JLG Service & Repair Forum

I would recommend reaching out to JLG directly to inquire about the availability of replacement parts or repair options for the JLG 1600258 controller. They will be able to confirm if it is still supported and if parts are available for this older unit.

—> Purchase or Repair: Ticket Image

— Posted by Michael Choi on 2014-08-10

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Slobodan on 2013-01-20 23:20
Hello, I'm interested in purchasing a JLG 1600286 controller. I'm not entirely sure if this is the right model, but I was advised to inquire with you. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Tim Peel on 2015-07-22 10:20
Can you repair my JLG E300AJP 1600292 or do you have another one available for sale? Production is on hold. Thank you.

—> Purchase or Repair:
#JLG by Joel Schambeau on 2014-12-18 15:44
JLG 1600292 controller malfunctioning, halting production line. Immediate repair needed to resume operations.

—> Purchase or Repair:
#JLG by md.ali hossain khan on 2013-05-14 13:48
Hi, the JLG 1600286 isn't responding when attempting to raise or lower the platform. No error code is displaying, but the controls seem unresponsive. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#JLG by Lynda on 2013-01-27 17:47
The JLG 1600286 is the control board for the unit that is currently not working. That's the information I have.

—> Purchase or Repair:
#JLG by EDOZIE on 2015-03-16 18:25
I'm following up on my previous message regarding the JLG 7013310 631/40038 DC Motor Controller. The unit is still down. I need a response as soon as possible.

—> Purchase or Repair:
#JLG by rosemary ortiz on 2012-09-20 22:49
I would recommend reaching out to JLG directly to inquire about support and replacement parts availability for the AU3019 Smart System Controller.

—> Purchase or Repair:
#JLG by MONTGOMERY on 2013-07-17 08:44
Experiencing issues with JLG 1600286 control board, not functioning properly. Need assistance to repair industrial unit. Thank you in advance for your help.

—> Purchase or Repair:
#JLG Smart System by Baig on 2008-11-29 13:47
The JLG Smart System AU3019 1600258 controller unit is not working.

—> Purchase or Repair:
#JLG by Walker on 2008-02-05 17:49
Hello, I'm inquiring about the JLG AU3019 (1600258) Smart System Controller. We are looking to find out if this unit is still supported and if replacement parts are available. Thank you.

—> Purchase or Repair:
#JLG by Solomon on 2013-08-20 23:32
We experienced downtime with JLG 7013310 631/40038, a DC motor controller. It happened earlier during this shift. Could you please provide some insight into what may have caused the issue? Thank you.

—> Purchase or Repair:
#JLG by sandoval on 2013-08-13 07:32
Could you please provide information on whether the JLG Smart System 1600258 is still supported and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#JLG by Ltd., on 2013-08-14 20:32
The JLG 1600286 control for the aerial work platform is malfunctioning and the unit went down mid-shift. Please have someone look into this issue. Thank you!

—> Purchase or Repair:
#JLG by Colin Crown on 2014-07-29 11:24
The control unit on JLG AU3019 1600258 is malfunctioning, resulting in a halt in production. Immediate repair is required to resume operations smoothly.

—> Purchase or Repair:
#JLG by Chinmaya on 2013-04-12 05:15
One of the drives or boards on the JLG Smart System 1600258 just failed. Need to investigate and replace ASAP to get this machine back up and running.

—> Purchase or Repair:
#JLG by Larry Spleas on 2014-12-27 06:06
Hello, I'm inquiring about part number JLG AU3019 1600289 which is a Control Module. My client is experiencing issues with this part and would like to get more information on repair or replacement options. Thank you.

—> Purchase or Repair:
#JLG by pepet on 2014-11-18 13:25
Hello, I am looking to get the JLG 1600258 controller fixed or replaced. Could you please let me know if it can be repaired or if a new one needs to be purchased? It's on my to-do list, and I want to take care of it as soon as possible. Thank you!

—> Purchase or Repair:
#JLG by GATTI, on 2015-07-10 01:06
JLG AU3019 1600258 controller not responding to any input commands.

—> Purchase or Repair:
#JLG by Dennis McCollums on 2012-01-17 13:45
The JLG Smart System AU3019 controller is not working.

—> Purchase or Repair:
#JLG by scott smith on 2013-02-25 10:48
We experienced downtime on unit JLG 1600286 due to a control issue for the aerial work platform. It happened during the morning shift today. Can you provide a quick update on the situation before the next shift starts?

—> Purchase or Repair:
#JLG Smart System by George Katinios on 2010-08-21 16:30
Hello, I am reaching out regarding JLG Smart System AU3019 1600286, an Aerial Work Platforms Controller that requires service. Can you please provide information on troubleshooting and repair options for this specific part number? Thank you.

—> Purchase or Repair:
#JLG by shirlee caputo on 2012-08-05 02:24
Do you have a JLG AU3019 1600286 controller available for sale or repair? Production is down and we need to keep things running.

—> Purchase or Repair:
#JLG by Hosawi on 2014-03-25 04:30
The JLG AU3019 1600289 is down due to a faulty Control Module. Needs to be checked and replaced as soon as possible. Thanks!

