JLG Service & Repair Forum

The JLG AU1830 631/40038 is displaying the error code ABC123 repeatedly, and the equipment is not responding to any commands. Please advise on next steps for troubleshooting and resolving this issue

—> Purchase or Repair: Ticket Image

— Posted by He on 2015-08-08

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "JLG"

If you need your JLG unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 491 Comments

#JLG by mano on 2013-08-19 18:32
The DC motor controller (JLG 7013310 631/40038) is exhibiting unusual behavior, not performing as it normally does. It requires further inspection to diagnose the issue accurately.

—> Purchase or Repair:
#JLG by Ltd., on 2013-08-14 20:32
The JLG 1600286 control for the aerial work platform is malfunctioning and the unit went down mid-shift. Please have someone look into this issue. Thank you!

—> Purchase or Repair:
#JLG by walters on 2012-09-21 18:47
Hello, I am inquiring about part number 1600286 for a JLG AU3019 controller. My client is experiencing issues with this part and may require repair or replacement. Could you provide me with more information on this component and potential solutions? Thank you.

—> Purchase or Repair:
#JLG by Gulsah SONMEZ on 2013-02-19 01:27
I noticed that the DC motor controller on the JLG 7013310 631/40038 seems to have stopped working properly. It may be affecting the machine's performance but I'm not entirely sure. I recommend having a technician take a look at it to diagnose and resolve the issue.

—> Purchase or Repair:
#JLG by blannybuS on 2015-08-05 00:20
I'm reporting a downtime incident with the JLG AU3019 1600258 due to an issue with the controller. Can you provide a quick overview of what happened and when? It's crucial to address this before the next shift begins.

—> Purchase or Repair:
#JLG by Tanyadol on 2012-10-12 11:15
JLG AU3019 1600286 controller not responding, preventing machine operation.

—> Purchase or Repair:
#JLG by William Bacon on 2016-06-01 11:22
There's an issue with the DC Motor Controller in JLG MOS 90C 631/40234. This is affecting the production line and we need immediate repair to resume operations

—> Purchase or Repair:
#JLG by Firma on 2012-02-08 22:33
The JLG AU3019 1600286 controller unit is not working.

—> Purchase or Repair:
#JLG by George Kolacny on 2013-02-26 07:28
The JLG 1600286 controller is exhibiting unusual behavior in the warehouse. It is not performing its normal functions and acting strangely.

—> Purchase or Repair:
#JLG by moss on 2014-02-12 01:58
The JLG 1600286 controller is malfunctioning, leading to critical downtime on the production line. Urgent repair is needed to ensure operations resume

—> Purchase or Repair:
#JLG by Garay on 2013-08-19 01:32
The JLG Smart System 1600258 controller is malfunctioning, causing a halt in the aerial work platform production line. We need urgent repair service to address this issue

—> Purchase or Repair:
#JLG by GADEX on 2013-07-31 17:32
Could the JLG Smart System 1600258 be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#JLG by JJ Smith on 2015-01-09 18:41
Hello, I'm interested in the JLG MOS 60 D 631/40077 DC Motor Controller. Can you please provide me with information on pricing and availability? I'm trying to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by GeorgeCib on 2013-08-03 04:32
Looking for a repair service for my JLG 1600286 control unit. The aerial work platform is not responding to commands. Need immediate assistance to get it back up and running.

—> Purchase or Repair:
#JLG by William Cathey on 2013-11-02 10:52
Hello, I am reaching out on behalf of a client in need of assistance with a JLG 7013310 631/40038, which is a DC motor controller. Can you please provide information on repair services or troubleshooting steps for this part? Thank you.

—> Purchase or Repair:
#JLG by Jabes on 2015-07-27 16:20
It seems like there might be an issue with the controller on your JLG AU3019 1600258. It's not working as expected. I recommend having a professional technician take a look to diagnose the problem accurately.

