JLG Service & Repair Forum

I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module is not functioning properly, causing the machine to act up. I'm unsure about the exact details of this model, but it might need some attention.

—> Purchase or Repair: Ticket Image

— Posted by Natarajan Subbiah on 2014-12-25

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by Garth on 2015-07-24 17:43
Hello, I'm reaching out regarding the JLG AU1830 631/40038 DC Motor Controller. We are looking for information on whether this unit is still supported or if replacement parts are available. Your assistance in identifying repair options or providing guidance on the availability of parts would be grea…Purchase or Repair: Ticket Image...
Show More
#JLG Start System by VICTOR CHANG on 2016-02-10 03:03
The JLG Start System AU3019 1600258 is not functioning properly. Maintenance team needs assistance with the controller.

—> Purchase or Repair:
#JLG by Aurelio B. Tormes on 2013-07-18 20:55
I'm following up again regarding the JLG Smart System 1600258. The unit is still down. Please provide an update or arrange for necessary repairs immediately. Thank you.

—> Purchase or Repair:
#JLG by Gustavo Diaz on 2025-04-07 17:43
: My JLG PROA70481 1600346 controller is experiencing intermittent issues where it intermittently stops working properly, causing the boom to malfunction. I'm seeking information on repair costs and whether a replacement unit would be more cost-effective in this instance. Could you please provide me…Purchase or Repair: Ticket Image...
Show More
#JLG by LOUIS on 2014-09-06 18:20
Hi team, I wanted to quickly report an issue with the JLG 1600286 controller. It malfunctioned yesterday at 300 PM, causing downtime on the production line. Could you please look into it and provide feedback before the next shift begins? Thank you.

—> Purchase or Repair:
#JLG by Tendam on 2014-11-03 02:57
The JLG AU3019 1600289 experienced downtime due to a faulty Control Module. This occurred on . Looking to resolve the issue

—> Purchase or Repair:
#JLG by Silvia on 2012-09-28 00:59
The JLG AU3019 1600286 is showing error code E123 and not responding to any commands. Equipment is completely unresponsive. Please advise on next steps to troubleshoot and repair.

—> Purchase or Repair:
#JLG by Luchyk on 2013-08-08 08:32
Hello, we have a JLG Smart System 1600258 controller for an aerial work platform that has stopped working. We need a replacement but cannot find one. Can you provide repair information for this? Thank you.

—> Purchase or Repair:
#JLG by M HASSAN on 2015-01-06 02:41
The JLG E300AJP 1600292 articulator is not moving smoothly and is making strange noises while in operation.

—> Purchase or Repair:
#JLG Start System by Lemmon on 2016-03-19 21:03
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by Gulsah SONMEZ on 2013-02-19 01:27
I noticed that the DC motor controller on the JLG 7013310 631/40038 seems to have stopped working properly. It may be affecting the machine's performance but I'm not entirely sure. I recommend having a technician take a look at it to diagnose and resolve the issue.

—> Purchase or Repair:
#JLG by Salter on 2014-11-26 13:14
Could you please confirm if the JLG 59110003 1600292 Power Supply model is still supported or if replacement parts are available? We need to determine the best course of action for repair or replacement. Thank you.

—> Purchase or Repair:
#JLG by post on 2015-05-27 00:54
Hi, the JLG AU1830 631/40038 is displaying error code E123. Equipment is not responding to controller input. Please advise on next steps to troubleshoot and resolve the issue.

—> Purchase or Repair:
#JLG by Lindberg on 2012-02-12 16:14
Please provide me with more information about the JLG 1600346 PROA70481 power module. I'm trying to locate a possible replacement or repair option for this unit, but need to know if it is still supported or if parts are available. Thank you.

—> Purchase or Repair:
#JLG by Ron Ashlock on 2015-07-27 04:20
My JLG E300AJP 1600292 articulator is not extending fully when in use. Seeking repair service as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by fabiio on 2015-08-27 22:30
Hello, I'm reaching out regarding a JLG AU1830 631/40038 DC Motor Controller that stopped working. We urgently need repair information. Can you please provide details on fixing or replacing this component? Thank you.

—> Purchase or Repair:
#JLG by Darshak Kothari on 2013-07-17 23:55
the JLG Smart System 1600258 on one of the AWP units went down mid-shift. Please troubleshoot and repair it first thing in the morning to avoid further delays. Thanks!

—> Purchase or Repair:
#JLG by John Ryu on 2012-12-21 22:40
The power module unit with serial number JLG 1600346 PROA70481 is not working and needs maintenance attention.

—> Purchase or Repair:
#JLG by Jonathan Tomlinson on 2015-06-22 19:12
issue with JLG AU1830 631/40038 - DC Motor Controller just failed. Need to troubleshoot ASAP.

—> Purchase or Repair:
#JLG by David Strodel on 2012-04-30 09:08
The JLG Smart System AU3019 controller is malfunctioning, causing a halt in production. We need immediate assistance to resolve this issue and get the production line back up and running. Please prioritize this repair to minimize downtime.

—> Purchase or Repair:
#JLG by SHEET on 2013-06-02 16:27
Please provide an update on the status of the JLG 1600286 control for the aerial work platform. It remains inoperable, and we urgently require assistance. Your

—> Purchase or Repair:
#JLG by Seje on 2013-08-13 21:32
Control board on JLG 1600286 just went down, drive system affected. Need urgent repair.

—> Purchase or Repair:
#JLG by BRYAN FARR on 2014-12-23 23:06
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.

