JLG Service & Repair Forum

JLG 1600286 control panel not responding, platform not moving.

—> Purchase or Repair: Ticket Image

— Posted by Dierickx on 2013-06-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Ian Graves on 2013-11-02 01:52
The JLG 1600286 is not functioning. Please check and repair as needed.

—> Purchase or Repair:
#JLG by saif on 2015-07-11 07:20
Drive failure on JLG AU3019 (SN 1600286) with Smart System drive. Need urgent attention from maintenance team.

—> Purchase or Repair:
#JLG by keaggy on 2012-12-27 23:33
Hello, could you please provide repair information for the JLG AU3019 Controller with serial number 1600286? It has stopped working, and we need a replacement. Thank you.

—> Purchase or Repair:
#JLG by Latsch on 2014-05-01 10:20
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.

—> Purchase or Repair:
#JLG by amar nath chanda on 2013-08-15 08:32
The JLG 1600286 is a control unit used for an aerial work platform. It's currently not functioning, and the maintenance team needs to address the issue.

—> Purchase or Repair:
#JLG by mohsen on 2012-09-12 13:44
Are you able to repair or provide a replacement power module for JLG part number 1600346 PROA70481? We need to keep production running smoothly.

—> Purchase or Repair:
#JLG by Bhupendra on 2014-05-05 03:20
Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Throngpon on 2012-05-28 16:06
The JLG 1600346 PROA70481 is showing error code 47 indicating a power module issue. The equipment is completely non-operational. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by girish vyas on 2016-12-14 22:56
The JLG AU3019 1600289 controller is malfunctioning, causing a halt in the production line. We need immediate repair service to address this issue and get the production moving again swiftly.

—> Purchase or Repair:
#JLG by ray bellamy on 2015-08-12 00:20
I'm experiencing an issue with the JLG E300AJP 1600292 where something seems to have stopped working. I'm uncertain about the specific problem since I'm not familiar with the model, but I wanted to address this concern

—> Purchase or Repair:
#JLG by mortezazadeh on 2015-08-15 13:20
I believe the DC Motor Controller on your JLG AU1830 631/40038 may be malfunctioning, causing the machine to stop working properly. I recommend having a technician inspect and diagnose the issue to determine the best course of action for repairs. Let me know if you need further assistance. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Anhishek Agarwal on 2013-07-22 20:32
Need assistance with JLG Smart System 1600258 for an aerial work platform. The controller seems unresponsive, and we require urgent repairs. Please reach out if you can help.

—> Purchase or Repair:
#JLG by MEHRABAN on 2015-07-24 01:20
The JLG AU1830 631/40038, which is a DC Motor Controller, experienced a failure causing downtime. This issue occurred at leading to disruptions in operations. Please provide a quick overview of what happened before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by Compton on 2012-06-02 13:20
Need assistance with a JLG AU3019 1600286 controller. Unit not functioning properly, require repair service. Thank you.

—> Purchase or Repair:
#JLG by Palmer on 2012-11-30 07:39
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.

—> Purchase or Repair:
#JLG by Reid on 2013-10-18 10:11
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Immediate repair is necessary to resume operations.

—> Purchase or Repair:
#JLG by Colic on 2015-07-16 09:20
Hello, do you have a JLG AU3019 1600286 Smart System drive available for sale or repair? We need to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Scott Poulos on 2013-07-17 22:44
Hello, I am interested in getting more information about part number JLG 1600286, which is a controller. Can you please provide details regarding this part and the common issues associated with it? Thank you.

—> Purchase or Repair:
#JLG by Winburn on 2013-08-14 15:32
Hello, I am reaching out on behalf of a client who is in need of assistance with a JLG 1600286 controller. Could you please provide me with information on how to troubleshoot and repair this part? Thank you.

—> Purchase or Repair:
#JLG Smart System by MOHAMMED ALAMGIR on 2008-02-11 23:31
I need immediate assistance with the JLG Smart System AU3019 1600258 controller. The unit is still down. Please respond

—> Purchase or Repair:
#JLG by Amr Salama on 2013-03-05 01:49
The JLG 7013310 631/40038 equipment is displaying error code E205. The DC motor is not responding and the equipment is unable to move. Please advise on troubleshooting steps or repairs needed to restore functionality.

—> Purchase or Repair:
#JLG by Arnie van der Est on 2015-08-03 20:20
The JLG E300AJP 1600292 is currently showing error code 1014 and is unable to articulate. Please advise on troubleshooting steps or repair needed. Thank you.

—> Purchase or Repair:
#JLG by SHEET on 2013-06-02 16:27
Please provide an update on the status of the JLG 1600286 control for the aerial work platform. It remains inoperable, and we urgently require assistance. Your

—> Purchase or Repair:
#JLG by Rachel Nachum on 2013-07-23 19:32
Hello, could you please provide repair information for JLG 1600286 control for aerial work platform? Our equipment is down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG by akash patil on 2013-08-22 12:32
Just had a failure on JLG 1600286 control board. Need a replacement ASAP. Heading to next machine now.