—> Purchase or Repair:
#JLG by Casey worcester on 2014-12-15 17:44
I'm currently experiencing an issue with the JLG AU3019 1600258. It seems like the Control Module has stopped working. I'm unsure about the specific functionality of this model, but it needs attention.

—> Purchase or Repair:
#JLG by Nikola on 2015-11-17 20:49
Please provide assistance with JLG E300AJP 1600292, an Articulator. Thank you.

—> Purchase or Repair:
#JLG by Vepa on 2013-06-07 18:40
Hello, I'm interested in purchasing the JLG 1600286 Controller. I'm trying to confirm if this is the correct model for our needs. Can you please provide details on the pricing and availability? We are eager to source one quickly. Thank you.

—> Purchase or Repair:
#JLG by Joe Stacy on 2015-08-18 17:25
The JLG AU1830 631/40038 DC Motor Controller in unit XYZ went down mid-shift. Requires attention and troubleshooting. Please check and resolve asap. Thanks!

—> Purchase or Repair:
#JLG by Luis Buena on 2012-08-05 23:24
Hello, I need repair info for a JLG 1600346 PROA70481 Power module that stopped working. Can you provide guidance on how to fix or replace it ASAP? Thank you.

—> Purchase or Repair:
#JLG by julien on 2012-06-14 02:48
the JLG Smart System AU3019 controller on unit #123 went down mid-shift. Please look into it first thing in the morning to prevent any disruptions. Thanks!

—> Purchase or Repair:
#JLG by BOULIANNE on 2013-02-25 06:48
Control board on JLG 1600286 not responding, halting production.

—> Purchase or Repair:
#JLG by Valeria Sharova on 2014-12-17 19:44
Hi, we have a JLG 59110003 1600292 power supply that stopped working. Can you please provide repair info or a replacement? Your quick response is appreciated. Thanks!

—> Purchase or Repair:
#JLG by Stoll on 2015-07-24 11:43
My JLG AU3019 1600258 controler is malfunctioning, and I need it repaired as soon as possible to resume work on the industrial unit.

—> Purchase or Repair:
#JLG by Al Aguiniga on 2015-07-19 20:20
We experienced downtime on the JLG 7013310 631/40038 DC Motor Controller unit earlier today. Can you provide some insight into what caused the issue and when it occurred? Your quick response would be greatly appreciated before the next shift begins. Thank you!

—> Purchase or Repair:
#JLG by Silvia on 2012-09-28 00:59
The JLG AU3019 1600286 is showing error code E123 and not responding to any commands. Equipment is completely unresponsive. Please advise on next steps to troubleshoot and repair.

—> Purchase or Repair:
#JLG by SeekersISeek on 2013-08-17 01:01
The JLG 1600286 control for the aerial work platform has a failed drive or board. Need to diagnose and replace ASAP to get it back up and running.

—> Purchase or Repair:
#JLG by Robert Bombard on 2014-04-04 12:29
I'm reporting that the JLG AU3019 1600258 control module malfunctioned, causing downtime at 845 AM today. Need a quick resolution before the next shift begins. Thank you.

—> Purchase or Repair:
#JLG by Briggs on 2013-08-16 08:01
The JLG 1600286 is a controller that the maintenance team is having issues with. They are looking for assistance in troubleshooting the unit.

—> Purchase or Repair:
#JLG by BRYAN FARR on 2014-12-23 23:06
We experienced unexpected downtime with JLG AU3019 1600258 due to a faulty control module earlier today. Urgently need clarification to prevent a repeat with the next shift. Thank you.

—> Purchase or Repair:
#JLG by Gérald on 2015-07-13 01:20
Hello, I'm reaching out on behalf of a client with a JLG AU3019 1600286 equipped with a Smart System drive. The client is experiencing issues with the equipment and requires assistance. Can you please provide more information on possible solutions or repairs needed for this specific model? Thank you…Purchase or Repair: Ticket Image...
Show More
#JLG by bryan on 2008-06-25 09:06
The JLG AU3019 1600258 Smart System Controller unit is not working.