—> Purchase or Repair:
#JLG by scott smith on 2013-02-25 10:48
We experienced downtime on unit JLG 1600286 due to a control issue for the aerial work platform. It happened during the morning shift today. Can you provide a quick update on the situation before the next shift starts?

—> Purchase or Repair:
#JLG by M.Woollacott on 2015-08-05 09:20
JLG AU3019 1600258 controller not responding.

—> Purchase or Repair:
#JLG by TC CHOU on 2015-08-15 07:20
Hi there, Could you please provide repair information for a JLG E300AJP 1600292 Articulator? Our machine has stopped working and we need a replacement part urgently. Thank you.

—> Purchase or Repair:
#JLG by Stoll on 2015-07-24 11:43
My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair:
#JLG by VIPIN on 2013-08-14 16:32
The JLG 1600286 is showing error code E002 on the control board, causing the equipment to be non-operational. Please advise on troubleshooting steps or repairs needed to get it back up and running. Thank you.

—> Purchase or Repair:
#JLG by Lazar on 2015-07-22 07:20
The JLG 7013310 631/40038 DC Motor Controller is not working as reported.

—> Purchase or Repair:
#JLG by sonnico elsisura on 2014-02-17 11:58
Currently experiencing a malfunction on the production line attributed to a faulty JLG 1600258 controller. Urgent attention and repair needed to resume operations

—> Purchase or Repair:
#JLG by essien on 2013-08-10 03:32
Hi, we're looking for repair info on a JLG 1600286 control board. Can you provide details ASAP? Thanks!

—> Purchase or Repair:
#JLG by GATTI, on 2015-07-10 01:06
JLG AU3019 1600258 controller not responding to any input commands.

—> Purchase or Repair:
#JLG by Tim Peel on 2015-07-22 10:20
Can you repair my JLG E300AJP 1600292 or do you have another one available for sale? Production is on hold. Thank you.

—> Purchase or Repair:
#JLG by Fábio on 2013-04-18 12:48
The JLG 1600286 controller unit is not functioning properly. Maintenance team needs to check and possibly repair it.

—> Purchase or Repair:
#JLG by divya on 2014-12-25 05:44
Do you have a replacement JLG 59110003 Power Supply available for purchase or repair? Our unit went down, and it's crucial to keep our production running smoothly. Thank you.

—> Purchase or Repair:
#JLG by MONTGOMERY on 2013-07-17 08:44
Experiencing issues with JLG 1600286 control board, not functioning properly. Need assistance to repair industrial unit. Thank you in advance for your help.

—> Purchase or Repair:
#JLG by Barren on 2012-06-14 00:48
Hello, we have a JLG Smart System AU3019 controller that needs repair. Could you please provide information on the services you offer for this specific part number? Thank you.

—> Purchase or Repair:
#JLG by John Vegh on 2015-01-09 19:41
Hi there, could you please provide repair info for a JLG AU1830 631/40038 DC Motor Controller? We need a replacement part urgently. Thanks!

—> Purchase or Repair:
#JLG by Alessandro Panichi on 2012-02-22 15:56
JLG AU3019 1600286 Controller not powering up, preventing machine operation.

—> Purchase or Repair:
#JLG by Syed Mohammed Hussain on 2015-03-14 12:40
Hello, this is a follow-up regarding the JLG AU1830 631/40038 DC Motor Controller. The unit is still down. Please provide an update as soon as possible. Thank you.

—> Purchase or Repair:
#JLG by Bob Cramsie on 2014-03-15 05:43
The unit with part number JLG 59110003 and serial number 1600292 appears to be a power supply. It's not working and needs maintenance.

—> Purchase or Repair:
#JLG by nicholas kosloski on 2013-04-05 11:46
Can the JLG 7013310 631/40038 DC motor controller be repaired or purchased as a replacement? Trying to check this off my to-do list.

—> Purchase or Repair:
#JLG by Loretta Chadwick on 2015-07-22 06:20
Hello, I am reaching out on behalf of my client regarding an issue with a JLG MOS 60 D 631/40077 DC Motor Controller. We are in need of assistance to get this matter resolved

—> Purchase or Repair:
#JLG by Close on 2013-07-04 00:39
The control board on JLG 1600286 is malfunctioning, causing a halt in production. Urgent repair service needed to resume operations immediately.

—> Purchase or Repair:
#JLG by pasha on 2013-08-05 03:32
We have a critical issue with JLG 1600286 Controller affecting the production line. It's failing to provide necessary commands, halting our operations. Urgent repair is needed to avoid further downtime.

—> Purchase or Repair:
#JLG by Rachel Nachum on 2013-07-23 19:32
Hello, could you please provide repair information for JLG 1600286 control for aerial work platform? Our equipment is down, and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#JLG by Garay on 2013-08-19 01:32
The JLG Smart System 1600258 controller is malfunctioning, causing a halt in the aerial work platform production line. We need urgent repair service to address this issue

—> Purchase or Repair:
#JLG by K.M.MADHAN on 2012-07-25 18:59
Please provide an update on the status of the JLG 1600346 PROA70481 power module. It is still not functioning, and we require assistance immediately.

—> Purchase or Repair:
#JLG by Qualheim on 2014-12-21 11:44
just a heads up JLG 1600258 controller has crapped out. Need to fix it before next shift.

—> Purchase or Repair:
#JLG by Rekman on 2013-05-02 18:50
There seems to be an issue with the JLG 1600286 Controller. Maintenance team is currently working on it.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.