JLG Service & Repair Forum

Hey, the JLG 7013310 631/40038 DC motor controller went down mid-shift. Please check it out asap tomorrow. Thanks!

—> Purchase or Repair: Ticket Image

— Posted by Ahmad Omidi on 2013-09-11

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Joe Stacy on 2015-08-18 17:25
The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!

—> Purchase or Repair:
#JLG Smart System by VIVEK AGARWAL on 2010-08-19 15:30
Hello, I'm reaching out on behalf of my client regarding JLG Smart System AU3019 (Part Number 1600286). They are experiencing issues with the Aerial Work Platforms Controller and require assistance. Please let me know if you need any further information to help diagnose and repair the problem. Thank…Purchase or Repair: Ticket Image...
Show More
#JLG by rosemary ortiz on 2012-09-20 22:49
I would recommend reaching out to JLG directly to inquire about support and replacement parts availability for the AU3019 Smart System Controller.

—> Purchase or Repair:
#JLG by Kendall Bailey, Nnor on 2013-08-11 08:32
Can the JLG 1600286 control for the aerial work platform be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Bratsburg on 2014-07-01 20:57
Unit JLG 59110003 with serial number 1600292 is down due to power supply issue. Needs attention ASAP.

—> Purchase or Repair:
#JLG by Rodney William on 2012-02-01 03:56
just a heads up that the JLG Smart System AU3019 controller went down mid-shift. Please check and troubleshoot it first thing in the morning. Thanks!

—> Purchase or Repair:
#JLG by Felipe on 2013-08-11 08:35
Hello, my JLG Smart System 1600258 is displaying error code E450. The platform is not extending properly, and there is a constant beeping alarm. Please advise on how to resolve this issue. Thank you.

—> Purchase or Repair:
#JLG by subhashis bag on 2022-02-28 20:18
The Smart System Control on JLG 1600286 is malfunctioning, causing a complete halt in production. This issue needs immediate attention from your repair service to get the line up and running again as soon as possible.

—> Purchase or Repair:
#JLG by Kathleen Kosman on 2014-12-22 17:06
Could you please confirm if the JLG 1600292 controller can be repaired or if it needs to be replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Audre Chay on 2015-08-01 13:20
Can the JLG AU3019 1600258 CONTROLER be repaired or bought? I'm looking to check this off my to-do list.

—> Purchase or Repair:
#JLG by Kim Hughes on 2008-01-17 10:14
Hello, I'm reaching out on behalf of my client who has a JLG AU3019 1600258 Smart System Controller that needs repair. We are looking for assistance in diagnosing and fixing the issue. Can you please provide us with more information on how we can proceed with getting this repaired? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#JLG by David Burgos on 2012-04-27 23:08
Can the JLG Smart System AU3019 Controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by espindola on 2015-07-06 13:58
I'm experiencing some issues with the JLG MOS 60 D 631/40077. It seems like the DC Motor Controller is not working properly. It might be best to have a technician look into it to determine the exact problem.

—> Purchase or Repair:
#JLG by Jonathan Tomlinson on 2015-06-22 19:12
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.

—> Purchase or Repair:
#JLG by nathan newbern on 2012-07-27 17:19
The power module (JLG 1600346 PROA70481) is malfunctioning, causing a halt in production. We urgently need repairs to get the line moving again swiftly.

—> Purchase or Repair:
#JLG by Wingo Kwok on 2012-11-24 03:28
The JLG AU3019 1600286 controller malfunctioned yesterday afternoon around 330 pm, resulting in significant downtime. Could you please provide an update on the situation before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by Casella on 2014-02-18 10:12
I'm sorry to hear that your JLG AU3019 1600258 Control Module is not working properly. It seems like something may have malfunctioned. It might be best to consult a professional technician for a proper diagnosis and fix.

—> Purchase or Repair:
#JLG by Colic on 2015-07-16 09:20
Hello, do you have a JLG AU3019 1600286 Smart System drive available for sale or repair? We need to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Bhupendra on 2014-05-05 03:20
Can I repair or buy a replacement for the JLG 1600292 controller? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by jiang on 2012-05-03 09:18
The JLG AU3019 1600286 controller is malfunctioning. It is not responding as expected and displaying unusual behavior.

—> Purchase or Repair:
#JLG by Questo on 2015-07-09 10:31
JLG E300AJP 1600292 showing error message "Platform Controls Fail" and not responding to any commands.

—> Purchase or Repair:
#JLG by SHANE STOCKTON on 2015-07-15 23:20
The JLG AU3019 1600286 experienced a drive or board failure in the Smart System. Diagnostics and repair are required.

—> Purchase or Repair:
#JLG by Valeria Sharova on 2014-12-17 19:44
Hi, we have a JLG 59110003 1600292 power supply that stopped working. Can you please provide repair info or a replacement? Your quick response is appreciated. Thanks!

—> Purchase or Repair:
#JLG by Al Aguiniga on 2015-07-19 20:20
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!

