JLG Service & Repair Forum

Need assistance with a JLG AU3019 1600286 controller. Unit not functioning properly, require repair service. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by Compton on 2012-06-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Palmer on 2012-11-30 07:39
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.

—> Purchase or Repair:
#JLG by Lai, Cheuk Kuen on 2013-03-16 15:15
The JLG 1600286 controller in the warehouse is exhibiting unusual behavior. It is not functioning as per its normal operations.

—> Purchase or Repair:
#JLG by CATHY KANALEY on 2015-08-07 16:20
We experienced downtime with the JLG MOS 60 D 631/40077 due to issues with the DC Motor Controller. The incident occurred today during the morning shift. Your

—> Purchase or Repair:
#JLG by SACHIN JOHN on 2012-03-12 11:55
The JLG Smart System AU3019 controller is malfunctioning, causing downtime on the production line. It urgently needs repair to restore operations

—> Purchase or Repair:
#JLG by Matthew Jimenez on 2012-06-07 14:49
The JLG AU3019 1600286 controller is exhibiting unusual behavior in the warehouse. It is not functioning as it normally does.

—> Purchase or Repair:
#JLG Curtis by Carlos Pio dos Reis on 2025-06-05 16:46
The JLG Curtis 17400700 joystick on the production line is malfunctioning, causing delays and affecting productivity. Please resolve this issue urgently to minimize downtime and resume operations

—> Purchase or Repair:
#JLG by Tsimivony Jean de la Croix on 2013-08-09 17:35
The JLG 1600286 control board malfunctioned during the shift. Please address the issue

—> Purchase or Repair:
#JLG by Al or Lori Hyde on 2015-07-24 20:43
The JLG MOS 60 D 631/40077 is displaying error code 15 indicating a fault in the DC Motor Controller. The equipment is currently down, and we need immediate assistance to diagnose and resolve this issue.

—> Purchase or Repair:
#JLG by PRABHAKARA on 2013-08-09 01:32
Do you have a replacement control board available for JLG 1600286 to keep production running?

—> Purchase or Repair:
#JLG by ENG AHMED MARZOUK on 2013-12-06 06:48
Do you have a JLG 7013310 631/40038 DC motor controller available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Lourenço on 2015-03-09 15:13
Hi team, we experienced downtime on the JLG AU3019 1600258 due to a faulty controller. The issue occurred at 1030 PM yesterday. Need quick resolution before the next shift. Let me know if you have any insights. Thank you!

—> Purchase or Repair:
#JLG by Ron Wilson on 2015-08-09 21:20
Could you please provide details or an update on the repair status for part number AU1830 631/40038, which is a DC Motor Controller? Thank you!

—> Purchase or Repair:
#JLG by Debra Posey on 2012-06-13 02:06
The JLG Smart System AU3019 controller is displaying an error message and preventing the machine from functioning.

—> Purchase or Repair:
#JLG by Mele on 2013-05-24 17:05
The JLG 1600286 unit is still down. We require immediate assistance. Kindly respond

—> Purchase or Repair:
#JLG by Lazaros Papazoglou on 2025-06-07 07:00
I'm currently facing an issue with the JLG 1600267 machine something seems to have stopped working. I believe it has to do with the joystick controller, but I'm uncertain about the specifics. Would appreciate assistance in diagnosing and resolving the problem.

—> Purchase or Repair:
#JLG by SUMEET on 2015-07-24 21:43
Can the JLG AU1830 631/40038 DC Motor Controller be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by GLENN SUYDAM on 2012-03-20 12:32
Machine displaying error code "E-Stop Activated" and not responding to any commands.

—> Purchase or Repair:
#JLG by jawed on 2014-12-23 08:06
The JLG 59110003 1600292 power supply unit experienced a malfunction earlier today, causing downtime on the shift. Can you provide me with a brief explanation of what went wrong and when it occurred? I need to address this issue before the next shift starts.

—> Purchase or Repair:
#JLG by nicholas bohn on 2012-02-18 06:17
Can the JLG 1600346 PROA70481 power module be repaired or purchased? I'm hoping to check this off my to-do list.

—> Purchase or Repair:
#JLG by David Richardson on 2013-11-13 20:19
Hello, I am interested in the JLG Smart System 1600258 for an aerial work platform. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Chad Hulse on 2014-05-06 07:20
Hello, I am following up again regarding the JLG AU3019 1600289 Control Module issue. The unit is still down. Please provide an update at your earliest convenience. Thank you.

—> Purchase or Repair:
#JLG by IPSEN on 2014-07-25 17:51
The JLG 1600286 is a controller unit that is not functioning correctly according to the maintenance team.

—> Purchase or Repair:
#JLG by Colic on 2015-07-16 09:20
Hello, do you have a JLG AU3019 1600286 Smart System drive available for sale or repair? We need to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Pavle on 2012-07-14 18:56
The power module on JLG 1600346 PROA70481 is malfunctioning, causing a halt in production. Urgent repair service is needed to restore operations swiftly.

—> Purchase or Repair:
#JLG by shirlee caputo on 2012-08-05 02:24
Do you have a JLG AU3019 1600286 controller available for sale or repair? Production is down and we need to keep things running.

