLG by blannybuS on 2015-08-05 00:20
I'm reporting a downtime incident with the JLG AU3019 1600258 due to an issue with the controller. Can you provide a quick overview of what happened and when? It's crucial to address this before the next shift begins.

—> Purchase or Repair:
#JLG by Raul Martinez on 2008-09-16 19:42
Could the JLG AU3019 1600258 Smart System Controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Aaronson on 2015-03-09 05:13
The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:
#JLG by donohue on 2013-01-20 22:20
One of the drives or boards on the JLG 1600286 control board just failed. Will investigate further and update.

—> Purchase or Repair:
#JLG by connell on 2015-08-05 21:20
Hello, do you have a JLG AU3019 1600258 controller available for sale or repair? Our production has been affected, and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by GATTI, on 2015-07-10 01:06
JLG AU3019 1600258 controller not responding to any input commands.

—> Purchase or Repair:
#JLG by Heckley on 2015-07-30 15:20
I'm currently experiencing an issue with the JLG E300AJP 1600292 machine. The articulator seems to have stopped working. Your attention to this matter would be greatly appreciated.

—> Purchase or Repair:
#JLG by Walther on 2014-12-21 06:44
The JLG AU3019 1600258 experienced downtime due to a malfunction in the Control Module. The issue occurred today during the morning shift. Can you provide a quick overview of what happened before the next shift arrives? Thank you.

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by The on 2013-08-21 20:32
Please advise if the JLG 1600286 is still supported or if replacement parts are available. We are looking for a repair option for this control unit used in an older aerial work platform. Thank you.

—> Purchase or Repair:
#JLG by Garay on 2013-08-19 01:32
The JLG Smart System 1600258 controller is malfunctioning, causing a halt in the aerial work platform production line. We need urgent repair service to address this issue

—> Purchase or Repair:
#JLG by HMAZ on 2015-02-18 04:24
Hi there, Need repair info for JLG AU3019 1600258 controller - can you assist? Thanks!

—> Purchase or Repair:
#JLG by Jonathan Tomlinson on 2015-06-22 19:12
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.

—> Purchase or Repair:
#JLG by Abby on 2015-04-14 23:18
I'm experiencing an issue with the JLG AU1830 631/40038, specifically with the DC Motor Controller. It seems like something has stopped working, but I'm not sure exactly what the problem is. I would appreciate any assistance or advice you can provide to help troubleshoot and resolve this issue. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Nate on 2012-05-14 20:30
My JLG AU3019 1600286 controller is malfunctioning, and I need it fixed urgently to resume operations. Looking for a reliable repair service to address the issue

—> Purchase or Repair:
#JLG by Stefanik on 2015-07-19 13:20
I am following up on my previous message regarding the JLG 7013310 631/40038 DC Motor Controller. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:
#JLG by Carlos Melo on 2013-05-17 12:54
Please provide a status update on the JLG Smart System 1600258. The unit is still down and we need assistance urgently.

—> Purchase or Repair:
#JLG by Marc Poisson on 2014-10-27 07:18
Can the JLG AU3019 1600258 Control Module be repaired or purchased? I'm trying to get this checked off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by pasha on 2013-08-05 03:32
We have a critical issue with JLG 1600286 Controller affecting the production line. It's failing to provide necessary commands, halting our operations. Urgent repair is needed to avoid further downtime.

—> Purchase or Repair:
#JLG by Winery on 2013-06-21 18:58
Hello, I am reaching out on behalf of a client who is experiencing issues with a JLG part number 1600286, described as a controller. Can you please provide information on troubleshooting steps or repair options for this specific part? Thank you.

—> Purchase or Repair:
#JLG by Slobodan on 2013-01-20 23:20
Hello, I'm interested in purchasing a JLG 1600286 controller. I'm not entirely sure if this is the right model, but I was advised to inquire with you. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by GERRALD on 2014-12-15 20:44
The JLG AU3019 1600289 control module is not functioning properly. Please inspect and repair as necessary.