—> Purchase or Repair:
#JLG by subhashis bag on 2022-02-28 20:18
The Smart System Control on JLG 1600286 is malfunctioning, causing a complete halt in production. This issue needs immediate attention from your repair service to get the line up and running again as soon as possible.

—> Purchase or Repair:
#JLG by Chiranjeevi Raju on 2012-05-03 07:18
Hello, I am interested in acquiring the JLG 1600346 PROA70481 Power Module for our equipment. Could you please provide information on pricing and availability? We are looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#JLG by Strickland on 2014-05-05 20:20
Do you have a replacement JLG AU3019 1600258 Control Module available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:
#JLG by Albayrak on 2015-08-13 03:20
Please provide me with more information about your JLG AU3019 1600258 controller unit so I can assist you in locating a replacement or repair option. I will check if it is still supported and if parts are available for it.

—> Purchase or Repair:
#JLG by Questo on 2015-07-09 10:31
JLG E300AJP 1600292 showing error message "Platform Controls Fail" and not responding to any commands.

—> Purchase or Repair:
#JLG by Cody Gillean on 2015-07-11 10:20
The JLG AU3019 1600286 is showing the error code 345. The Smart System drive is not responding, and the equipment is currently down. Please advise on next steps to troubleshoot and resolve the issue

—> Purchase or Repair:
#JLG by frice on 2015-07-17 18:20
JLG AU3019 1600258 controller not responding to commands.

—> Purchase or Repair:
#JLG by nicholas bohn on 2012-02-18 06:17
Can the JLG 1600346 PROA70481 power module be repaired or purchased? I'm hoping to check this off my to-do list.

—> Purchase or Repair:
#JLG by alberto on 2014-12-31 04:54
Do you have a replacement Control Module available for JLG AU3019 1600258 to keep production running?

—> Purchase or Repair:
#JLG by Jonathan Tomlinson on 2015-06-22 19:12
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.

—> Purchase or Repair:
#JLG by gomes on 2014-02-13 06:58
Do you have a JLG 1600258 controller available for sale or repair? Production is on hold and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Keith Feeney on 2014-12-12 16:16
The JLG AU3019 1600289 is down and showing Error Code 34. Control Module appears faulty as the platform will not raise/lower properly. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:
#JLG by walters on 2012-09-21 18:47
Hello, I am inquiring about part number 1600286 for a JLG AU3019 controller. My client is experiencing issues with this part and may require repair or replacement. Could you provide me with more information on this component and potential solutions? Thank you.

—> Purchase or Repair:
#JLG by S P Kar on 2008-10-17 09:22
The JLG AU3019 1600258 Smart System Controller is not working.

—> Purchase or Repair:
#JLG by Vepa on 2013-06-07 18:40
Hello, I'm interested in purchasing the JLG 1600286 Controller. I'm trying to confirm if this is the correct model for our needs. Can you please provide details on the pricing and availability? We are eager to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Anhishek Agarwal on 2013-07-22 20:32
Need assistance with JLG Smart System 1600258 for an aerial work platform. The controller seems unresponsive, and we require urgent repairs. Please reach out if you can help.

—> Purchase or Repair:
#JLG by ASHIS MANDAL on 2013-10-11 11:42
The JLG 1600286 control board is not working and needs attention.

—> Purchase or Repair:
#JLG by Robert Bombard on 2014-04-04 12:29
I'm reporting that the JLG AU3019 1600258 control module malfunctioned, causing downtime at 845 AM today. Need a quick resolution before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by A. W. Smith Consulting on 2012-03-28 16:01
The unit that controls the equipment in our warehouse seems to be malfunctioning. It's not responding as usual and behaving erratically. Please help check and fix the issue with the JLG Smart System AU3019 controller. Thank you!

—> Purchase or Repair:
#JLG by CATHY KANALEY on 2015-08-07 16:20
We experienced downtime with the JLG MOS 60 D 631/40077 due to issues with the DC Motor Controller. The incident occurred today during the morning shift. Your

—> Purchase or Repair:
#JLG by fabiio on 2015-08-27 22:30
Hello, I'm reaching out regarding a JLG AU1830 631/40038 DC Motor Controller that stopped working. We urgently need repair information. Can you please provide details on fixing or replacing this component? Thank you.

—> Purchase or Repair:
#JLG Start System by Lemmon on 2016-03-19 21:03
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by MLIKAN on 2015-12-29 07:36
Hello, I'm inquiring about an issue with a JLG AU3019 1600286 Smart System drive. Can you provide some information or assistance with this specific part? Thank you.

—> Purchase or Repair:
#JLG by navarro on 2014-12-31 15:54
I'm interested in purchasing a JLG AU3019 1600258 Control Unit but I'm not 100% sure if it's the correct model. Could you please provide me with pricing and availability information? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#Jlg Curtis Instruments by bllessinger on 2016-01-06 10:03
Hello, I am in need of a replacement Jlg Curtis Instruments 17400700 joystick for production. Do you have any available for sale or repair? Thank you.

—> Purchase or Repair:
#JLG by Latsch on 2014-05-01 10:20
Do you have a JLG AU3019 1600258 Control Module available for sale or repair? The unit went down and we need it urgently to keep production running.

—> Purchase or Repair:
#JLG by jose gonçalves on 2014-09-19 02:44
JLG 1600258 Controller is malfunctioning, causing production line downtime. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.