JLG Service & Repair Forum

My JLG Smart System 1600258 controller is malfunctioning, and I need to find a technician who can repair it as soon as possible. The unit is not responding to any commands, causing delays in our work.

—> Purchase or Repair: Ticket Image

— Posted by Nooprasit on 2013-08-17

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by bube on 2013-02-11 04:39
The JLG 1600286 control for one of the aerial work platforms in the warehouse is exhibiting unusual behavior. The unit is not responding as it typically does, and its actions are unpredictable and erratic. Would you be able to have a look and help us analyze the issue? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Rajkumar on 2012-01-01 22:53
the JLG 1600346 PROA70481 power module is malfunctioning. Unit is currently not operational. Please troubleshoot and repair ASAP. Thanks!

—> Purchase or Repair:
#JLG by Witt on 2015-07-05 16:58
The JLG MOS 60 D 631/40077 DC Motor Controller unit is not working.

—> Purchase or Repair:
#JLG by DAVID LEHMANN /ZIONS on 2013-07-25 06:32
We urgently need assistance with the JLG 7013310 631/40038 DC motor controller. Our unit is still down. Please respond

—> Purchase or Repair:
#JLG by Alex Gracia on 2013-04-18 21:48
Do you have a replacement DC motor controller available for JLG 7013310 631/40038 to keep production running?

—> Purchase or Repair:
#JLG by Lynda on 2013-01-27 17:47
The JLG 1600286 is the control board for the unit that is currently not working. That's the information I have.

—> Purchase or Repair:
#JLG by Shaji on 2014-01-18 09:45
Do you have a JLG 1600258 controller available for sale or repair? Need to keep production running, let me know, thanks.

—> Purchase or Repair:
#JLG by Cordova on 2013-07-18 11:44
Could you please verify if the JLG 1600286 control board is still supported or if replacement parts are available? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:
#JLG by ASHIS MANDAL on 2013-10-11 11:42
The JLG 1600286 control board is not working and needs attention.

—> Purchase or Repair:
#JLG by SHEET on 2013-06-02 16:27
Please provide an update on the status of the JLG 1600286 control for the aerial work platform. It remains inoperable, and we urgently require assistance. Your

—> Purchase or Repair:
#JLG by pedram on 2015-08-03 21:20
The JLG AU3019 1600258 controler is malfunctioning, causing delays in production. Please address this issue immediately to resume operations smoothly.

—> Purchase or Repair:
#JLG by mark corby on 2012-08-05 17:24
Hello, I am interested in purchasing the JLG 1600346 PROA70481 power module for quick sourcing. Could you please provide me with information regarding pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by Tanyadol on 2012-10-12 11:15
JLG AU3019 1600286 controller not responding, preventing machine operation.

—> Purchase or Repair:
#JLG by Bob Cramsie on 2014-03-15 05:43
The unit with part number JLG 59110003 and serial number 1600292 appears to be a power supply. It's not working and needs maintenance.

—> Purchase or Repair:
#JLG by JOSE VALDES on 2014-11-03 03:57
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Luis Buena on 2012-08-05 23:24
Hello, I need repair info for a JLG 1600346 PROA70481 Power module that stopped working. Can you provide guidance on how to fix or replace it ASAP? Thank you.

—> Purchase or Repair:
#JLG by Palmer on 2012-11-30 07:39
We're experiencing issues with the power module on the JLG 1600346 PROA70481. It needs immediate attention to prevent further disruption to the production line. Please prioritize this repair to ensure that operations can resume smoothly. Thank you.

—> Purchase or Repair:
#JLG by keaggy on 2012-12-27 23:33
Hello, could you please provide repair information for the JLG AU3019 Controller with serial number 1600286? It has stopped working, and we need a replacement. Thank you.

—> Purchase or Repair:
#JLG by sergio rojas on 2012-03-19 16:29
The JLG Smart System AU3019 controller is displaying error code E326, preventing the machine from starting up.

—> Purchase or Repair:
#JLG by SANTOS NICOLAS CELY B on 2013-05-17 13:54
The JLG 7013310 631/40038 DC motor controller experienced an issue causing downtime. Please provide details on what happened and when the incident occurred. Your

—> Purchase or Repair:
#JLG by Kevin Marx on 2015-07-27 17:20
The JLG E300AJP 1600292 isn't working.

—> Purchase or Repair:
#JLG by maneesh sharma on 2016-05-31 21:22
We are still waiting for a response regarding the JLG AU3019 1600289 controller. The unit remains inoperable. Please reply

—> Purchase or Repair:
#JLG by Swartos on 2013-08-13 05:35
I need assistance with JLG part number 1600286, which is a Controller. My client is experiencing issues with it. Please provide information on how to resolve this problem. Thank you.

—> Purchase or Repair:
#JLG by Wolff on 2014-03-15 17:43
Hello, I am interested in purchasing the JLG AU3019 1600258 Control Unit. Could you please confirm the pricing and availability for this model? I am looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by akram on 2014-01-03 04:00
Hello, I'm looking for assistance with a JLG AU3019 part number 1600289 described as a Control Module. Can you provide information regarding troubleshooting or potential solutions for this item? Thank you.