—> Purchase or Repair:
#JLG Smart System by PEIRIS on 2010-02-17 11:24
The JLG Smart System AU3019 1600286 is displaying error code E203 and the platform won't elevate. Need assistance to troubleshoot and resolve the issue

—> Purchase or Repair:
#JLG by Rafal on 2014-12-26 15:06
We still have an unresolved issue with the JLG 1600286 controller. Please provide an update or action plan

—> Purchase or Repair:
#JLG by floyd mora on 2014-02-11 04:04
Please provide the necessary details about the JLG 1600286 Controller. We need to check if it is still supported or if parts are available for replacement or repair options. Thank you.

—> Purchase or Repair:
#JLG by Ahmad Omidi on 2013-09-11 05:28
Hey, the JLG 7013310 631/40038 DC motor controller went down mid-shift. Please check it out asap tomorrow. Thanks!

—> Purchase or Repair:
#JLG by danilo on 2015-01-06 09:41
Please advise if the JLG E300AJP 1600292 Articulator unit is still supported and if replacement parts are available for this older model. Thank you.

—> Purchase or Repair:
#JLG by Andrew Walford on 2013-08-01 14:32
The control board on JLG 1600286 is behaving abnormally. It is not responding as it typically does, and the unit is not functioning normally.

—> Purchase or Repair:
#JLG by Kathleen Kosman on 2014-12-22 17:06
Could you please confirm if the JLG 1600292 controller can be repaired or if it needs to be replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#JLG by Mihael on 2008-11-10 18:10
Hello, this is a follow-up regarding the JLG AU3019 1600258 Smart System Controller. The unit is still down. Please provide an update

—> Purchase or Repair:
#JLG by Jesus Mª Matarranz Leon on 2013-07-29 03:32
Hello, I am interested in the JLG 1600286 control for the aerial work platform. I am trying to purchase this unit quickly but want to confirm if this is the right model. Could you please provide information on pricing and availability? Thank you.

—> Purchase or Repair:
#JLG by Gary Mrosko on 2008-06-23 07:52
Experiencing issues with JLG AU3019 1600258 Smart System Controller. Need repair service ASAP.

—> Purchase or Repair:
#JLG by Stephen Warren on 2013-08-22 15:32
The JLG 1600286 control board is displaying error code E123 and the machine is not responding to any commands. Need urgent assistance to troubleshoot and resolve the issue.

—> Purchase or Repair:
#JLG Smart System by Waldyr on 2008-01-24 20:48
Hello, I am inquiring about the JLG Smart System AU3019 1600258. My client is experiencing issues with the controller. Can you please provide more information on repair options and estimated costs? Thank you.

—> Purchase or Repair:
#JLG by Squierpzr on 2013-07-26 12:32
Hey, the JLG Smart System 1600258 on Unit #123 malfunctioned this morning at 930 AM, causing downtime for the aerial work platform. Could you please let me know what went wrong and whether it has been resolved before the next shift comes in? Thank you.

—> Purchase or Repair:
#JLG by AMERICA on 2014-11-01 11:57
Hi there, I'm interested in purchasing a JLG AU3019 1600258 Control Module. I wanted to check with you about the pricing and availability as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#JLG by gomes on 2014-02-13 06:58
Do you have a JLG 1600258 controller available for sale or repair? Production is on hold and we need to get it up and running as soon as possible. Thank you.

—> Purchase or Repair:
#JLG Start System by Lemmon on 2016-03-19 21:03
Hello, I'm interested in purchasing the JLG Start System AU3019 1600258 Controller. I am unsure if this is the correct model, but my team recommended I reach out to inquire further. Can you please provide information on pricing and availability as I am looking to source one quickly? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#JLG by rami izhaky on 2013-05-24 15:05
JLG 1600286 controller not responding.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.