—> Purchase or Repair:
#JLG by JOEL LEVIN on 2013-07-10 12:32
Hi there, we're currently in need of repair info for a JLG 1600286 controller. Could you please provide details on where we can find a replacement quickly? Thank you.

—> Purchase or Repair:
#JLG by Silvia on 2012-09-28 00:59
The JLG AU3019 1600286 is showing error code E123 and not responding to any commands. Equipment is completely unresponsive. Please advise on next steps to troubleshoot and repair.

—> Purchase or Repair:
#JLG by JOSE VALDES on 2014-11-03 03:57
Could you please confirm if the JLG AU3019 1600258 Control Module is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by maneesh sharma on 2016-05-31 21:22
We are still waiting for a response regarding the JLG AU3019 1600289 controller. The unit remains inoperable. Please reply

—> Purchase or Repair:
#JLG by Callaghan on 2013-05-16 17:54
Can this JLG 1600286 control board be repaired or purchased? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Jamessaw on 2014-12-26 05:27
The JLG 1600258 controller unit is not working.

—> Purchase or Repair:
#JLG by Rafal on 2014-12-26 15:06
We still have an unresolved issue with the JLG 1600286 controller. Please provide an update or action plan

—> Purchase or Repair:
#JLG by Chad Hulse on 2014-05-06 07:20
Hello, I am following up again regarding the JLG AU3019 1600289 Control Module issue. The unit is still down. Please provide an update at your earliest convenience. Thank you.

—> Purchase or Repair:
#JLG by James Moore on 2012-06-19 01:42
I need assistance with JLG part number 1600346 PROA70481, described as a power module. Please provide more information regarding this component. Thank you.

—> Purchase or Repair:
#JLG by sonnico elsisura on 2014-02-17 11:58
Currently experiencing a malfunction on the production line attributed to a faulty JLG 1600258 controller. Urgent attention and repair needed to resume operations

—> Purchase or Repair:
#JLG by VIPIN on 2013-08-14 16:32
The JLG 1600286 is showing error code E002 on the control board, causing the equipment to be non-operational. Please advise on troubleshooting steps or repairs needed to get it back up and running. Thank you.

—> Purchase or Repair:
#JLG by Pakpoom on 2013-07-16 06:44
I need repair service for a JLG 7013310 631/40038 DC motor controller. It seems to be malfunctioning and impacting our operations. Thank you.

—> Purchase or Repair:
#JLG by oladua on 2016-12-02 11:00
JLG AU3019 1600289 controller is malfunctioning, causing a significant production line slowdown. Immediate repair is crucial to minimize downtime and resume operational efficiency. Please prioritize resolving this issue

—> Purchase or Repair:
#JLG by ENG AHMED MARZOUK on 2013-12-06 06:48
Do you have a JLG 7013310 631/40038 DC motor controller available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Cheong on 2013-03-21 12:40
Experiencing issues with my JLG 1600286 control for aerial work platform, looking for repair service as it's not functioning properly and affecting productivity on-site. Need someone reliable to fix this unit

—> Purchase or Repair:
#JLG by Luchyk on 2013-08-08 08:32
Hello, we have a JLG Smart System 1600258 controller for an aerial work platform that has stopped working. We need a replacement but cannot find one. Can you provide repair information for this? Thank you.

—> Purchase or Repair:
#JLG by Drouillard on 2012-05-16 21:53
Hello, I'm reaching out on behalf of a client who needs assistance with a JLG 1600346 PROA70481 power module. Could you please provide information on troubleshooting and repairing this part? Thank you.

—> Purchase or Repair:
#JLG by John Casper on 2013-07-26 00:32
The maintenance team reported an issue with JLG 1600286, which is the control for the aerial work platform.

—> Purchase or Repair:
#JLG by Tom Spence on 2012-09-20 02:15
The JLG AU3019 1600286 controller is not working.

—> Purchase or Repair:
#JLG by Jabes on 2015-07-27 16:20
It seems like there might be an issue with the controller on your JLG AU3019 1600258. It's not working as expected. I recommend having a professional technician take a look to diagnose the problem accurately.

—> Purchase or Repair:
#JLG Smart System by sakkinen on 2008-02-04 00:33
I need assistance with my JLG Smart System AU3019 1600258 controller. Our unit is down, and I need to keep production running. Do you have one available for repair or sale?

—> Purchase or Repair:
#JLG by Burdges on 2015-07-11 17:32
We are experiencing issues with the DC motor controller (JLG 7013310 631/40038) on the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:
#JLG by Sheila Del Padre on 2012-11-02 08:45
The JLG Smart System AU3019 controller in the warehouse is not functioning normally. It is exhibiting erratic behavior and not responding as expected.

—> Purchase or Repair:
#JLG by md.ali hossain khan on 2013-05-14 13:48
Hi, the JLG 1600286 isn't responding when attempting to raise or lower the platform. No error code is displaying, but the controls seem unresponsive. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#JLG by charles dickson on 2013-08-10 14:32
Can this JLG 1600286 control for the aerial work platform be repaired or replaced? I am trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Jack Starr on 2013-08-10 14:35
Control board in JLG 1600286 malfunctioning, preventing machine operation.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.