—> Purchase or Repair:
#JLG by Reid on 2013-10-18 10:11
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Immediate repair is necessary to resume operations.

—> Purchase or Repair:
#JLG by dmitriy on 2013-03-01 11:39
Hello, do you have a JLG Smart System 1600258 available for sale or repair? Our production is currently down and we need a replacement as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Gruhl on 2013-08-18 00:32
We encountered an issue with the JLG Smart System 1600258 controller for our aerial work platform earlier today, causing downtime from 230 PM to 345 PM. Could you please provide some insights on what might have caused this malfunction? We need to have this resolved before the next shift. Thank you. …Purchase or Repair: Ticket Image...
Show More
#JLG by QUINONEZ on 2013-05-29 07:02
The JLG 7013310 631/40038 is showing error code E324. Equipment is not responding to controls. Please advise next steps for troubleshooting and repair.

—> Purchase or Repair:
#JLG by Gerald Harman on 2014-12-20 16:44
The JLG AU3019 1600258 unit is not functioning properly. It is described as a Control Unit. That's all the information I have at the moment.

—> Purchase or Repair:
#JLG by mano on 2013-08-19 18:32
The DC motor controller (JLG 7013310 631/40038) is exhibiting unusual behavior, not performing as it normally does. It requires further inspection to diagnose the issue accurately.

—> Purchase or Repair:
#JLG by Pavle on 2012-07-14 18:56
The power module on JLG 1600346 PROA70481 is malfunctioning, causing a halt in production. Urgent repair service is needed to restore operations swiftly.

—> Purchase or Repair:
#JLG by Lindberg on 2012-02-12 16:14
Please provide me with more information about the JLG 1600346 PROA70481 power module. I'm trying to locate a possible replacement or repair option for this unit, but need to know if it is still supported or if parts are available. Thank you.

—> Purchase or Repair:
#JLG by Ron Wilson on 2015-08-09 21:20
Could you please provide details or an update on the repair status for part number AU1830 631/40038, which is a DC Motor Controller? Thank you!

—> Purchase or Repair:
#Jlg Curtis Instruments by bllessinger on 2016-01-06 10:03
Hello, I am in need of a replacement Jlg Curtis Instruments 17400700 joystick for production. Do you have any available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by felipe m. cruz on 2014-09-06 16:20
The JLG 1600286 controller is not responding to any commands.

—> Purchase or Repair:
#JLG by Solomon on 2013-08-20 23:32
We experienced downtime with JLG 7013310 631/40038, a DC motor controller. It happened earlier during this shift. Could you please provide some insight into what may have caused the issue? Thank you.

—> Purchase or Repair:
#JLG by Petre Pistol on 2014-12-13 02:16
Control Module on JLG AU3019 1600258 is unresponsive, preventing machine operation.

—> Purchase or Repair:
#JLG by tony williams c/o ft on 2014-07-02 10:57
The JLG 1600292 controller is exhibiting unusual behavior in the warehouse unit.

—> Purchase or Repair:
#JLG by broder on 2012-08-05 14:24
Hello, I am reaching out to inquire about the JLG Smart System AU3019 controller. We are looking for information on whether this unit is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by Al Aguiniga on 2015-07-19 20:20
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!

—> Purchase or Repair:
#JLG by Nikesh on 2014-05-04 12:20
Please help me locate a replacement or repair option for JLG 1600286 Controller. It's an older unit, and we're unsure of the manufacturer. Could you please confirm if it's still supported or if parts are available for it? Thank you.

—> Purchase or Repair:
#JLG by Joe Stacy on 2015-08-18 17:25
The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!

—> Purchase or Repair:
#JLG by Scott Anctil on 2012-06-07 23:32
JLG AU3019 1600286 controller not responding.

—> Purchase or Repair:
#JLG by Fábio on 2013-04-18 12:48
The JLG 1600286 controller unit is not functioning properly. Maintenance team needs to check and possibly repair it.

—> Purchase or Repair:
#JLG by post on 2015-05-27 00:54
Hi, the JLG AU1830 631/40038 is displaying error code E123. Equipment is not responding to controller input. Please advise on next steps to troubleshoot and resolve the issue.

—> Purchase or Repair:
#JLG by Rodney William on 2012-02-01 03:56
just a heads up that the JLG Smart System AU3019 controller went down mid-shift. Please check and troubleshoot it first thing in the morning. Thanks!

—> Purchase or Repair:
#JLG by moss on 2014-02-12 01:58
The JLG 1600286 controller is malfunctioning, leading to critical downtime on the production line. Urgent repair is needed to ensure operations resume

—> Purchase or Repair:
#JLG by Khalid on 2013-02-24 22:40
Hello, I hope this message finds you well. I am reaching out regarding the JLG 1600286 control board. Our team is currently looking to locate a replacement or repair option for this unit, but we are unsure of the manufacturer since it's an older model. Could you please confirm if this unit is still …Purchase or Repair: Ticket Image...
Show More
#JLG by Rick Blankenship on 2013-04-30 13:33
Hello, I am contacting you on behalf of a client who is experiencing issues with part number JLG 1600286, which appears to be the controller. Could you please provide more information on possible repairs or replacements for this part? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.