JLG Service & Repair Forum

Experiencing issues with my JLG 1600286 control for aerial work platform, looking for repair service as it's not functioning properly and affecting productivity on-site. Need someone reliable to fix this unit

—> Purchase or Repair: Ticket Image

— Posted by Cheong on 2013-03-21

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Brodar on 2013-07-22 10:32
The DC motor controller (JLG 7013310 631/40038) on the line is malfunctioning, leading to significant production delays. Urgent attention and repair are needed to get operations back on track immediately.

—> Purchase or Repair:
#JLG by saillet sebastien on 2012-10-12 09:15
Please urgently provide an update on the status of the JLG 1600346 PROA70481 power module as the unit is still down. It is crucial that we have a response this time. Thank you.

—> Purchase or Repair:
#JLG by Mario Hemond on 2014-12-05 06:23
Hello, our client is experiencing issues with their JLG 1600258 Controller. Can you please provide details on troubleshooting and repair options? Thank you.

—> Purchase or Repair:
#JLG by Matthew Jimenez on 2012-06-07 14:49
The JLG AU3019 1600286 controller is exhibiting unusual behavior in the warehouse. It is not functioning as it normally does.

—> Purchase or Repair:
#JLG Smart System by TOM UELNER on 2010-10-13 13:59
We are reaching out to inquire if the JLG Smart System AU3019 1600286, which is an Aerial Work Platforms Controller, is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by Maximo on 2013-02-07 15:18
The control panel on JLG 1600286 is unresponsive, preventing operators from adjusting platform height and movement. This is impacting production as work is delayed. Please prioritize this repair to minimize downtime and resume operations

—> Purchase or Repair:
#JLG by vyas on 2016-06-01 16:22
Please provide information on part number JLG AU3019 1600289 related to a controller issue. Thank you.

—> Purchase or Repair:
#JLG by Cheong on 2013-03-21 12:40
Experiencing issues with my JLG 1600286 control for aerial work platform, looking for repair service as it's not functioning properly and affecting productivity on-site. Need someone reliable to fix this unit

—> Purchase or Repair:
#JLG by Rob / PSI Printing on 2016-12-05 12:03
need a quick heads-up. JLG AU3019 1600289 controller issue impacting drive or board. Urgent attention needed ASAP.

—> Purchase or Repair:
#JLG by CORBESCU on 2014-12-17 18:44
Can the JLG AU3019 1600258 Control Unit be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by bagheri on 2016-02-18 10:03
I've noticed that the JLG AU3019 1600289 is having an issue with its controller. It seems like something has stopped working properly. Would you be able to take a look at it and see what might be causing the problem?

—> Purchase or Repair:
#JLG by Rachel Nachum on 2013-07-23 19:32
Hello, could you please provide repair information for JLG 1600286 control for aerial work platform? Our equipment is down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG by Greg Needham on 2015-08-09 17:20
the JLG MOS 60 D 631/40077 DC Motor Controller on unit X went down mid-shift. Needs attention ASAP! Cheers, Night Shift Crew

—> Purchase or Repair:
#JLG by Mohmed Salim Yusuf S on 2014-10-31 11:57
I need someone to repair the Control Module on my JLG AU3019 1600289. The industrial unit is not responding or functioning properly.

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by Lynda on 2013-01-27 17:47
The JLG 1600286 is the control board for the unit that is currently not working. That's the information I have.

—> Purchase or Repair:
#JLG by Rajkumar on 2012-01-01 22:53
the JLG 1600346 PROA70481 power module is malfunctioning. Unit is currently not operational. Please troubleshoot and repair ASAP. Thanks!

—> Purchase or Repair:
#JLG by David Strodel on 2012-04-30 09:08
The JLG Smart System AU3019 controller is malfunctioning, causing a halt in production. We need immediate assistance to resolve this issue and get the production line back up and running. Please prioritize this repair to minimize downtime.

—> Purchase or Repair:
#JLG by bube on 2013-02-11 04:39
The JLG 1600286 control for one of the aerial work platforms in the warehouse is exhibiting unusual behavior. The unit is not responding as it typically does, and its actions are unpredictable and erratic. Would you be able to have a look and help us analyze the issue? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG Smart System by linda benton on 2010-07-22 21:45
JLG Smart System AU3019 1600286 not responding to any commands.

—> Purchase or Repair:
#JLG by Alsaadon on 2014-08-10 08:10
Control Module on JLG AU3019 1600258 not responding, halting all operations.

—> Purchase or Repair:
#JLG by MOINUDDIN on 2012-08-24 11:09
There's an issue with the controller on JLG AU3019 1600286. A drive or board just failed, need to investigate and repair as soon as possible.

—> Purchase or Repair:
#JLG by Jacques Phillips on 2014-08-11 15:05
Hello, I'm interested in purchasing a JLG 59110003 1600292 Power Supply. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by SeekersISeek on 2013-08-17 01:01
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by Jeiner Jhampier Riofrio Zapata on 2015-07-22 21:43
Hi team, the JLG AU3019 1600286 is down due to a Smart System drive issue. Needs attention ASAP. Thanks!