—> Purchase or Repair:
#JLG by Bob Cramsie on 2014-03-15 05:43
The unit with part number JLG 59110003 and serial number 1600292 appears to be a power supply. It's not working and needs maintenance.

—> Purchase or Repair:
#JLG by floyd mora on 2014-02-11 04:04
Please provide the necessary details about the JLG 1600286 Controller. We need to check if it is still supported or if parts are available for replacement or repair options. Thank you.

—> Purchase or Repair:
#JLG by moss on 2014-02-12 01:58
The JLG 1600286 controller is malfunctioning, leading to critical downtime on the production line. Urgent repair is needed to ensure operations resume

—> Purchase or Repair:
#JLG by LISA MERRELL on 2012-01-22 08:23
I need support with a JLG 1600346 PROA70481 power module that is not functioning. Looking for a skilled technician to repair this industrial unit

—> Purchase or Repair:
#JLG by Gérald on 2015-07-13 01:20
Hello, I'm reaching out on behalf of a client with a JLG AU3019 1600286 equipped with a Smart System drive. The client is experiencing issues with the equipment and requires assistance. Can you please provide more information on possible solutions or repairs needed for this specific model? Thank you…Purchase or Repair: Ticket Image...
Show More
#JLG by Tanyadol on 2012-10-12 11:15
JLG AU3019 1600286 controller not responding, preventing machine operation.

—> Purchase or Repair:
#JLG by Reid on 2013-10-18 10:11
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Immediate repair is necessary to resume operations.

—> Purchase or Repair:
#JLG by ronnie lemon on 2013-04-05 23:57
Hello, I am interested in the JLG 7013310 631/40038 DC motor controller. I would like to inquire about the pricing and availability of this unit as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Garth on 2015-07-24 17:43
Hello, I'm reaching out regarding the JLG AU1830 631/40038 DC Motor Controller. We are looking for information on whether this unit is still supported or if replacement parts are available. Your assistance in identifying repair options or providing guidance on the availability of parts would be grea…Purchase or Repair: Ticket Image...
Show More
#JLG by ray bellamy on 2015-08-12 00:20
I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern

—> Purchase or Repair:
#JLG by Kendall Bailey, Nnor on 2013-08-11 08:32
Can the JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Franky on 2013-08-12 14:35
The JLG 1600286 controller malfunctioned today at 1130 AM, causing unexpected downtime. We need to address this issue

—> Purchase or Repair:
#JLG by bart hinesly on 2013-05-11 04:45
JLG 1600286 controller displaying error code E355.

—> Purchase or Repair:
#JLG by Amr Salama on 2013-03-05 01:49
The JLG 7013310 631/40038 equipment is displaying error code E205. The DC motor is not responding and the equipment is unable to move. Please advise on troubleshooting steps or repairs needed to restore functionality.

—> Purchase or Repair:
#JLG by John Casper on 2013-07-26 00:32
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.

—> Purchase or Repair:
#JLG by saliou ngom on 2014-12-23 04:44
The JLG 1600292 controller has failed on one of the machines drive or board issue. Need to address this ASAP to get the equipment back up and running.

—> Purchase or Repair:
#JLG by MARK W CONKLIN on 2014-02-18 04:12
I'm experiencing issues with the JLG AU3019 1600289 Control Module. It seems like something has stopped working, but I'm not entirely sure what it does. Any assistance would be greatly appreciated.

—> Purchase or Repair:
#JLG by Jesus Mª Matarranz Leon on 2013-07-29 03:32
Hello, I am interested in the JLG 1600286 control for the aerial work platform. I am trying to purchase this unit quickly but want to confirm if this is the right model. Could you please provide information on pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by alberto on 2014-12-31 04:54
Do you have a replacement Control Module available for JLG AU3019 1600258 to keep production running?

—> Purchase or Repair:
#JLG by Victor manuel Padill on 2013-02-18 03:49
Could you please provide information on the JLG 1600286 unit controller? We are interested in knowing if it is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG Smart System by Waldyr on 2008-01-24 20:48
Hello, I am inquiring about the JLG Smart System AU3019 1600258. My client is experiencing issues with the controller. Can you please provide more information on repair options and estimated costs? Thank you.

—> Purchase or Repair:
#JLG by Jinwhoe on 2013-04-06 09:57
The JLG 1600286 control panel is displaying error code 452. The platform is not responding to any commands. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:
#JLG by mortezazadeh on 2015-08-15 13:20
I believe the DC Motor Controller on your JLG AU1830 631/40038 may be malfunctioning, causing the machine to stop working properly. I recommend having a technician inspect and diagnose the issue to determine the best course of action for repairs. Let me know if you need further assistance. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by ellis on 2015-08-12 02:20
The JLG AU3019 1600286 unit isn't working.

—> Purchase or Repair:
#JLG by Aaronson on 2015-03-09 05:13
The JLG MOS 60 D 631/40077 DC Motor Controller is displaying unusual behavior in the warehouse. It is not functioning normally and appears to be acting erratically.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.