—> Purchase or Repair:
#JLG by Mortenson on 2014-12-24 21:06
Could you please confirm if the JLG 59110003 1600292 Power Supply is still supported, or if replacement parts are available for this unit? It is an older model, and our team is unsure of the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by stephen kaiteris on 2014-12-18 22:44
Hello, I am interested in purchasing the JLG control module AU3019 1600258 for my equipment. I am not 100% certain if this is the correct model, but my team suggested I reach out to inquire about pricing and availability. I need to source one quickly. Could you please provide information regarding t…Purchase or Repair: Ticket Image...
Show More
#JLG by MOINUDDIN on 2012-08-24 11:09
There's an issue with the controller on JLG AU3019 1600286. A drive or board just failed, need to investigate and repair as soon as possible.

—> Purchase or Repair:
#JLG by Cumings on 2014-12-31 06:54
Please advise if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by Colic on 2015-07-16 09:20
Hello, do you have a JLG AU3019 1600286 Smart System drive available for sale or repair? We need to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Chinmaya on 2013-04-12 05:15
One of the drives or boards on the JLG Smart System 1600258 just failed. Need to investigate and replace ASAP to get this machine back up and running.

—> Purchase or Repair:
#JLG by Al or Lori Hyde on 2015-07-24 20:43
The JLG MOS 60 D 631/40077 is displaying error code 15 indicating a fault in the DC Motor Controller. The equipment is currently down, and we need immediate assistance to diagnose and resolve this issue.

—> Purchase or Repair:
#JLG by mohsen on 2012-09-12 13:44
Are you able to repair or provide a replacement power module for JLG part number 1600346 PROA70481? We need to keep production running smoothly.

—> Purchase or Repair:
#JLG by Shotts on 2013-05-02 10:50
We are still experiencing issues with the JLG 1600286 control board. Urgent action is required. Please provide an update immediately.

—> Purchase or Repair:
#JLG by Lindberg on 2012-02-12 16:14
Please provide me with more information about the JLG 1600346 PROA70481 power module. I'm trying to locate a possible replacement or repair option for this unit, but need to know if it is still supported or if parts are available. Thank you.

—> Purchase or Repair:
#JLG by Felipe on 2013-08-11 08:35
Hello, my JLG Smart System 1600258 is displaying error code E450. The platform is not extending properly, and there is a constant beeping alarm. Please advise on how to resolve this issue. Thank you.

—> Purchase or Repair:
#JLG by Karen Hess on 2014-09-30 11:12
I need help with my JLG 1600258 controller. We are looking for a replacement or repair option, but we're not sure who manufactured it. Could you please let us know if it's still supported or if parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Yasuhiro on 2025-06-09 15:26
The JLG 1600292 is displaying error code E322. Equipment is not responding to controls and showing intermittent power loss. Need assistance troubleshooting and repairing as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by frice on 2015-07-17 18:20
JLG AU3019 1600258 controller not responding to commands.

—> Purchase or Repair:
#JLG by Close on 2013-07-04 00:39
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#JLG by William Jimenez on 2014-11-21 19:12
JLG AU3019 1600258 control unit not responding, machine unable to function.

—> Purchase or Repair:
#JLG by Gina King on 2012-04-23 13:21
Hello, I am following up again regarding the JLG 1600346 PROA70481 power module issue. The unit is still down. Please provide an update or resolution

—> Purchase or Repair:
#JLG by Palmer on 2012-11-30 07:39
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.

—> Purchase or Repair:
#JLG by David VanKirk on 2014-12-24 00:44
Hello, we have a client in need of information regarding the JLG part number 59110003 1600292, described as a Power Supply. Can you please provide details on availability, pricing, and estimated repair time? Thank you.

—> Purchase or Repair:
#JLG by Matthew on 2014-12-04 10:23
I need urgent assistance with my JLG AU3019 1600289. The Control Module needs attention, and the unit is still down. Please prioritize this issue and ensure someone gets back to me

—> Purchase or Repair:
#JLG by Tom philp on 2015-08-12 13:20
The JLG MOS 60 D 631/40077 DC Motor Controller is not working.

—> Purchase or Repair:
#JLG by Karen Lopez on 2014-09-18 19:44
The JLG AU3019 1600258 control module is behaving erratically, displaying unusual behavior not typically observed.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.