JLG Service & Repair Forum

The Control Module on JLG AU3019 1600258 is malfunctioning, impacting the production line. Urgent repair service is needed to restore operations

—> Purchase or Repair: Ticket Image

— Posted by Frode on 2014-07-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by floyd mora on 2014-02-11 04:04
Please provide the necessary details about the JLG 1600286 Controller. We need to check if it is still supported or if parts are available for replacement or repair options. Thank you.

—> Purchase or Repair:
#JLG by GLENN SUYDAM on 2012-03-20 12:32
Machine displaying error code "E-Stop Activated" and not responding to any commands.

—> Purchase or Repair:
#JLG by JITENDRA on 2015-03-07 09:15
I was informed that the JLG MOS 60 D 631/40077 is a DC Motor Controller unit that is currently not working.

—> Purchase or Repair:
#JLG by ANGELOS on 2014-09-04 15:02
the JLG 59110003 1600292 power supply went down mid-shift. Needs attention and repair ASAP. Cheers!

—> Purchase or Repair:
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by Amrit Pal Singh on 2013-08-22 23:32
Do you have a JLG 1600286 control board available for sale or repair? We need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Stefanik on 2015-07-19 13:20
I am following up on my previous message regarding the JLG 7013310 631/40038 DC Motor Controller. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:
#JLG by kuberski on 2015-07-08 23:14
The controler for JLG AU3019 with serial number 1600258 is malfunctioning, affecting the production line. We need urgent repair service to resolve the issue

—> Purchase or Repair:
#JLG by Steven Anderson on 2014-03-25 13:30
Hello, I'm reaching out about a JLG AU3019 1600258 Control Unit that stopped working. We need a replacement ASAP but are having trouble finding one. Can you provide repair information or guide us to where we can find the part quickly? Thank you.

—> Purchase or Repair:
#JLG by tony williams c/o ft on 2014-07-02 10:57
The JLG 1600292 controller is exhibiting unusual behavior in the warehouse unit.

—> Purchase or Repair:
#JLG by dmitriy on 2013-03-01 11:39
Hello, do you have a JLG Smart System 1600258 available for sale or repair? Our production is currently down and we need a replacement as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Mihael on 2008-11-10 18:10
Hello, this is a follow-up regarding the JLG AU3019 1600258 Smart System Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by Klaus Ullmann on 2013-08-15 17:01
Hello, I hope you're doing well. I'm interested in purchasing a JLG 7013310 631/40038 DC motor controller. Could you please provide me with information regarding the pricing and availability of this unit? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by ellis on 2015-08-12 02:20
The JLG AU3019 1600286 unit isn't working.

—> Purchase or Repair:
#JLG by Petko on 2015-01-06 21:41
Hello, I'm contacting you on behalf of my client who is experiencing issues with their JLG part number 7013310 631/40038, which is a DC Motor Controller. May I please get more information regarding repair options and lead time? Thank you.

—> Purchase or Repair:
#JLG by Scott Poulos on 2013-07-17 22:44
Hello, I am interested in getting more information about part number JLG 1600286, which is a controller. Can you please provide details regarding this part and the common issues associated with it? Thank you.

—> Purchase or Repair:
#JLG by post on 2015-05-27 00:54
Hi, the JLG AU1830 631/40038 is displaying error code E123. Equipment is not responding to controller input. Please advise on next steps to troubleshoot and resolve the issue.

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Rachel Nachum on 2013-07-23 19:32
Hello, could you please provide repair information for JLG 1600286 control for aerial work platform? Our equipment is down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG by HowardMef on 2013-02-26 11:28
The DC motor controller (JLG 7013310 631/40038) just failed, probably due to a faulty drive or board. I'll troubleshoot further once I reach the machine.

—> Purchase or Repair:
#JLG by MONTGOMERY on 2013-07-17 08:44
Experiencing issues with JLG 1600286 control board, not functioning properly. Need assistance to repair industrial unit. Thank you in advance for your help.

—> Purchase or Repair:
#JLG by Tim Peel on 2015-07-22 10:20
Can you repair my JLG E300AJP 1600292 or do you have another one available for sale? Production is on hold. Thank you.

—> Purchase or Repair:
#JLG by Raul Martinez on 2008-09-16 19:42
Could the JLG AU3019 1600258 Smart System Controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Squierpzr on 2013-07-26 12:32
Hey, the JLG Smart System 1600258 on Unit #123 malfunctioned this morning at 930 AM, causing downtime for the aerial work platform. Could you please let me know what went wrong and whether it has been resolved before the next shift comes in? Thank you.

—> Purchase or Repair:
#JLG by Ing Francisco Montero Gutierrez on 2012-12-18 00:13
My JLG Smart System AU3019 controller is malfunctioning and needs repair. It's not responding properly, causing a delay in our industrial operations. Need immediate assistance to get it fixed.

—> Purchase or Repair:
#JLG by End on 2015-03-16 19:25
JLG AU3019 1600258 is displaying Error Code 1234 - "Controller Malfunction". Equipment is unresponsive and not operating. Please advise on next steps for repair.