—> Purchase or Repair:
#JLG by Damandeep singh on 2005-12-21 00:00
The JLG 17400700 controller is not responding to any commands. Production is stalled until the controller issue is resolved.

—> Purchase or Repair:
#JLG by Joe Stacy on 2015-08-18 17:25
The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!

—> Purchase or Repair:
#JLG by connell on 2015-08-05 21:20
Hello, do you have a JLG AU3019 1600258 controller available for sale or repair? Our production has been affected, and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Svein Eirik Olsen on 2014-11-03 04:57
heads up. Just found an issue with the JLG 1600292 controller, looks like one of the drives or boards just failed. Will investigate further.

—> Purchase or Repair:
#JLG by jawed on 2014-12-23 08:06
The JLG 59110003 1600292 power supply unit experienced a malfunction earlier today, causing downtime on the shift. Can you provide me with a brief explanation of what went wrong and when it occurred? I need to address this issue before the next shift starts.

—> Purchase or Repair:
#JLG by Cumings on 2012-03-24 12:17
Hey, the JLG Smart System AU3019 controller is malfunctioning, halting production on the line. Need urgent repair service to address the issue immediately.

—> Purchase or Repair:
#JLG by Nate on 2012-05-14 20:30
My JLG AU3019 1600286 controller is malfunctioning, and I need it fixed urgently to resume operations. Looking for a reliable repair service to address the issue

—> Purchase or Repair:
#JLG by Rajagopal Mahesh on 2012-06-22 01:07
The power module labeled JLG 1600346 PROA70481 is exhibiting abnormal behavior in the warehouse. It is not performing its usual functions as expected.

—> Purchase or Repair:
#JLG by Brodersen on 2014-12-23 17:44
the JLG 1600286 controller went down mid-shift. Kindly check and fix during the day. Thanks!

—> Purchase or Repair:
#JLG by Tien Pham on 2015-07-12 10:20
Can the Smart System drive on the JLG AU3019 1600286 be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by nathan newbern on 2012-07-27 17:19
The power module (JLG 1600346 PROA70481) is malfunctioning, causing a halt in production. We urgently need repairs to get the line moving again swiftly.

—> Purchase or Repair:
#JLG by Seje on 2013-08-13 21:32
Control board on JLG 1600286 just went down, drive system affected. Need urgent repair.

—> Purchase or Repair:
#JLG by Fábio on 2013-04-18 12:48
The JLG 1600286 controller unit is not functioning properly. Maintenance team needs to check and possibly repair it.

—> Purchase or Repair:
#JLG by SACHIN JOHN on 2012-03-12 11:55
The JLG Smart System AU3019 controller is malfunctioning, causing downtime on the production line. It urgently needs repair to restore operations

—> Purchase or Repair:
#JLG by blade-studentKl on 2012-11-21 04:47
The JLG 1600346 PROA70481 power module is not performing normally. It is exhibiting strange behavior that is unusual for its regular operations.

—> Purchase or Repair:
#JLG by Hosawi on 2014-03-25 04:30
The JLG AU3019 1600289 is down due to a faulty Control Module. Needs to be checked and replaced as soon as possible. Thanks!

—> Purchase or Repair:
#JLG Smart System by Waldyr on 2008-01-24 20:48
Hello, I am inquiring about the JLG Smart System AU3019 1600258. My client is experiencing issues with the controller. Can you please provide more information on repair options and estimated costs? Thank you.

—> Purchase or Repair:
#JLG by subhashis bag on 2022-02-28 20:18
The Smart System Control on JLG 1600286 is malfunctioning, causing a complete halt in production. This issue needs immediate attention from your repair service to get the line up and running again as soon as possible.

—> Purchase or Repair:
#JLG by Jack Starr on 2013-08-10 14:35
Control board in JLG 1600286 malfunctioning, preventing machine operation.

—> Purchase or Repair:
#JLG by saillet sebastien on 2012-10-12 09:15
Please urgently provide an update on the status of the JLG 1600346 PROA70481 power module as the unit is still down. It is crucial that we have a response this time. Thank you.

—> Purchase or Repair:
#JLG by Luis Buena on 2012-08-05 23:24
Hello, I need repair info for a JLG 1600346 PROA70481 Power module that stopped working. Can you provide guidance on how to fix or replace it ASAP? Thank you.

—> Purchase or Repair:
#JLG by Abby on 2015-04-14 23:18
I'm experiencing an issue with the JLG AU1830 631/40038, specifically with the DC Motor Controller. It seems like something has stopped working, but I'm not sure exactly what the problem is. I would appreciate any assistance or advice you can provide to help troubleshoot and resolve this issue. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by elkin garces on 2014-11-02 16:57
Our JLG AU3019 1600289 Control Module is still down. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Cheri on 2013-09-12 09:28
Hey, the JLG 1600286 control board went out mid-shift. Needs attention ASAP. Please check it first thing in the morning. Thanks!

—> Purchase or Repair:
#JLG by Lazar on 2015-07-22 07:20
The JLG 7013310 631/40038 DC Motor Controller is not working as reported.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.