—> Purchase or Repair:
#JLG by pierre valiquette on 2013-04-14 05:31
The JLG 1600286 controller is not functioning as usual. It is exhibiting abnormal behavior that I have not witnessed before.

—> Purchase or Repair:
#JLG Smart System by brusselle on 2010-11-20 08:54
Do you have a JLG Smart System AU3019 1600286 available for sale or repair? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#JLG by MONTGOMERY on 2013-07-17 08:44
Experiencing issues with JLG 1600286 control board, not functioning properly. Need assistance to repair industrial unit. Thank you in advance for your help.

—> Purchase or Repair:
#JLG by Forbes on 2015-08-10 21:20
The JLG AU3019 1600258 is showing error code E124 on the controller, preventing the equipment from operating properly. Please advise on the next steps to resolve this issue

—> Purchase or Repair:
#JLG by SWAIN on 2013-06-11 20:43
Can this JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#JLG by girish vyas on 2016-12-14 22:56
The JLG AU3019 1600289 controller is malfunctioning, causing a halt in the production line. We need immediate repair service to address this issue and get the production moving again swiftly.

—> Purchase or Repair:
#JLG by Lai, Cheuk Kuen on 2013-03-16 15:15
The JLG 1600286 controller in the warehouse is exhibiting unusual behavior. It is not functioning as per its normal operations.

—> Purchase or Repair:
#JLG by felipe m. cruz on 2014-09-06 16:20
The JLG 1600286 controller is not responding to any commands.

—> Purchase or Repair:
#JLG by Slobodan on 2013-01-20 23:20
Hello, I'm interested in purchasing a JLG 1600286 controller. I'm not entirely sure if this is the right model, but I was advised to inquire with you. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by The on 2013-08-21 20:32
Please advise if the JLG 1600286 is still supported or if replacement parts are available. We are looking for a repair option for this control unit used in an older aerial work platform. Thank you.

—> Purchase or Repair:
#JLG by Taborda on 2014-07-30 07:24
Control module of JLG AU3019 1600289 is malfunctioning.

—> Purchase or Repair:
#JLG by Alberto Ruiz on 2014-02-18 20:12
I apologize for the inconvenience you're experiencing with your JLG AU3019 1600258 Control Unit. It seems like there might be an issue with its functionality, preventing it from operating as expected. I recommend contacting our technical support team for further assistance in diagnosing and resolvin…Purchase or Repair: Ticket Image...
Show More
#JLG by Michael Choi on 2014-08-10 03:10
I would recommend reaching out to JLG directly to inquire about the availability of replacement parts or repair options for the JLG 1600258 controller. They will be able to confirm if it is still supported and if parts are available for this older unit.

—> Purchase or Repair:
#JLG by Arvi Raud on 2013-02-07 18:18
My JLG 1600286 control panel is not responding, and we need it operational as soon as possible at our worksite. Please let me know if you can repair it

—> Purchase or Repair:
#JLG by Salter on 2014-11-26 13:14
Could you please confirm if the JLG 59110003 1600292 Power Supply model is still supported or if replacement parts are available? We need to determine the best course of action for repair or replacement. Thank you.

—> Purchase or Repair:
#JLG by Close on 2013-07-04 00:39
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#JLG by MANISH GANDHI on 2013-08-12 07:35
I need urgent assistance with JLG 1600286 control for the aerial work platform. The unit is still down. Please reply

—> Purchase or Repair:
#JLG by jiang on 2012-05-03 09:18
The JLG AU3019 1600286 controller is malfunctioning. It is not responding as expected and displaying unusual behavior.

—> Purchase or Repair:
#JLG by divya on 2014-12-25 05:44
Do you have a replacement JLG 59110003 Power Supply available for purchase or repair? Our unit went down, and it's crucial to keep our production running smoothly. Thank you.

—> Purchase or Repair:
#JLG by Silvia on 2012-09-28 00:59
The JLG AU3019 1600286 is showing error code E123 and not responding to any commands. Equipment is completely unresponsive. Please advise on next steps to troubleshoot and repair.

—> Purchase or Repair:
#JLG by keaggy on 2015-02-27 08:07
Hi, I need assistance with the JLG AU1830 631/40038. The equipment is displaying error code E322. Would appreciate guidance in resolving this issue

—> Purchase or Repair:
#JLG by Lindberg on 2012-02-12 16:14
Please provide me with more information about the JLG 1600346 PROA70481 power module. I'm trying to locate a possible replacement or repair option for this unit, but need to know if it is still supported or if parts are available. Thank you.

—> Purchase or Repair:
#JLG by Klaus Ullmann on 2013-08-15 17:01
Hello, I hope you're doing well. I'm interested in purchasing a JLG 7013310 631/40038 DC motor controller. Could you please provide me with information regarding the pricing and availability of this unit? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by sergio rojas on 2012-03-19 16:29
The JLG Smart System AU3019 controller is displaying error code E326, preventing the machine from starting up.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.