—> Purchase or Repair:
#JLG by Briggs on 2013-08-16 08:01
The JLG 1600286 is a controller that the maintenance team is having issues with. They are looking for assistance in troubleshooting the unit.

—> Purchase or Repair:
#JLG by Marc Nachtwey on 2015-01-09 06:41
Hello, do you have a JLG AU1830 631/40038 DC Motor Controller available for sale or repair? It's for urgent production needs. Thank you.

—> Purchase or Repair:
#JLG by Dennis McCollums on 2012-01-17 13:45
The JLG Smart System AU3019 controller is not working.

—> Purchase or Repair:
#JLG by George Kolacny on 2013-02-26 07:28
The JLG 1600286 controller is exhibiting unusual behavior in the warehouse. It is not performing its normal functions and acting strangely.

—> Purchase or Repair:
#JLG by saif on 2015-07-11 07:20
Drive failure on JLG AU3019 (SN 1600286) with Smart System drive. Need urgent attention from maintenance team.

—> Purchase or Repair:
#JLG by Grom on 2014-05-03 10:20
The control module on JLG AU3019 1600289 is behaving strangely - it is not functioning as it usually does. Please investigate the issue further.

—> Purchase or Repair:
#JLG by Ed Gutierrez on 2012-01-04 01:41
the JLG Smart System AU3019 controller for Unit 7 went down mid-shift. Please check and fix it during the day shift. Thanks!

—> Purchase or Repair:
#JLG by TC CHOU on 2015-08-15 07:20
Hi there, Could you please provide repair information for a JLG E300AJP 1600292 Articulator? Our machine has stopped working and we need a replacement part urgently. Thank you.

—> Purchase or Repair:
#JLG by Albayrak on 2015-08-13 03:20
Please provide me with more information about your JLG AU3019 1600258 controller unit so I can assist you in locating a replacement or repair option. I will check if it is still supported and if parts are available for it.

—> Purchase or Repair:
#JLG by Davidiconi on 2014-03-13 12:02
The JLG 1600286 is a controller unit that is currently not functioning as expected. Please have the maintenance team check it out.

—> Purchase or Repair:
#JLG by Jamil Ahmed on 2012-08-30 17:31
Controller for JLG AU3019 1600286 just failed. Need immediate diagnosis and replacement.

—> Purchase or Repair:
#JLG Smart System by Volau on 2010-09-03 04:13
Can the JLG Smart System AU3019 1600286 be repaired or replaced? Looking to check this off my to-do list.

—> Purchase or Repair:
#JLG by Cody Gillean on 2015-07-11 10:20
The JLG AU3019 1600286 is showing the error code 345. The Smart System drive is not responding, and the equipment is currently down. Please advise on next steps to troubleshoot and resolve the issue

—> Purchase or Repair:
#JLG by Ban on 2015-07-23 16:39
I need repair for my JLG 7013310 631/40038 DC Motor Controller as it is not functioning properly. Looking for someone who can diagnose and fix the issue

—> Purchase or Repair:
#JLG by Heckley on 2015-07-30 15:20
I'm currently experiencing an issue with the JLG E300AJP 1600292 machine. The articulator seems to have stopped working. Your attention to this matter would be greatly appreciated.

—> Purchase or Repair:
#JLG by Matthew on 2014-12-04 10:23
I need urgent assistance with my JLG AU3019 1600289. The Control Module needs attention, and the unit is still down. Please prioritize this issue and ensure someone gets back to me

—> Purchase or Repair:
#JLG by High Tech Alarms on 2013-08-01 00:32
The JLG 7013310 631/40038, a DC motor controller, led to downtime. Need quick clarification before the next shift.

—> Purchase or Repair:
#JLG by Tien Pham on 2015-07-12 10:20
Can the Smart System drive on the JLG AU3019 1600286 be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by pepet on 2014-11-18 13:25
Hello, I am looking to get the JLG 1600258 controller fixed or replaced. Could you please let me know if it can be repaired or if a new one needs to be purchased? It's on my to-do list, and I want to take care of it as soon as possible. Thank you!

—> Purchase or Repair:
#JLG by Gérald on 2015-07-13 01:20
Hello, I'm reaching out on behalf of a client with a JLG AU3019 1600286 equipped with a Smart System drive. The client is experiencing issues with the equipment and requires assistance. Can you please provide more information on possible solutions or repairs needed for this specific model? Thank you…Purchase or Repair: Ticket Image...
Show More
#JLG by Lai, Cheuk Kuen on 2013-03-16 15:15
The JLG 1600286 controller in the warehouse is exhibiting unusual behavior. It is not functioning as per its normal operations.

—> Purchase or Repair:
#JLG by Connerly on 2025-05-27 03:23
The JLG AU3019 1600289 controller is behaving abnormally in the warehouse.

—> Purchase or Repair:
#JLG by Gregory Momyer on 2016-02-18 13:03
The JLG AU3019 1600289 Smart System Controller unit is malfunctioning. It is displaying unusual behavior and not operating as expected. Please provide more details about the specific issues you are observing.

—> Purchase or Repair:
#JLG by Audre Chay on 2015-08-01 13:20
Can the JLG AU3019 1600258 CONTROLER be repaired or bought? I'm looking to check this off my to-do list.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.